On Thu, 2018-01-18 at 10:09 -0500, Prarit Bhargava wrote:
> Note on testing: I've tested this on several ARM64 and x86 boxes (only
> earlycon, console=ttyS0,115200, and with both options), verified that
> functionality on ARM64 has not changed (ie, CONFIG_ACPI_SPCR_TABLE is
> always =y), and verified functionality when !CONFIG_ACPI_SPCR_TABLE on
> x86.
>
> P.
>
> ----8<----
>
> SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup an
> early console.
>
> General fixes include updating Documentation & Kconfig (for x86), updating
> comments, and changing parse_spcr() to acpi_parse_spcr(), and
> earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be more
> descriptive.
>
> On x86, many systems have a valid SPCR table but the table version is not
> 2 so the table version check must be a warning.
>
> On ARM64 when the kernel parameter earlycon is used both the early console
> and console are enabled. On x86, only the earlycon should be enabled by
> by default. Modify acpi_parse_spcr() to allow options for initializing
> the early console and console separately.
>
> Signed-off-by: Prarit Bhargava <pra...@redhat.com>
> Cc: linux-a...@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux...@vger.kernel.org
> Cc: linux-ser...@vger.kernel.org
> Cc: Bhupesh Sharma <bhsha...@redhat.com>
> Cc: Lv Zheng <lv.zh...@intel.com>
> Cc: Thomas Gleixner <t...@linutronix.de>
> Cc: Ingo Molnar <mi...@redhat.com>
> Cc: "H. Peter Anvin" <h...@zytor.com>
> Cc: x...@kernel.org
> Cc: Jonathan Corbet <cor...@lwn.net>
> Cc: Catalin Marinas <catalin.mari...@arm.com>
> Cc: Will Deacon <will.dea...@arm.com>
> Cc: "Rafael J. Wysocki" m...@rjwysocki.net>
> Cc: Timur Tabi <ti...@codeaurora.org>
> Cc: graeme.greg...@linaro.org
> Cc: mark.sal...@redhat.com
> ---
> Documentation/admin-guide/kernel-parameters.txt | 9 +++++---
> arch/arm64/kernel/acpi.c | 4 ++--
> arch/x86/kernel/acpi/boot.c | 3 +++
> drivers/acpi/Kconfig | 7 +++++-
> drivers/acpi/spcr.c | 29
> +++++++++++++------------
> drivers/tty/serial/earlycon.c | 15 +++++--------
> include/linux/acpi.h | 7 ++++--
> include/linux/serial_core.h | 4 ++--
> 8 files changed, 44 insertions(+), 34 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt
> b/Documentation/admin-guide/kernel-parameters.txt
> index 46b26bfee27b..6f519230ed34 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -915,9 +915,12 @@
>
> earlycon= [KNL] Output early console device and options.
>
> - When used with no options, the early console is
> - determined by the stdout-path property in device
> - tree's chosen node.
> + [ARM64] The early console is determined by the
> + stdout-path property in device tree's chosen node,
> + or determined by the ACPI SPCR table.
> +
> + [X86] When used with no options the early console is
> + determined by the ACPI SPCR table.
>
> cdns,<addr>[,options]
> Start an early, polled-mode console on a Cadence
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index b3162715ed78..2aa5609def27 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -230,10 +230,10 @@ void __init acpi_boot_table_init(void)
>
> done:
> if (acpi_disabled) {
> - if (earlycon_init_is_deferred)
> + if (earlycon_acpi_spcr_enable)
> early_init_dt_scan_chosen_stdout();
> } else {
> - parse_spcr(earlycon_init_is_deferred);
> + acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
> if (IS_ENABLED(CONFIG_ACPI_BGRT))
> acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
> }
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index f4c463df8b08..0bf6a58f7a6d 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -36,6 +36,7 @@
> #include <linux/ioport.h>
> #include <linux/pci.h>
> #include <linux/efi-bgrt.h>
> +#include <linux/serial_core.h>
>
> #include <asm/e820/api.h>
> #include <asm/irqdomain.h>
> @@ -1626,6 +1627,8 @@ int __init acpi_boot_init(void)
> if (!acpi_noirq)
> x86_init.pci.init = pci_acpi_init;
>
> + /* Do not enable ACPI SPCR console by default */
> + acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
> return 0;
> }
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 46505396869e..ddcb5f40e8ee 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
> endif
>
> config ACPI_SPCR_TABLE
> - bool
> + bool "ACPI Serial Port Console Redirection Support"
> + default y if X86
> + help
> + Enable support for Serial Port Console Redirection (SPCR) Table.
> + This table provides information about the configuration of the
> + earlycon console.
>
> config ACPI_LPIT
> bool
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> index 324b35bfe781..89e97d21a89c 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -21,7 +21,7 @@
> * occasionally getting stuck as 1. To avoid the potential for a hang, check
> * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
> * implementations, so only do so if an affected platform is detected in
> - * parse_spcr().
> + * acpi_parse_spcr().
> */
> bool qdf2400_e44_present;
> EXPORT_SYMBOL(qdf2400_e44_present);
> @@ -74,19 +74,21 @@ static bool xgene_8250_erratum_present(struct
> acpi_table_spcr *tb)
> }
>
> /**
> - * parse_spcr() - parse ACPI SPCR table and add preferred console
> + * acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
> *
> - * @earlycon: set up earlycon for the console specified by the table
> + * @enable_earlycon: set up earlycon for the console specified by the table
> + * @enable_console: setup the console specified by the table.
> *
> * For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
> * defined to parse ACPI SPCR table. As a result of the parsing preferred
> - * console is registered and if @earlycon is true, earlycon is set up.
> + * console is registered and if @enable_earlycon is true, earlycon is set up.
> + * If @enable_console is true the system console is also configured.
> *
> * When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
> * from arch initialization code as soon as the DT/ACPI decision is made.
> *
> */
> -int __init parse_spcr(bool earlycon)
> +int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
> {
> static char opts[64];
> struct acpi_table_spcr *table;
> @@ -105,11 +107,8 @@ int __init parse_spcr(bool earlycon)
> if (ACPI_FAILURE(status))
> return -ENOENT;
>
> - if (table->header.revision < 2) {
> - err = -ENOENT;
> - pr_err("wrong table version\n");
> - goto done;
> - }
> + if (table->header.revision < 2)
> + pr_info("SPCR table version %d\n", table->header.revision);
>
> if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> switch (ACPI_ACCESS_BIT_WIDTH((
> @@ -185,7 +184,7 @@ int __init parse_spcr(bool earlycon)
> */
> if (qdf2400_erratum_44_present(&table->header)) {
> qdf2400_e44_present = true;
> - if (earlycon)
> + if (enable_earlycon)
> uart = "qdf2400_e44";
> }
>
> @@ -205,11 +204,13 @@ int __init parse_spcr(bool earlycon)
>
> pr_info("console: %s\n", opts);
>
> - if (earlycon)
> + if (enable_earlycon)
> setup_earlycon(opts);
>
> - err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> -
> + if (enable_console)
> + err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> + else
> + err = 0;
> done:
> acpi_put_table((struct acpi_table_header *)table);
> return err;
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 4c8b80f1c688..870e84fb6e39 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -197,25 +197,20 @@ int __init setup_earlycon(char *buf)
> }
>
> /*
> - * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
> - * command line does not start DT earlycon immediately, instead it defers
> - * starting it until DT/ACPI decision is made. At that time if ACPI is
> enabled
> - * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
> + * This defers the initialization of the early console until after ACPI has
> + * been initialized.
> */
> -bool earlycon_init_is_deferred __initdata;
> +bool earlycon_acpi_spcr_enable __initdata;
>
> /* early_param wrapper for setup_earlycon() */
> static int __init param_setup_earlycon(char *buf)
> {
> int err;
>
> - /*
> - * Just 'earlycon' is a valid param for devicetree earlycons;
> - * don't generate a warning from parse_early_params() in that case
> - */
> + /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
> if (!buf || !buf[0]) {
> if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
> - earlycon_init_is_deferred = true;
> + earlycon_acpi_spcr_enable = true;
> return 0;
> } else if (!buf) {
> return early_init_dt_scan_chosen_stdout();
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index dc1ebfeeb5ec..9aac8f0ebe23 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1242,9 +1242,12 @@ static inline void acpi_table_upgrade(void) { }
>
> #ifdef CONFIG_ACPI_SPCR_TABLE
> extern bool qdf2400_e44_present;
> -int parse_spcr(bool earlycon);
> +int acpi_parse_spcr(bool enable_earlycon, bool enable_console);
> #else
> -static inline int parse_spcr(bool earlycon) { return 0; }
> +static inline int acpi_parse_spcr(bool enable_earlycon, bool enable_console)
> +{
> + return 0;
> +}
> #endif
>
> #if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 37b044e78333..aefd0e5115da 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -376,10 +376,10 @@ extern int of_setup_earlycon(const struct earlycon_id
> *match,
> const char *options);
>
> #ifdef CONFIG_SERIAL_EARLYCON
> -extern bool earlycon_init_is_deferred __initdata;
> +extern bool earlycon_acpi_spcr_enable __initdata;
> int setup_earlycon(char *buf);
> #else
> -static const bool earlycon_init_is_deferred;
> +static const bool earlycon_acpi_spcr_enable;
> static inline int setup_earlycon(char *buf) { return 0; }
> #endif
>
This looks okay to me. Tested on a variety of arm64 platforms.
Reviewed-by: Mark Salter <msal...@redhat.com>
Tested-by: Mark Salter <msal...@redhat.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
