On Thu, Feb 16, 2017 at 09:43:19AM -0600, Tom Lendacky wrote:
> This patch adds support to the early boot code to use Secure Memory
> Encryption (SME). Support is added to update the early pagetables with
> the memory encryption mask and to encrypt the kernel in place.
>
> The routines to set the encryption mask and perform the encryption are
> stub routines for now with full function to be added in a later patch.
s/full function/functionality/
> A new file, arch/x86/kernel/mem_encrypt_init.c, is introduced to avoid
> adding #ifdefs within arch/x86/kernel/head_64.S and allow
> arch/x86/mm/mem_encrypt.c to be removed from the build if SME is not
> configured. The mem_encrypt_init.c file will contain the necessary #ifdefs
> to allow head_64.S to successfully build and call the SME routines.
That paragraph is superfluous.
> Signed-off-by: Tom Lendacky <thomas.lenda...@amd.com>
> ---
> arch/x86/kernel/Makefile | 2 +
> arch/x86/kernel/head_64.S | 46 ++++++++++++++++++++++++++++++++-
> arch/x86/kernel/mem_encrypt_init.c | 50
> ++++++++++++++++++++++++++++++++++++
> 3 files changed, 96 insertions(+), 2 deletions(-)
> create mode 100644 arch/x86/kernel/mem_encrypt_init.c
>
> diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
> index bdcdb3b..33af80a 100644
> --- a/arch/x86/kernel/Makefile
> +++ b/arch/x86/kernel/Makefile
> @@ -140,4 +140,6 @@ ifeq ($(CONFIG_X86_64),y)
>
> obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o
> obj-y += vsmp_64.o
> +
> + obj-y += mem_encrypt_init.o
> endif
> diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
> index b467b14..4f8201b 100644
> --- a/arch/x86/kernel/head_64.S
> +++ b/arch/x86/kernel/head_64.S
> @@ -91,6 +91,23 @@ startup_64:
> jnz bad_address
>
> /*
> + * Enable Secure Memory Encryption (SME), if supported and enabled.
> + * The real_mode_data address is in %rsi and that register can be
> + * clobbered by the called function so be sure to save it.
> + * Save the returned mask in %r12 for later use.
> + */
> + push %rsi
> + call sme_enable
> + pop %rsi
> + movq %rax, %r12
> +
> + /*
> + * Add the memory encryption mask to %rbp to include it in the page
> + * table fixups.
> + */
> + addq %r12, %rbp
> +
> + /*
> * Fixup the physical addresses in the page table
> */
> addq %rbp, early_level4_pgt + (L4_START_KERNEL*8)(%rip)
> @@ -113,6 +130,7 @@ startup_64:
> shrq $PGDIR_SHIFT, %rax
>
> leaq (PAGE_SIZE + _KERNPG_TABLE)(%rbx), %rdx
> + addq %r12, %rdx
> movq %rdx, 0(%rbx,%rax,8)
> movq %rdx, 8(%rbx,%rax,8)
>
> @@ -129,6 +147,7 @@ startup_64:
> movq %rdi, %rax
> shrq $PMD_SHIFT, %rdi
> addq $(__PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL), %rax
> + addq %r12, %rax
> leaq (_end - 1)(%rip), %rcx
> shrq $PMD_SHIFT, %rcx
> subq %rdi, %rcx
> @@ -162,11 +181,25 @@ startup_64:
> cmp %r8, %rdi
> jne 1b
>
> - /* Fixup phys_base */
> + /*
> + * Fixup phys_base - remove the memory encryption mask from %rbp
> + * to obtain the true physical address.
> + */
> + subq %r12, %rbp
> addq %rbp, phys_base(%rip)
>
> + /*
> + * Encrypt the kernel if SME is active.
> + * The real_mode_data address is in %rsi and that register can be
> + * clobbered by the called function so be sure to save it.
> + */
> + push %rsi
> + call sme_encrypt_kernel
> + pop %rsi
> +
> .Lskip_fixup:
So if we land on this label because we can skip the fixup due to %rbp
being 0, we will skip sme_encrypt_kernel() too.
I think you need to move the .Lskip_fixup label above the
sme_encrypt_kernel call.
> movq $(early_level4_pgt - __START_KERNEL_map), %rax
> + addq %r12, %rax
> jmp 1f
> ENTRY(secondary_startup_64)
> /*
> @@ -186,7 +219,16 @@ ENTRY(secondary_startup_64)
> /* Sanitize CPU configuration */
> call verify_cpu
>
> - movq $(init_level4_pgt - __START_KERNEL_map), %rax
> + /*
> + * Get the SME encryption mask.
> + * The real_mode_data address is in %rsi and that register can be
> + * clobbered by the called function so be sure to save it.
You can say here that sme_get_me_mask puts the mask in %rax, that's why
we do ADD below and not MOV. I know, it is very explicit but this is
boot asm and I'd prefer for it to be absolutely clear.
> + */
> + push %rsi
> + call sme_get_me_mask
> + pop %rsi
> +
> + addq $(init_level4_pgt - __START_KERNEL_map), %rax
> 1:
...
> +#else /* !CONFIG_AMD_MEM_ENCRYPT */
> +
> +void __init sme_encrypt_kernel(void)
> +{
> +}
> +
> +unsigned long __init sme_get_me_mask(void)
> +{
> + return 0;
> +}
> +
> +unsigned long __init sme_enable(void)
> +{
> + return 0;
> +}
Do that:
void __init sme_encrypt_kernel(void) { }
unsigned long __init sme_get_me_mask(void) { return 0; }
unsigned long __init sme_enable(void) { return 0; }
to save some lines.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
