On 09/23/2016 05:45 PM, Shuah Khan wrote: > Move blackfin gptimers-example to samples and remove the Documentation > Makefile. Update samples Kconfig and Makefile to build gptimers-example. > > Signed-off-by: Shuah Khan <shua...@osg.samsung.com>
This patch isn't complete. CONFIG_BUILD_DOCSRC=1 make fails without updating the Makefile and lib/Kconfig.debug I am going to send v2 that is complete. thanks, -- Shuah > --- > Documentation/Makefile | 1 - > Documentation/blackfin/00-INDEX | 4 -- > Documentation/blackfin/Makefile | 5 -- > Documentation/blackfin/gptimers-example.c | 91 > ------------------------------- > samples/Kconfig | 6 ++ > samples/Makefile | 2 +- > samples/blackfin/Makefile | 1 + > samples/blackfin/gptimers-example.c | 91 > +++++++++++++++++++++++++++++++ > 8 files changed, 99 insertions(+), 102 deletions(-) > delete mode 100644 Documentation/Makefile > delete mode 100644 Documentation/blackfin/Makefile > delete mode 100644 Documentation/blackfin/gptimers-example.c > create mode 100644 samples/blackfin/Makefile > create mode 100644 samples/blackfin/gptimers-example.c > > diff --git a/Documentation/Makefile b/Documentation/Makefile > deleted file mode 100644 > index 8435965..0000000 > --- a/Documentation/Makefile > +++ /dev/null > @@ -1 +0,0 @@ > -subdir-y := blackfin > diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX > index c54fcdd..265a1ef 100644 > --- a/Documentation/blackfin/00-INDEX > +++ b/Documentation/blackfin/00-INDEX > @@ -1,10 +1,6 @@ > 00-INDEX > - This file > -Makefile > - - Makefile for gptimers example file. > bfin-gpio-notes.txt > - Notes in developing/using bfin-gpio driver. > bfin-spi-notes.txt > - Notes for using bfin spi bus driver. > -gptimers-example.c > - - gptimers example > diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile > deleted file mode 100644 > index 6782c58..0000000 > --- a/Documentation/blackfin/Makefile > +++ /dev/null > @@ -1,5 +0,0 @@ > -ifneq ($(CONFIG_BLACKFIN),) > -ifneq ($(CONFIG_BFIN_GPTIMERS),) > -obj-m := gptimers-example.o > -endif > -endif > diff --git a/Documentation/blackfin/gptimers-example.c > b/Documentation/blackfin/gptimers-example.c > deleted file mode 100644 > index 283eba9..0000000 > --- a/Documentation/blackfin/gptimers-example.c > +++ /dev/null > @@ -1,91 +0,0 @@ > -/* > - * Simple gptimers example > - * > http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers > - * > - * Copyright 2007-2009 Analog Devices Inc. > - * > - * Licensed under the GPL-2 or later. > - */ > - > -#include <linux/interrupt.h> > -#include <linux/module.h> > - > -#include <asm/gptimers.h> > -#include <asm/portmux.h> > - > -/* ... random driver includes ... */ > - > -#define DRIVER_NAME "gptimer_example" > - > -#ifdef IRQ_TIMER5 > -#define SAMPLE_IRQ_TIMER IRQ_TIMER5 > -#else > -#define SAMPLE_IRQ_TIMER IRQ_TIMER2 > -#endif > - > -struct gptimer_data { > - uint32_t period, width; > -}; > -static struct gptimer_data data; > - > -/* ... random driver state ... */ > - > -static irqreturn_t gptimer_example_irq(int irq, void *dev_id) > -{ > - struct gptimer_data *data = dev_id; > - > - /* make sure it was our timer which caused the interrupt */ > - if (!get_gptimer_intr(TIMER5_id)) > - return IRQ_NONE; > - > - /* read the width/period values that were captured for the waveform */ > - data->width = get_gptimer_pwidth(TIMER5_id); > - data->period = get_gptimer_period(TIMER5_id); > - > - /* acknowledge the interrupt */ > - clear_gptimer_intr(TIMER5_id); > - > - /* tell the upper layers we took care of things */ > - return IRQ_HANDLED; > -} > - > -/* ... random driver code ... */ > - > -static int __init gptimer_example_init(void) > -{ > - int ret; > - > - /* grab the peripheral pins */ > - ret = peripheral_request(P_TMR5, DRIVER_NAME); > - if (ret) { > - printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n"); > - return ret; > - } > - > - /* grab the IRQ for the timer */ > - ret = request_irq(SAMPLE_IRQ_TIMER, gptimer_example_irq, > - IRQF_SHARED, DRIVER_NAME, &data); > - if (ret) { > - printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n"); > - peripheral_free(P_TMR5); > - return ret; > - } > - > - /* setup the timer and enable it */ > - set_gptimer_config(TIMER5_id, > - WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA); > - enable_gptimers(TIMER5bit); > - > - return 0; > -} > -module_init(gptimer_example_init); > - > -static void __exit gptimer_example_exit(void) > -{ > - disable_gptimers(TIMER5bit); > - free_irq(SAMPLE_IRQ_TIMER, &data); > - peripheral_free(P_TMR5); > -} > -module_exit(gptimer_example_exit); > - > -MODULE_LICENSE("BSD"); > diff --git a/samples/Kconfig b/samples/Kconfig > index 85c405f..d67b4b7 100644 > --- a/samples/Kconfig > +++ b/samples/Kconfig > @@ -99,4 +99,10 @@ config SAMPLE_SECCOMP > Build samples of seccomp filters using various methods of > BPF filter construction. > > +config SAMPLE_BLACKFIN_GPTIMERS > + tristate "Build blackfin gptimers sample code -- loadable modules only" > + depends on CONFIG_BLACKFIN && CONFIG_BFIN_GPTIMERS && m > + help > + Build samples of blackfin gptimers sample module. > + > endif # SAMPLES > diff --git a/samples/Makefile b/samples/Makefile > index 1a20169..e17d66d 100644 > --- a/samples/Makefile > +++ b/samples/Makefile > @@ -2,4 +2,4 @@ > > obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ trace_events/ livepatch/ \ > hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/ \ > - configfs/ connector/ v4l/ trace_printk/ > + configfs/ connector/ v4l/ trace_printk/ blackfin/ > diff --git a/samples/blackfin/Makefile b/samples/blackfin/Makefile > new file mode 100644 > index 0000000..89b86cf > --- /dev/null > +++ b/samples/blackfin/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_SAMPLE_BLACKFIN_GPTIMERS) += gptimers-example.o > diff --git a/samples/blackfin/gptimers-example.c > b/samples/blackfin/gptimers-example.c > new file mode 100644 > index 0000000..283eba9 > --- /dev/null > +++ b/samples/blackfin/gptimers-example.c > @@ -0,0 +1,91 @@ > +/* > + * Simple gptimers example > + * > http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers > + * > + * Copyright 2007-2009 Analog Devices Inc. > + * > + * Licensed under the GPL-2 or later. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/module.h> > + > +#include <asm/gptimers.h> > +#include <asm/portmux.h> > + > +/* ... random driver includes ... */ > + > +#define DRIVER_NAME "gptimer_example" > + > +#ifdef IRQ_TIMER5 > +#define SAMPLE_IRQ_TIMER IRQ_TIMER5 > +#else > +#define SAMPLE_IRQ_TIMER IRQ_TIMER2 > +#endif > + > +struct gptimer_data { > + uint32_t period, width; > +}; > +static struct gptimer_data data; > + > +/* ... random driver state ... */ > + > +static irqreturn_t gptimer_example_irq(int irq, void *dev_id) > +{ > + struct gptimer_data *data = dev_id; > + > + /* make sure it was our timer which caused the interrupt */ > + if (!get_gptimer_intr(TIMER5_id)) > + return IRQ_NONE; > + > + /* read the width/period values that were captured for the waveform */ > + data->width = get_gptimer_pwidth(TIMER5_id); > + data->period = get_gptimer_period(TIMER5_id); > + > + /* acknowledge the interrupt */ > + clear_gptimer_intr(TIMER5_id); > + > + /* tell the upper layers we took care of things */ > + return IRQ_HANDLED; > +} > + > +/* ... random driver code ... */ > + > +static int __init gptimer_example_init(void) > +{ > + int ret; > + > + /* grab the peripheral pins */ > + ret = peripheral_request(P_TMR5, DRIVER_NAME); > + if (ret) { > + printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n"); > + return ret; > + } > + > + /* grab the IRQ for the timer */ > + ret = request_irq(SAMPLE_IRQ_TIMER, gptimer_example_irq, > + IRQF_SHARED, DRIVER_NAME, &data); > + if (ret) { > + printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n"); > + peripheral_free(P_TMR5); > + return ret; > + } > + > + /* setup the timer and enable it */ > + set_gptimer_config(TIMER5_id, > + WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA); > + enable_gptimers(TIMER5bit); > + > + return 0; > +} > +module_init(gptimer_example_init); > + > +static void __exit gptimer_example_exit(void) > +{ > + disable_gptimers(TIMER5bit); > + free_irq(SAMPLE_IRQ_TIMER, &data); > + peripheral_free(P_TMR5); > +} > +module_exit(gptimer_example_exit); > + > +MODULE_LICENSE("BSD"); > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
