Jul 8 16:54:00 toshiba kernel: usb 7-1: USB disconnect, address 2
Jul 8 16:54:08 toshiba kernel: usb 7-1: new high speed USB device using address 3
Jul 8 16:54:08 toshiba kernel: midi: probe of 7-1:1.0 failed with error -5
Jul 8 16:54:09 toshiba kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jul 8 16:54:09 toshiba usb-storage: add DEVICE=/proc/bus/usb/007/003 DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:04.0/0000:03:00.2/usb7/7-1/7-1:1.0
Jul 8 16:54:09 toshiba kernel: Vendor: ST340016 Model: A Rev: 0 0
Jul 8 16:54:09 toshiba kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 8 16:54:09 toshiba kernel: SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
Jul 8 16:54:09 toshiba kernel: sdb: assuming drive cache: write through
Jul 8 16:54:09 toshiba kernel: sdb: sdb1
Jul 8 16:54:09 toshiba kernel: Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
Jul 8 16:54:09 toshiba kernel: Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
quando uso hdparm -Tt /dev/sda1, a velocidade medida � : /dev/sda1: Timing buffer-cache reads: 1428 MB in 2.00 seconds = 713.75 MB/sec Timing buffered disk reads: 60 MB in 3.03 seconds = 19.82 MB/sec
Estaria este dispositivo usando USB2 ou USB1 ?
[]'s
Paulino Kenji Sato escreveu:
On Thu, 8 Jul 2004, sirhamacker wrote: Ah... agora ficou mais claro. Parece que o cart�o ou o dispositivo precisa de uma alimenta��o externa de 5Volts, que e o que esse cabo de 3 pontas fornece, fazendo uma 'chupeta' no conector ps2. O HD que vc esta usando tem alimenta��o externa?
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
