Caros companheiros, sobre o modem pctel ja peguei todas
as informa��es dos sites, lista e do zago, e tentei todos os drivers e seus
passo a passo, e depois peguei o driver la no site do Jcmp3 CL8MR pois o
mesmo se referia especificamente ao meu caso, tanto a placa sis810 quanto a
distro CL8 chipset SIS730, e me parece que estou bem pr�ximo veja as
informacoes abaixo.
A instala��o foi sem erros e como ver�o os m�dulos est�o carregados
e tudo, mas quando uso pra conectar via ppp aparecem tr�s mensagens na
janela do programa, primeira " Procurando Modem " , em seguida " Modem
Pronto " e em seguida " Desculpe, mas o modem n�o responde " .
Ja conferi os modulos estao no diretorio certo ~/misc
o link do /dev/ttyS15 com o /dev/modem tambem esta feito
o arquivo modules.conf ja ta modificado para carregar os modulos e
codigo do pais
Inclusive at� a famosa incompatibilidade do m�dulo de som com o
m�dulo do modem esta acontecendo, isto � perco o audio do m�dulo trident
quando carregaram os m�dulos do modem. Tamb�m pelos comandos est�o corretas
a IRQ e as I/O detectadas no comando abaixo. Mas como disse ao tentar
conectar no Kppp d�o as mensagens j� citadas acima.
Se alguem puder me dar uma dica sobre o fato desde j� agrade�o....
Obrigado e um abra�o a todos da lista.
Vilela
Usu�rio Linux 241412 CL5, CL6, CL7, CL8....
Abaixo inicio das mensagens no do Kppp chamado do terminal...
[root@ownerd /root]# kppp
Opener: received SetSecret
Opener: received SetSecret
Opener: received OpenLock
Opener: received OpenDevice
Opener: received RemoveLock
Opener: received RemoveSecret
Opener: received RemoveSecret
Opener: received OpenResolv
Opener: received OpenResolv
Opener: received KillPPPDaemon
[root@ownerd /root]#
[root@ownerd /root]#
[root@ownerd /root]# lsmod
Module Size Used by Tainted: P
ptserial 40896 0 (autoclean)
pctel 1225440 0 (autoclean) [ptserial]
usb-storage 48192 0 (unused)
ide-scsi 7392 0
sg 27972 0 (unused)
scsi_mod 85144 3 [usb-storage ide-scsi sg]
nls_iso8859-1 2880 2 (autoclean)
nls_cp437 4384 2 (autoclean)
vfat 9308 2 (autoclean)
fat 29112 0 (autoclean) [vfat]
supermount 57476 1 (autoclean)
trident 26208 0
soundcore 3492 3 [trident]
ac97_codec 9376 0 [trident]
loop 7984 0 (autoclean)
lvm-mod 44224 0
usb-ohci 17856 0 (unused)
usbcore 48320 1 [usb-storage usb-ohci]
[root@ownerd /root]#
[root@ownerd /root]#
[root@ownerd /root]# dmesg
Linux version 2.4.18-2cl ([EMAIL PROTECTED]) (gcc version 2.95.3
20010315 (release)) #1 Mon Mar 11 01:53:17 BRT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hdb1 5
Initializing CPU#0
Detected 1095.133 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2182.34 BogoMIPS
Memory: 247696k/253888k available (1044k kernel code, 5804k reserved, 298k
data, 228k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 5 for device 00:01.6
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS730
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD300AB-00BVA0, ATA DISK drive
hdb: QUANTUM FIREBALL_TM2110A, ATA DISK drive
hdc: CREATIVE CD-RW RW1210E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63,
UDMA(100)
hdb: 4124736 sectors (2112 MB) w/76KiB Cache, CHS=1023/64/63, DMA
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 < hda5 >
hdb: hdb1 hdb2 hdb3 hdb4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding Swap: 100792k swap-space (priority -1)
Adding Swap: 2008k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 3 for device 00:01.3
PCI: Sharing IRQ 3 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xd0030000, IRQ 3
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 3 for device 00:01.2
PCI: Sharing IRQ 3 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xd0032000, IRQ 3
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xd7d/0x100) is not claimed by any active
driver.
LVM version 1.0.1-rc4(ish)(03/10/2001) module loaded
loop: loaded (max 8 devices)
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.9d, 02:10:38 Mar 11 2002
PCI: Found IRQ 11 for device 00:01.4
trident: SiS 7018 PCI Audio found at IO 0xd000, IRQ 11
ac97_codec: AC97 codec, id: 0x434d:0x4941 (Unknown)
ac97_codec: AC97 Modem codec, id: 0x5349:0x4c21 (Unknown)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 690C
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CREATIVE Model: CD-RW RW1210E Rev: LCS6
Type: CD-ROM ANSI SCSI revision: 02
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Wincan Model: HARD DRIVE DISK Rev: 1.06
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
AC97 modem device found: devnum = 80000E00, devid = 1039/7013
iobase_0=0xd800, iobase_1=0xd400,irq=5
PCTel driver version 0.9.4 [5.05c-4.27.215 (09-14-2001)] (MR) (2002-01-31)
with MANY_PORTS SHARE_IRQ SERIAL_PCI AUDIO_ROUTING[SIS540] enabled.
PCTel driver built on [Linux 2.4.18-6mdk i686 unknown "2.4.18-6mdk
<132114>"] with gcc-2.96.
ttyS15 at 0xd800 (irq = 5) is a PCTel
PCI: Found IRQ 5 for device 00:01.6
PCTel initialization. Country code is 33.
PCTel initialization. Country code is 33.
PCTel initialization. Country code is 33.
PCTel initialization. Country code is 33.
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
PCTel initialization. Country code is 33.
[root@ownerd /root]#
[root@ownerd /root]#
[root@ownerd /root]# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0730
(rev 02)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS
PCI Audio Accelerator (rev 02)
00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev
a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630
GUI Accelerator+3D (rev 31)
[root@ownerd /root]#
[root@ownerd /root]#
[root@ownerd /root]#
[root@ownerd /root]# insmod -f pctel
Using /lib/modules/2.4.18-2cl/misc/pctel.o
insmod: a module named pctel already exists
[root@ownerd /root]# insmod -f ptserial
Using /lib/modules/2.4.18-2cl/misc/ptserial.o
insmod: a module named ptserial already exists
[root@ownerd /root]#
Assinantes em 11/01/2003: 2255
Mensagens recebidas desde 07/01/1999: 196598
Historico e [des]cadastramento: http://linux-br.conectiva.com.br
Assuntos administrativos e problemas com a lista:
mailto:[EMAIL PROTECTED]
