Caros amigos,
Na busca pela solução de um problema que jah postei algumas vezes nesta
lista, venho agora tentar mais um caminho. Coloco abaixo a cópia do DMESG
logo após instalar o Conectiva 6, a respeito da montagem de RAID
PC: AMD 500, 128RAM, 2HDs FUJITSU MPE3084AE 8GB
Na abertura, eu pedi a instalacao do servidor normal.
Escolhi a Istalacao REALMENTE MINIMA
Particionei:
HDA:
0.0 a 64.0 - swap
64.0 a 7999.6 RAID
HDB:
0.0 a 64.0
64.0 a 7999.6 RAID
Criei o RAID de hda2 e hdb2 e fui adiante...ateh o fim da instalacao tudo
correu normalmente....
--dmesg
Linux version 2.2.17-14cl ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 qua nov 1 22:00:28
EST
2000
Detected 475290 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 946.99 BogoMIPS
Memory: 64024k/66556k available (1032k kernel code, 416k reserved, 1012k
data, 72k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfdb81
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPE3084AE, ATA DISK drive
hdb: FUJITSU MPE3084AE, ATA DISK drive
hdd: COMPAQ DVD-ROM GD-2500, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPE3084AE, 8063MB w/512kB Cache, CHS=1027/255/63
hdb: FUJITSU MPE3084AE, 8063MB w/512kB Cache, CHS=1027/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 734.187 MB/sec
p5_mmx : 620.649 MB/sec
8regs : 494.919 MB/sec
32regs : 387.477 MB/sec
using fastest function: pII_mmx (734.187 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2
autodetecting RAID arrays
(read) hda2's sb offset: 8185024 [events: 00000002]
(read) hdb2's sb offset: 8185024 [events: 00000002]
autorun ...
considering hdb2 ...
adding hdb2 ...
adding hda2 ...
created md0
bind<hda2,1>
bind<hdb2,2>
running: <hdb2><hda2>
now!
hdb2's event counter: 00000002
hda2's event counter: 00000002
md: md0: raid array is not clean -- starting background reconstruction
request_module[md-personality-3]: Root fs not mounted
do_md_run() returned -22
unbind<hdb2,1>
export_rdev(hdb2)
unbind<hda2,0>
export_rdev(hda2)
md0 stopped.
... autorun DONE.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
--INIT -
Bem Vindo ao Conectiva Linux
Pressione 'I' para entrar em modo interatovo.
Montando sistema de arquivos proc:
[ OK ]
Configurando parametros do kernel:
[ OK ]
Configurando horario (localtime): Wed Mar 14 11:46:38 EST
[ OK ]
Carregando mapa de teclado padrao (br-abnt2):
[ OK ]
Carregando fonte padrao (lat1u-16):
[ OK ]
Ativando particoes de troca:
[ OK ]
Setando hostname plucky.dtlnet.com.br:
[ OK ]
Initializing USB controller (usb-ohci):
[ OK ]
Montanto sistemas de arquivos USB:
[ OK ]
Verificando sistema de arquivos raiz
fsck.ext2Could this be a zero-lenght partition?
: Attempt to read block from filesystem resulted in short read while
trying
to open /dev/md0 [ FALHOU ]
*** Um erro ocorreu durante a checagem do sistema de arquivos.
*** Entrando em um interpretador de comandos: o sistema será reiniciado
*** quando você sair do interpretador de comandos.
Give root password for maintenance
(or type Control-D for normal startup:
Espero que quem esteja acompanhando este problema possa com isso tentar
esclarece-lo, assim como eu estou tentando...
[]´s
--
Rodrigo R. Morais ([EMAIL PROTECTED])
Linux Registered User # 167159
DTL Solucoes & Tecnologia
http://www.dtlnet.com.br
Assinantes em 15/03/2001: 2212
Mensagens recebidas desde 07/01/1999: 103851
Historico e [des]cadastramento: http://linux-br.conectiva.com.br
Assuntos administrativos e problemas com a lista:
mailto:[EMAIL PROTECTED]
