Hi Linus,
Here are the main 5.4 changes for block for this series. This pull
request contains:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices from
Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling the CAP
register
- reset race with ns scanning fix for fabrics (move fabrics commands to
a dedicated request queue with a different lifetime from the admin
request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
Note that you'll get a simple merge conflict drivers/nvme/host/nvme.h
due to a quirk fix that was merged in mainline after for-5.4/block was
kicked off. It's trivial to resolve, you just have to renumber a few
defines around that conflict.
Please pull!
git://git.kernel.dk/linux-block.git tags/for-5.4/block-2019-09-16
----------------------------------------------------------------
Alessio Balsini (1):
loop: Add LOOP_SET_DIRECT_IO to compat ioctl
Amit (1):
nvmet: fix a wrong error status returned in error log page
André Almeida (6):
docs: block: null_blk: enhance document style
null_blk: fix module name at log message
null_blk: validate the number of devices
null_blk: do not fail the module load with zero devices
null_blk: match the type of parameter nr_devices
null_blk: format pr_* logs with pr_fmt
Andy Shevchenko (1):
md: Convert to use int_pow()
Anton Eidelman (1):
nvme-multipath: fix ana log nsid lookup when nsid is not found
Bart Van Assche (8):
block: Declare several function pointer arguments 'const'
block: Document the bio splitting functions
block: Simplify bvec_split_segs()
block: Simplify blk_bio_segment_split()
block: Improve physical block alignment of split bios
block: Fix spelling in the header above blkg_lookup()
block: Fix a comment in blk_cleanup_queue()
block: Remove blk_mq_register_dev()
Benjamin Herrenschmidt (4):
nvme-pci: Pass the queue to SQ_SIZE/CQ_SIZE macros
nvme-pci: Add support for variable IO SQ element size
nvme-pci: Add support for Apple 2018+ models
nvme-pci: Support shared tags across queues for Apple 2018 controllers
Chaitanya Kulkarni (10):
block: add req op to reset all zones and flag
blk-zoned: implement REQ_OP_ZONE_RESET_ALL
scsi: implement REQ_OP_ZONE_RESET_ALL
null_blk: implement REQ_OP_ZONE_RESET_ALL
null_blk: move duplicate code to callers
null_blk: create a helper for throttling
null_blk: create a helper for badblocks
null_blk: create a helper for mem-backed ops
null_blk: create a helper for zoned devices
null_blk: create a helper for req completion
Christoph Hellwig (3):
block: improve the gap check in __bio_add_pc_page
block: create a bio_try_merge_pc_page helper
block: move same page handling from __bio_add_pc_page to the callers
Colin Ian King (1):
nvme: tcp: remove redundant assignment to variable ret
Damien Le Moal (8):
block: mq-deadline: Fix queue restart handling
block: Cleanup elevator_init_mq() use
block: Change elevator_init_mq() to always succeed
block: Introduce elevator features
block: Improve default elevator selection
block: Delay default elevator initialization
block: Set ELEVATOR_F_ZBD_SEQ_WRITE for nullblk zoned disks
sd: Set ELEVATOR_F_ZBD_SEQ_WRITE for ZBC disks
Dan Carpenter (1):
bcache: Fix an error code in bch_dump_read()
Edmund Nadolski (1):
nvme: include admin_q sync with nvme_sync_queues
Fam Zheng (3):
bfq: Fix the missing barrier in __bfq_entity_update_weight_prio
bfq: Extract bfq_group_set_weight from bfq_io_set_weight_legacy
bfq: Add per-device weight
Guilherme G. Piccoli (1):
md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone
Guoqing Jiang (7):
md: allow last device to be forcibly removed from RAID1/RAID10.
md: don't set In_sync if array is frozen
md: don't call spare_active in md_reap_sync_thread if all member devices
can't work
md/raid5: use bio_end_sector to calculate last_sector
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: remove STRIPE_OPS_REQ_PENDING
raid5: use bio_end_sector in r5_next_bio
Hannes Reinecke (1):
nvme: trace bio completion
Hans Holmberg (4):
lightnvm: remove nvm_submit_io_sync_fn
lightnvm: move metadata mapping to lower level driver
lightnvm: pblk: use kvmalloc for metadata
block: stop exporting bio_map_kern
Hou Tao (4):
raid1: use an int as the return value of raise_barrier()
raid1: factor out a common routine to handle the completion of sync write
block: make rq sector size accessible for block stats
block: also check RQF_STATS in blk_mq_need_time_stamp()
Israel Rukshin (9):
nvme-fabrics: Add type of service (TOS) configuration
nvme-rdma: Add TOS for rdma transport
nvme-tcp: Use struct nvme_ctrl directly
nvme-tcp: Add TOS for tcp transport
nvmet-tcp: Add TOS for tcp transport
nvme-pci: Tidy up nvme_unmap_data
nvme-fc: Use rq_dma_dir macro
nvme-rdma: Use rq_dma_dir macro
nvme: Remove redundant assignment of cq vector
James Smart (2):
nvme-fc: Fail transport errors with NVME_SC_HOST_PATH
nvme: Treat discovery subsystems as unique subsystems
Jann Horn (1):
floppy: fix usercopy direction
Jens Axboe (9):
Merge branch 'md-next' of https://github.com/liu-song-6/linux into
for-5.4/block
lightnvm: remove unused 'geo' variable
null_blk: fix inline misuse
Merge branch 'md-next' of git://git.kernel.org/.../song/md into
for-5.4/block
Merge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-5.4/block
Merge branch 'md-next' of git://git.kernel.org/.../song/md into
for-5.4/block
block: fix elevator_get_by_features()
Merge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-5.4/block
Merge branch 'md-next' of git://git.kernel.org/.../song/md into
for-5.4/block
Johannes Weiner (1):
block: annotate refault stalls from IO submission
Junxiao Bi (1):
block: remove struct request_queue queue_head
Keith Busch (1):
nvme: Assign subsys instance from first ctrl
Kent Overstreet (1):
closures: fix a race on wakeup from closure_sync
Marcos Paulo de Souza (3):
block: elevator.c: Remove now unused elevator= argument
Documenation: switching-sched: Remove notes about elevator argument
Documentation:kernel-per-CPU-kthreads.txt: Remove reference to elevator=
Markus Elfring (1):
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
Mike Christie (5):
nbd: add set cmd timeout helper
nbd: add function to convert blk req op to nbd cmd
nbd: add missing config put
nbd: fix zero cmd timeout handling v2
nbd: fix max number of supported devs
Ming Lei (13):
blk-mq: introduce blk_mq_request_completed()
blk-mq: introduce blk_mq_tagset_wait_completed_request()
nvme: don't abort completed request in nvme_cancel_request
nvme: wait until all completed request's complete fn is called
blk-mq: remove blk_mq_complete_request_sync
blk-mq: add callback of .cleanup_rq
scsi: implement .cleanup_rq callback
blk-mq: balance mapping between present CPUs and queues
block: don't hold q->sysfs_lock in elevator_init_mq
blk-mq: don't hold q->sysfs_lock in blk_mq_map_swqueue
block: add helper for checking if queue is registered
block: split .sysfs_lock into two locks
block: fix race between switching elevator and removing queues
Minwoo Im (7):
nvme: tcp: selects CRYPTO_CRC32C for nvme-tcp
nvme: add Get LBA Status command opcode
nvme: trace: support for Get LBA Status opcode parsed
nvme: trace: parse Get LBA Status command in detail
nvmet: trace: parse Get LBA Status command in detail
lightnvm: introduce pr_fmt for the prefix nvm
lightnvm: print error when target is not found
NeilBrown (4):
md: only call set_in_sync() when it is expected to succeed.
md: don't report active array_state until after revalidate_disk()
completes.
md/raid0: avoid RAID0 data corruption due to layout confusion.
md: add feature flag MD_FEATURE_RAID0_LAYOUT
Nigel Croxon (2):
raid5 improve too many read errors msg by adding limits
raid5: don't increment read_errors on EILSEQ return
Pavel Begunkov (1):
bfq: Fix bfq linkage error
Potnuri Bharat Teja (1):
nvme-tcp: Use protocol specific operations while reading socket
Revanth Rajashekar (3):
block: sed-opal: Add/remove spaces
block: sed-opal: Remove always false conditional statement
block: sed-opal: Removed duplicate OPAL_METHOD_LENGTH definition
Sagi Grimberg (19):
nvme-tcp: cleanup nvme_tcp_recv_pdu
nvme: have nvme_init_identify set ctrl->cap
nvme-pci: set ctrl sqsize to the device q_depth
nvme: move sqsize setting to the core
nvme: don't pass cap to nvme_disable_ctrl
nvme-tcp: support simple polling
nvmet-tcp: fix possible NULL deref
nvmet-tcp: fix possible memory leak
nvme: make fabrics command run on a separate request queue
nvme: fail cancelled commands with NVME_SC_HOST_PATH_ERROR
nvme-tcp: fail command with NVME_SC_HOST_PATH_ERROR send failed
nvme: pass status to nvme_error_status
nvme: make nvme_identify_ns propagate errors back
nvme: make nvme_report_ns_ids propagate error back
nvme: fix ns removal hang when failing to revalidate due to a transient
error
nvme-fabrics: allow discovery subsystems accept a kato
nvme: enable aen regardless of the presence of I/O queues
nvme: add uevent variables for controller devices
nvme: send discovery log page change events to userspace
Shile Zhang (1):
bcache: add cond_resched() in __bch_cache_cmp()
Stanley Chu (2):
block: bypass blk_set_runtime_active for uninitialized q->dev
scsi: core: remove dummy q->dev check
Stephen Rothwell (1):
blkcg: blk-iocost: predeclare used structs
Tejun Heo (27):
writeback, cgroup: Adjust WB_FRN_TIME_CUT_DIV to accelerate foreign inode
switching
writeback, cgroup: inode_switch_wbs() shouldn't give up on
wb_switch_rwsem trylock fail
writeback: Generalize and expose wb_completion
bdi: Add bdi->id
writeback: Separate out wb_get_lookup() from wb_get_create()
writeback, memcg: Implement cgroup_writeback_by_id()
writeback, memcg: Implement foreign dirty flushing
blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()
blkcg: make ->cpd_init_fn() optional
blkcg: separate blkcg_conf_get_disk() out of blkg_conf_prep()
block/rq_qos: add rq_qos_merge()
block/rq_qos: implement rq_qos_ops->queue_depth_changed()
blkcg: s/RQ_QOS_CGROUP/RQ_QOS_LATENCY/
blk-mq: add optional request->alloc_time_ns
blkcg: implement blk-iocost
blkcg: add tools/cgroup/iocost_monitor.py
blkcg: add tools/cgroup/iocost_coef_gen.py
blkcg: fix missing free on error path of blk_iocost_init()
blkcg: add missing NULL check in ioc_cpd_alloc()
writeback: add tracepoints for cgroup foreign writebacks
writeback: don't access page->mapping directly in track_foreign_dirty TP
blk-iocost: Fix incorrect operation order during iocg free
blk-iocost: Account force-charged overage in absolute vtime
blk-iocost: Don't let merges push vtime into the future
iocost_monitor: Always use strings for json values
iocost_monitor: Report more info with higher accuracy
iocost_monitor: Report debt
Tom Wu (1):
nvmet: fix data units read and written counters in SMART log
Xiao Ni (1):
md/raid6: Set R5_ReadError when there is read failure on parity disk
YueHaibing (1):
lightnvm: remove set but not used variables 'data_len' and 'rq_len'
Yufen Yu (3):
md/raid1: end bio when the device faulty
md/raid10: end bio when the device faulty
md/raid1: fail run raid1 array when active disk less than one
Zhou Wang (1):
lib: scatterlist: Fix to support no mapped sg
zhengbin (4):
blk-mq: Fix memory leak in blk_mq_init_allocated_queue error handling
paride/pf: need to set queue to NULL before put_disk
paride/pcd: need to set queue to NULL before put_disk
paride/pcd: need to check if cd->disk is null in pcd_detect
Documentation/admin-guide/cgroup-v2.rst | 97 +
Documentation/admin-guide/kernel-parameters.txt | 6 -
.../admin-guide/kernel-per-CPU-kthreads.rst | 8 +-
Documentation/block/null_blk.rst | 33 +-
Documentation/block/switching-sched.rst | 4 -
block/Kconfig | 13 +
block/Makefile | 1 +
block/bfq-cgroup.c | 156 +-
block/bfq-iosched.h | 3 +
block/bfq-wf2q.c | 2 +
block/bio.c | 60 +-
block/blk-cgroup.c | 73 +-
block/blk-core.c | 37 +-
block/blk-iocost.c | 2457 ++++++++++++++++++++
block/blk-iolatency.c | 8 +-
block/blk-merge.c | 151 +-
block/blk-mq-cpumap.c | 29 +-
block/blk-mq-sysfs.c | 23 +-
block/blk-mq-tag.c | 32 +
block/blk-mq.c | 69 +-
block/blk-pm.c | 12 +-
block/blk-rq-qos.c | 18 +
block/blk-rq-qos.h | 28 +-
block/blk-settings.c | 18 +-
block/blk-sysfs.c | 50 +-
block/blk-throttle.c | 9 +-
block/blk-wbt.c | 20 +-
block/blk-wbt.h | 4 -
block/blk-zoned.c | 39 +
block/blk.h | 4 +-
block/elevator.c | 217 +-
block/genhd.c | 9 +
block/mq-deadline.c | 20 +-
block/opal_proto.h | 5 +-
block/sed-opal.c | 49 +-
drivers/block/floppy.c | 4 +-
drivers/block/loop.c | 1 +
drivers/block/nbd.c | 127 +-
drivers/block/null_blk.h | 18 +-
drivers/block/null_blk_main.c | 183 +-
drivers/block/null_blk_zoned.c | 59 +-
drivers/block/paride/pcd.c | 12 +-
drivers/block/paride/pf.c | 2 +-
drivers/lightnvm/core.c | 97 +-
drivers/lightnvm/pblk-core.c | 116 +-
drivers/lightnvm/pblk-gc.c | 19 +-
drivers/lightnvm/pblk-init.c | 38 +-
drivers/lightnvm/pblk-read.c | 26 +-
drivers/lightnvm/pblk-recovery.c | 42 +-
drivers/lightnvm/pblk-write.c | 20 +-
drivers/lightnvm/pblk.h | 31 +-
drivers/md/bcache/closure.c | 10 +-
drivers/md/bcache/debug.c | 5 +-
drivers/md/bcache/sysfs.c | 1 +
drivers/md/dm-rq.c | 3 +-
drivers/md/md-linear.c | 5 +
drivers/md/md.c | 96 +-
drivers/md/md.h | 20 +
drivers/md/raid0.c | 41 +-
drivers/md/raid0.h | 14 +
drivers/md/raid1.c | 89 +-
drivers/md/raid10.c | 32 +-
drivers/md/raid5.c | 27 +-
drivers/md/raid5.h | 5 +-
drivers/nvme/host/Kconfig | 1 +
drivers/nvme/host/core.c | 201 +-
drivers/nvme/host/fabrics.c | 38 +-
drivers/nvme/host/fabrics.h | 3 +
drivers/nvme/host/fc.c | 73 +-
drivers/nvme/host/lightnvm.c | 45 +-
drivers/nvme/host/multipath.c | 8 +-
drivers/nvme/host/nvme.h | 36 +-
drivers/nvme/host/pci.c | 102 +-
drivers/nvme/host/rdma.c | 61 +-
drivers/nvme/host/tcp.c | 144 +-
drivers/nvme/host/trace.c | 18 +
drivers/nvme/target/admin-cmd.c | 22 +-
drivers/nvme/target/discovery.c | 4 +-
drivers/nvme/target/loop.c | 30 +-
drivers/nvme/target/tcp.c | 24 +-
drivers/nvme/target/trace.c | 18 +
drivers/scsi/scsi_lib.c | 13 +
drivers/scsi/scsi_pm.c | 3 +-
drivers/scsi/sd.c | 5 +-
drivers/scsi/sd.h | 5 +-
drivers/scsi/sd_zbc.c | 12 +-
fs/fs-writeback.c | 174 +-
include/linux/backing-dev-defs.h | 23 +
include/linux/backing-dev.h | 5 +
include/linux/blk-cgroup.h | 6 +-
include/linux/blk-mq.h | 20 +-
include/linux/blk_types.h | 6 +
include/linux/blkdev.h | 73 +-
include/linux/elevator.h | 8 +
include/linux/lightnvm.h | 8 +-
include/linux/memcontrol.h | 39 +
include/linux/nvme.h | 5 +-
include/linux/writeback.h | 2 +
include/trace/events/iocost.h | 178 ++
include/trace/events/writeback.h | 126 +
include/uapi/linux/raid/md_p.h | 2 +
lib/sg_split.c | 12 +-
mm/backing-dev.c | 120 +-
mm/memcontrol.c | 139 ++
mm/page-writeback.c | 4 +
tools/cgroup/iocost_coef_gen.py | 178 ++
tools/cgroup/iocost_monitor.py | 277 +++
107 files changed, 5895 insertions(+), 1283 deletions(-)
create mode 100644 block/blk-iocost.c
create mode 100644 include/trace/events/iocost.h
create mode 100644 tools/cgroup/iocost_coef_gen.py
create mode 100644 tools/cgroup/iocost_monitor.py
--
Jens Axboe
