Eric/Hong, can any of you confirm that this is just a config issue? If so we can still include the fix for 11.11.
Would like to give it a try, but I'm still unable to use my sata disk with my imx53 board (lack of proper power supply). -- You received this bug notification because you are a member of Linaro Release Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/893233 Title: [regression] sata missing on quickstart 11.11 RC1 Status in Linaro Freescale Landing Team Project: Triaged Status in Linaro Ubuntu Evaluation Builds: New Bug description: my sata hard drive when booting on the quickstart board with 11.11 RC, ubuntu-desktop image is not there. linaro@linaro-ubuntu-desktop:~$ fdisk /dev/sda fdisk: unable to open /dev/sda: No such file or directory dmesg: linaro@linaro-ubuntu-desktop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.1.0-1002-linaro-lt-mx5 (buildd@gourd) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #7-Ubuntu PREEMPT Tue Nov 15 13:07:56 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Freescale MX53 LOCO Board, model: Freescale i.MX53 LOCO [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 245760 [ 0.000000] free_area_init_node: node 0, pgdat 808a7bc0, node_mem_map 80e40000 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 242688 [ 0.000000] Kernel command line: console=tty0 console=ttymxc0,115200n8 root=UUID=b10815c6-a3d0-4ef5-a4a8-c9f04b00efb0 rootwait ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 512MB 448MB = 960MB total [ 0.000000] Memory: 957508k/957508k available, 91068k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xf4000000 ( 312 MB) [ 0.000000] lowmem : 0x80000000 - 0xe0000000 (1536 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x807f708c (8125 kB) [ 0.000000] .init : 0x807f8000 - 0x80848000 ( 320 kB) [ 0.000000] .data : 0x80848000 - 0x808aa0b0 ( 393 kB) [ 0.000000] .bss : 0x808aa0d4 - 0x80e3f3b8 (5717 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:400 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] sched_clock: 32 bits at 8MHz, resolution 125ns, wraps every 536870ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.003217] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.090429] pid_max: default: 32768 minimum: 301 [ 0.090843] Security Framework initialized [ 0.091001] AppArmor: AppArmor initialized [ 0.091167] Mount-cache hash table entries: 512 [ 0.095618] CPU: Testing write buffer coherency: ok [ 0.095820] ftrace: allocating 21736 entries in 64 pages [ 0.122385] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.125952] devtmpfs: initialized [ 0.136026] print_constraints: dummy: [ 0.137754] NET: Registered protocol family 16 [ 0.185511] No ATAGs? [ 0.185550] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.186879] IMX usb wakeup probe [ 0.187437] the wakeup pdata is 0x80859ce0 [ 0.187506] IMX usb wakeup probe [ 0.187952] the wakeup pdata is 0x80859dc4 [ 0.254097] bio: create slab <bio-0> at 0 [ 0.260193] SCSI subsystem initialized [ 0.261691] libata version 3.00 loaded. [ 0.265380] usbcore: registered new interface driver usbfs [ 0.266278] usbcore: registered new interface driver hub [ 0.266997] usbcore: registered new device driver usb [ 0.273766] da9052_i2c_is_connected - i2c read success.............. [ 0.275642] print_constraints: VDDA: 3200 mV [ 0.283866] print_constraints: DA9052_LDO1: 600 <--> 1800 mV at 1300 mV normal [ 0.285570] print_constraints: DA9052_LDO2: 600 <--> 1800 mV at 1300 mV normal [ 0.287210] print_constraints: DA9052_LDO3: 1725 <--> 3300 mV at 3300 mV normal [ 0.288742] print_constraints: DA9052_LDO4: 1725 <--> 3300 mV at 2775 mV normal [ 0.290359] print_constraints: DA9052_LDO5: 1200 <--> 3600 mV at 1300 mV normal [ 0.291882] print_constraints: DA9052_LDO6: 1200 <--> 3600 mV at 1300 mV normal [ 0.293976] print_constraints: DA9052_LDO7: 1200 <--> 3600 mV at 2750 mV normal [ 0.295544] print_constraints: DA9052_LDO8: 1200 <--> 3600 mV at 1800 mV normal [ 0.297119] print_constraints: DA9052_LDO9: 1250 <--> 3650 mV at 1500 mV normal [ 0.298715] print_constraints: DA9052_LDO10: 1200 <--> 3600 mV at 1300 mV normal [ 0.300254] print_constraints: DA9052_BUCK_CORE: 500 <--> 2075 mV at 1250 mV normal [ 0.301855] print_constraints: DA9052_BUCK_PRO: 500 <--> 2075 mV at 1350 mV normal [ 0.303736] print_constraints: DA9052_BUCK_MEM: 925 <--> 2500 mV at 1500 mV normal [ 0.305374] print_constraints: DA9052_BUCK_PERI: 925 <--> 2500 mV at 2475 mV normal [ 0.332784] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.337076] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.340370] NetLabel: Initializing [ 0.340416] NetLabel: domain hash size = 128 [ 0.340441] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.340707] NetLabel: unlabeled traffic allowed by default [ 0.340803] Switching to clocksource mxc_timer1 [ 0.342764] Switched to NOHz mode on CPU #0 [ 0.403886] AppArmor: AppArmor Filesystem Enabled [ 0.461798] NET: Registered protocol family 2 [ 0.462349] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.463864] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.466362] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 0.495958] TCP: Hash tables configured (established 131072 bind 65536) [ 0.496109] TCP reno registered [ 0.496163] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.496677] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.497738] NET: Registered protocol family 1 [ 0.499056] RPC: Registered named UNIX socket transport module. [ 0.499107] RPC: Registered udp transport module. [ 0.499136] RPC: Registered tcp transport module. [ 0.499164] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.499876] Trying to unpack rootfs image as initramfs... [ 0.633384] Freeing initrd memory: 1820K [ 0.634810] Bus freq driver module loaded [ 0.635383] sdram autogating driver module loaded [ 0.635777] i.MXC CPU frequency driver [ 0.637408] DVFS driver module loaded [ 0.640313] audit: initializing netlink socket (disabled) [ 0.640613] type=2000 audit(0.600:1): initialized [ 0.720446] Kprobe smoke test started [ 0.736532] Kprobe smoke test passed successfully [ 0.767007] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.769877] Btrfs loaded [ 0.769982] msgmni has been set to 1873 [ 0.774004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.774193] io scheduler noop registered [ 0.774227] io scheduler deadline registered [ 0.774401] io scheduler cfq registered (default) [ 0.777974] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi [ 0.811648] sii902x 1-0039: cound not find device [ 0.814015] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver failed with -22 [ 0.814157] mxc_sdc_fb: probe of mxc_sdc_fb.0 failed with error -22 [ 0.814265] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver vga [ 0.814493] _regulator_get: get() with no identifier [ 0.815635] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9 [ 0.815654] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9 [ 0.850966] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) [ 0.907099] Console: switching to colour frame buffer device 128x48 [ 0.912942] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10 [ 0.912960] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10 [ 0.917407] imx-sdma imx35-sdma: loaded firmware 1.0 [ 0.936867] imx-sdma imx35-sdma: initialized [ 0.938645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.021514] Serial: IMX driver [ 1.022078] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX [ 1.755641] console [ttymxc0] enabled [ 1.800362] brd: module loaded [ 1.821327] loop: module loaded [ 1.829352] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.842108] FEC Ethernet Driver [ 1.863087] fec_enet_mii_bus: probed [ 1.873312] usbcore: registered new interface driver asix [ 1.881893] usbcore: registered new interface driver cdc_ether [ 1.890735] usbcore: registered new interface driver smsc95xx [ 1.899483] usbcore: registered new interface driver net1080 [ 1.908141] usbcore: registered new interface driver cdc_subset [ 1.916991] usbcore: registered new interface driver zaurus [ 1.925106] cdc_ncm: 04-Aug-2011 [ 1.931112] usbcore: registered new interface driver cdc_ncm [ 1.941053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.950050] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 1.950296] initializing FSL-SOC USB Controller [ 2.050921] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller [ 2.062960] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1 [ 2.073471] fsl-ehci fsl-ehci.1: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1 [ 2.073495] fsl-ehci fsl-ehci.1: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park [ 2.073791] fsl-ehci fsl-ehci.1: park 0 [ 2.073816] fsl-ehci fsl-ehci.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.073834] fsl-ehci fsl-ehci.1: ...powerdown ports... [ 2.100899] fsl-ehci fsl-ehci.1: supports USB remote wakeup [ 2.100968] fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200 [ 2.108987] fsl-ehci fsl-ehci.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.120940] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 [ 2.129852] usb usb1: default language 0x0409 [ 2.129943] usb usb1: udev 1, busnum 1, minor = 0 [ 2.129957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.139158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.148715] usb usb1: Product: Freescale On-Chip EHCI Host Controller [ 2.157634] usb usb1: Manufacturer: Linux 3.1.0-1002-linaro-lt-mx5 ehci_hcd [ 2.167018] usb usb1: SerialNumber: fsl-ehci.1 [ 2.176421] usb usb1: usb_probe_device [ 2.176446] usb usb1: configuration #1 chosen from 1 choice [ 2.177009] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.178267] hub 1-0:1.0: usb_probe_interface [ 2.178289] hub 1-0:1.0: usb_probe_interface - got id [ 2.178323] hub 1-0:1.0: USB hub found [ 2.184886] hub 1-0:1.0: 1 port detected [ 2.191224] hub 1-0:1.0: standalone hub [ 2.191239] hub 1-0:1.0: individual port power switching [ 2.191251] hub 1-0:1.0: individual port over-current protection [ 2.191267] hub 1-0:1.0: Single TT [ 2.191280] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.191293] hub 1-0:1.0: power on to power good time: 20ms [ 2.191737] hub 1-0:1.0: local power source is good [ 2.191756] hub 1-0:1.0: enabling power on all ports [ 2.194135] initializing FSL-SOC USB Controller [ 2.291537] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 2.300931] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.311218] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 2 [ 2.321038] fsl-ehci fsl-ehci.0: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1 [ 2.321061] fsl-ehci fsl-ehci.0: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park [ 2.321188] fsl-ehci fsl-ehci.0: park 0 [ 2.321211] fsl-ehci fsl-ehci.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.321228] fsl-ehci fsl-ehci.0: ...powerdown ports... [ 2.350967] fsl-ehci fsl-ehci.0: supports USB remote wakeup [ 2.351030] fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000 [ 2.358914] fsl-ehci fsl-ehci.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.370895] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 [ 2.379073] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 2.379174] fsl-ehci fsl-ehci.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT [ 2.379266] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 2.379709] usb usb2: default language 0x0409 [ 2.379796] usb usb2: udev 1, busnum 2, minor = 128 [ 2.379810] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.388983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.398518] usb usb2: Product: Freescale On-Chip EHCI Host Controller [ 2.407282] usb usb2: Manufacturer: Linux 3.1.0-1002-linaro-lt-mx5 ehci_hcd [ 2.416622] usb usb2: SerialNumber: fsl-ehci.0 [ 2.424759] usb usb2: usb_probe_device [ 2.424782] usb usb2: configuration #1 chosen from 1 choice [ 2.424884] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.425647] hub 2-0:1.0: usb_probe_interface [ 2.425664] hub 2-0:1.0: usb_probe_interface - got id [ 2.425686] hub 2-0:1.0: USB hub found [ 2.431967] hub 2-0:1.0: 1 port detected [ 2.438100] hub 2-0:1.0: standalone hub [ 2.438111] hub 2-0:1.0: individual port power switching [ 2.438123] hub 2-0:1.0: individual port over-current protection [ 2.438138] hub 2-0:1.0: Single TT [ 2.438151] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.438164] hub 2-0:1.0: power on to power good time: 20ms [ 2.438238] hub 2-0:1.0: local power source is good [ 2.438255] hub 2-0:1.0: enabling power on all ports [ 2.440705] usbcore: registered new interface driver cdc_wdm [ 2.448917] Initializing USB Mass Storage driver... [ 2.456857] usbcore: registered new interface driver usb-storage [ 2.465348] USB Mass Storage support registered. [ 2.473586] usbcore: registered new interface driver libusual [ 2.531016] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 2.650972] usb 1-1: new high speed USB device number 2 using fsl-ehci [ 2.711242] fsl-ehci fsl-ehci.1: port 1 high speed [ 2.711270] fsl-ehci fsl-ehci.1: GetStatus port:1 status 18001205 12 ACK POWER sig=se0 LPM PE CONNECT [ 2.801890] usb 1-1: default language 0x0409 [ 2.810136] usb 1-1: udev 2, busnum 1, minor = 1 [ 2.810152] usb 1-1: New USB device found, idVendor=05ac, idProduct=1005 [ 2.819240] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.828720] usb 1-1: Product: Keyboard Hub [ 2.835087] usb 1-1: Manufacturer: Apple Inc. [ 2.841683] usb 1-1: SerialNumber: 000000000000 [ 2.850070] usb 1-1: usb_probe_device [ 2.850096] usb 1-1: configuration #1 chosen from 1 choice [ 2.850558] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2.851468] hub 1-1:1.0: usb_probe_interface [ 2.851488] hub 1-1:1.0: usb_probe_interface - got id [ 2.851523] hub 1-1:1.0: USB hub found [ 2.857882] hub 1-1:1.0: 3 ports detected [ 2.864218] hub 1-1:1.0: compound device; port removable status: RFR [ 2.864234] hub 1-1:1.0: individual port power switching [ 2.864246] hub 1-1:1.0: individual port over-current protection [ 2.864261] hub 1-1:1.0: Single TT [ 2.864274] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.864287] hub 1-1:1.0: Port indicators are supported [ 2.864299] hub 1-1:1.0: power on to power good time: 100ms [ 2.864530] hub 1-1:1.0: hub controller current requirement: 200mA [ 2.864546] hub 1-1:1.0: 100mA bus power budget for each child [ 2.864898] hub 1-1:1.0: enabling power on all ports [ 2.867223] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 2.867252] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 2.867302] fsl-ehci fsl-ehci.1: GetStatus port:1 status 1c00100a 14 ACK POWER sig=se0 PEC CSC [ 2.867380] hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s [ 2.867400] usb 1-1: USB disconnect, device number 2 [ 2.875153] usbcore: registered new interface driver usbtest [ 2.883378] usb 1-1: unregistering device [ 2.883397] usb 1-1: unregistering interface 1-1:1.0 [ 2.888019] usb 1-1: usb_disable_device nuking all URBs [ 2.897888] mxc_rtc mxc_rtc.0: hardware module can't be enabled! [ 2.908374] mxc_rtc: probe of mxc_rtc.0 failed with error -5 [ 2.921197] mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 [ 2.930763] i2c /dev entries driver [ 2.940520] Linux video capture interface: v2.00 [ 2.949965] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0 [ 2.960103] Driver for 1-wire Dallas network protocol. [ 2.971204] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) [ 2.984334] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-de...@redhat.com [ 2.996397] cpuidle: using governor ladder [ 3.003211] cpuidle: using governor menu [ 3.010576] sdhci: Secure Digital Host Controller Interface driver [ 3.019440] sdhci: Copyright(c) Pierre Ossman [ 3.026298] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.034534] fsl-ehci fsl-ehci.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT [ 3.035398] mxc: set GPIO 77 to high trigger [ 3.035593] mmc0: no vmmc regulator found [ 3.043668] Registered led device: mmc0:: [ 3.045103] mmc0: SDHCI controller on sdhci-esdhc-imx53.0 [sdhci-esdhc-imx53.0] using DMA [ 3.056772] mxc: set GPIO 75 to low trigger [ 3.056963] mmc1: no vmmc regulator found [ 3.064606] Registered led device: mmc1:: [ 3.065417] mmc1: SDHCI controller on sdhci-esdhc-imx53.2 [sdhci-esdhc-imx53.2] using DMA [ 3.179300] VPU initialized [ 3.186432] Registered led device: green [ 3.199456] usbcore: registered new interface driver usbhid [ 3.208165] usbhid: USB HID core driver [ 3.221536] mxc_spdif mxc_spdif.0: MXC SPDIF Audio [ 3.237871] sgtl5000 1-000a: Failed to get supply 'VDDD': -19 [ 3.248667] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal [ 3.259087] hub 1-0:1.0: debounce: port 1: total 175ms stable 100ms status 0x101 [ 3.264406] sgtl5000 1-000a: Using internal LDO instead of VDDD [ 3.280576] sgtl5000 1-000a: sgtl5000 revision 17 [ 3.300536] mxc: set GPIO 37 to low trigger [ 3.303748] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.315156] asoc: sgtl5000 <-> imx-ssi.1 mapping ok [ 3.423643] usb 1-1: new high speed USB device number 3 using fsl-ehci [ 3.437415] input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio/sound/card0/input0 [ 3.457931] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok [ 3.469344] ALSA device list: [ 3.475439] #0: sgtl5000-audio [ 3.481460] #1: imx-spdif [ 3.488349] oprofile: using arm/armv7 [ 3.495801] TCP cubic registered [ 3.502274] fsl-ehci fsl-ehci.1: port 1 high speed [ 3.502303] fsl-ehci fsl-ehci.1: GetStatus port:1 status 18001205 12 ACK POWER sig=se0 LPM PE CONNECT [ 3.502390] Initializing XFRM netlink socket [ 3.509989] NET: Registered protocol family 10 [ 3.519732] IPv6 over IPv4 tunneling driver [ 3.528671] NET: Registered protocol family 17 [ 3.536199] NET: Registered protocol family 15 [ 3.543548] mmc0: new SDHC card at address 1234 [ 3.551317] Registering the dns_resolver key type [ 3.559274] VFP support v0.3: [ 3.565542] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 3.575779] implementor 41 architecture 3 part 30 variant c rev 2 [ 3.589602] ThumbEE CPU extension supported. [ 3.597897] mmcblk0: p1 p2 p3 [ 3.604791] usb 1-1: default language 0x0409 [ 3.606014] Registering SWP/SWPB emulation handler [ 3.619511] usb 1-1: udev 3, busnum 1, minor = 2 [ 3.619533] usb 1-1: New USB device found, idVendor=05ac, idProduct=1005 [ 3.737233] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.752124] regulator_init_complete: DA9052_BUCK_PERI: incomplete constraints, leaving on [ 3.763331] usb 1-1: Product: Keyboard Hub [ 3.770002] usb 1-1: Manufacturer: Apple Inc. [ 3.776958] regulator_init_complete: DA9052_BUCK_MEM: incomplete constraints, leaving on [ 3.787733] usb 1-1: SerialNumber: 000000000000 [ 3.794890] regulator_init_complete: DA9052_BUCK_PRO: incomplete constraints, leaving on [ 3.806894] usb 1-1: usb_probe_device [ 3.806920] usb 1-1: configuration #1 chosen from 1 choice [ 3.807180] regulator_init_complete: DA9052_BUCK_CORE: incomplete constraints, leaving on [ 3.818379] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 3.818936] regulator_init_complete: DA9052_LDO10: incomplete constraints, leaving on [ 3.829976] hub 1-1:1.0: usb_probe_interface [ 3.829996] hub 1-1:1.0: usb_probe_interface - got id [ 3.830021] hub 1-1:1.0: USB hub found [ 3.836607] regulator_init_complete: DA9052_LDO9: incomplete constraints, leaving on [ 3.847118] hub 1-1:1.0: 3 ports detected [ 3.853799] regulator_init_complete: DA9052_LDO8: incomplete constraints, leaving on [ 3.864232] hub 1-1:1.0: compound device; port removable status: RFR [ 3.864247] hub 1-1:1.0: individual port power switching [ 3.864259] hub 1-1:1.0: individual port over-current protection [ 3.864274] hub 1-1:1.0: Single TT [ 3.864287] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.864300] hub 1-1:1.0: Port indicators are supported [ 3.864312] hub 1-1:1.0: power on to power good time: 100ms [ 3.864386] regulator_init_complete: DA9052_LDO7: incomplete constraints, leaving on [ 3.874840] hub 1-1:1.0: hub controller current requirement: 200mA [ 3.874856] hub 1-1:1.0: 100mA bus power budget for each child [ 3.874927] regulator_init_complete: DA9052_LDO6: incomplete constraints, leaving on [ 3.885328] hub 1-1:1.0: enabling power on all ports [ 3.885408] regulator_init_complete: DA9052_LDO5: incomplete constraints, leaving on [ 3.895774] regulator_init_complete: DA9052_LDO4: incomplete constraints, leaving on [ 3.910621] regulator_init_complete: DA9052_LDO3: incomplete constraints, leaving on [ 3.921805] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 3.921998] regulator_init_complete: DA9052_LDO2: incomplete constraints, leaving on [ 3.932246] regulator_init_complete: DA9052_LDO1: incomplete constraints, leaving on [ 4.042655] hub 1-1:1.0: port 2: status 0101 change 0001 [ 4.043689] mxc: set GPIO 8 to low trigger [ 4.044063] mxc: set GPIO 46 to low trigger [ 4.044338] mxc: set GPIO 47 to low trigger [ 4.045495] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 4.058040] mxc_rtc mxc_rtc.0: setting system clock to 2011-11-21 11:06:48 UTC (1321873608) [ 4.072784] Freeing init memory: 320K [ 4.141214] usb 1-1: link qh256-0001/d9744600 start 1 [1/0 us] [ 4.141396] hub 1-1:1.0: state 7 ports 3 chg 0004 evt 0000 [ 4.141812] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 4.271363] usb 1-1.2: new low speed USB device number 4 using fsl-ehci [ 4.382193] udevd[712]: starting version 173 [ 4.405327] usb 1-1.2: skipped 1 descriptor after interface [ 4.405358] usb 1-1.2: skipped 1 descriptor after interface [ 4.405915] usb 1-1.2: default language 0x0409 [ 4.410215] usb 1-1.2: udev 4, busnum 1, minor = 3 [ 4.410238] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=021d [ 4.453050] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.489849] usb 1-1.2: Product: Apple Keyboard [ 4.701044] usb 1-1.2: Manufacturer: Apple Inc. [ 4.759172] usb 1-1.2: usb_probe_device [ 4.759200] usb 1-1.2: configuration #1 chosen from 1 choice [ 4.802846] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 4.803495] usbtest 1-1.2:1.0: usb_probe_interface [ 4.803514] usbtest 1-1.2:1.0: usb_probe_interface - got id [ 4.803680] usbhid 1-1.2:1.0: usb_probe_interface [ 4.803696] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 4.855836] input: Apple Inc. Apple Keyboard as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 [ 5.238894] usb 1-1.2: link qh8-0e01/d8acf400 start 2 [1/2 us] [ 5.274150] apple 0003:05AC:021D.0001: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-fsl-ehci.1-1.2/input0 [ 5.428638] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) [ 5.429502] usbtest 1-1.2:1.1: usb_probe_interface [ 5.429523] usbtest 1-1.2:1.1: usb_probe_interface - got id [ 5.429639] usbhid 1-1.2:1.1: usb_probe_interface [ 5.429653] usbhid 1-1.2:1.1: usb_probe_interface - got id [ 5.440529] input: Apple Inc. Apple Keyboard as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input3 [ 5.477922] usb 1-1.2: link qh8-0e01/d8acfc80 start 3 [1/2 us] [ 5.480638] apple 0003:05AC:021D.0002: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-fsl-ehci.1-1.2/input1 [ 5.548852] hub 1-1:1.0: 280mA power budget left [ 5.548884] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0004 [ 6.096051] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 7.146264] init: ureadahead main process (837) terminated with status 5 [ 8.073849] udevd[876]: starting version 173 [ 9.267894] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 10.816253] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 10.816773] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 10.972316] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 11.051412] usb 1-1.3: new low speed USB device number 5 using fsl-ehci [ 11.164817] usb 1-1.3: skipped 1 descriptor after interface [ 11.165722] usb 1-1.3: default language 0x0409 [ 11.168426] usb 1-1.3: udev 5, busnum 1, minor = 4 [ 11.168448] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c00e [ 11.168462] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.168477] usb 1-1.3: Product: USB-PS/2 Optical Mouse [ 11.168489] usb 1-1.3: Manufacturer: Logitech [ 11.170335] usb 1-1.3: usb_probe_device [ 11.170366] usb 1-1.3: configuration #1 chosen from 1 choice [ 11.171252] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 11.172104] usbtest 1-1.3:1.0: usb_probe_interface [ 11.172125] usbtest 1-1.3:1.0: usb_probe_interface - got id [ 11.172242] usbhid 1-1.3:1.0: usb_probe_interface [ 11.172256] usbhid 1-1.3:1.0: usb_probe_interface - got id [ 11.207554] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input4 [ 11.208600] generic-usb 0003:046D:C00E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.1-1.3/input0 [ 11.229990] hub 1-1:1.0: 182mA power budget left [ 11.230021] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 11.604664] input: mma8450 as /devices/virtual/input/input5 [ 11.861784] Registered led device: LED_GPIO14 [ 11.892239] Registered led device: LED_GPIO15 [ 11.965698] input: da9052-onkey as /devices/platform/imx-i2c.0/i2c-0/0-0048/da9052-onkey/input/input6 [ 12.092346] da9052-rtc da9052-rtc: rtc core: registered da9052-rtc as rtc1 [ 12.093347] DA9052 SM probe - 0 [ 18.640242] mousedev: PS/2 mouse device common for all mice [ 19.530841] init: failsafe main process (1216) killed by TERM signal [ 21.628644] init: apport pre-start process (1308) terminated with status 1 [ 21.814498] init: alsa-restore main process (1313) terminated with status 99 [ 21.927467] init: apport post-stop process (1334) terminated with status 1 [ 23.645980] eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=1:00, irq=-1) [ 23.648797] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.887901] Bluetooth: Core ver 2.16 [ 24.894075] NET: Registered protocol family 31 [ 24.894101] Bluetooth: HCI device and connection manager initialized [ 24.894635] Bluetooth: HCI socket layer initialized [ 25.448841] usb 1-1.3: link qh8-0e01/d82ad900 start 4 [1/2 us] [ 25.642028] PHY: 1:00 - Link is Up - 100/Full [ 25.643196] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.140212] init: plymouth-stop pre-start process (1509) terminated with status 1 [ 26.383510] init: tty1 main process (1510) killed by TERM signal [ 26.981572] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9 [ 26.981597] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9 [ 36.480961] eth0: no IPv6 routers present [ 65.285892] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,commit=0 [ 69.631261] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 2048.305592] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9 [ 2048.305612] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9 [ 3469.400254] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9 [ 3469.400431] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9 To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-freescale/+bug/893233/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~linaro-release Post to : linaro-release@lists.launchpad.net Unsubscribe : https://launchpad.net/~linaro-release More help : https://help.launchpad.net/ListHelp
