Remove bashisms such as bash arrays and local keywords in all function
scripts. Replace bash arrays with POSIX-compliant ones to store a series
of values. Some variables are renamed to be clear of what values are
assigned to them. Formatting has been changed to make the scripts
more readable.
However, suspend_functions.sh has not been fully tested since
the suspend test module is currently disabled by default in PM-QA.
Signed-off-by: Lisa Nguyen <lisa.ngu...@linaro.org>
---
include/functions.sh | 248 ++++++++++++++++++++----------------------
include/suspend_functions.sh | 4 +-
include/thermal_functions.sh | 219 +++++++++++++++++++------------------
3 files changed, 233 insertions(+), 238 deletions(-)
diff --git a/include/functions.sh b/include/functions.sh
index ebe96ad..1de7ab3 100644
--- a/include/functions.sh
+++ b/include/functions.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
#
# PM-QA validation test suite for the power management on Linux
#
@@ -23,13 +23,12 @@
# - initial API and implementation
#
-source ../Switches.sh
+. ../Switches.sh
CPU_PATH="/sys/devices/system/cpu"
TEST_NAME=$(basename ${0%.sh})
PREFIX=$TEST_NAME
INC=0
-CPU=
cpus=$(ls $CPU_PATH | grep "cpu[0-9].*")
pass_count=0
fail_count=0
@@ -50,9 +49,9 @@ test_status_show() {
fi
echo " "
- if [[ "$test_script_status" == "fail" ]]; then
+ if [ "$test_script_status" = "fail" ]; then
echo "$TEST_NAME: fail"
- elif [[ "$test_script_status" == "skip" ]]; then
+ elif [ "$test_script_status" = "skip" ]; then
echo "$TEST_NAME: skip"
else
echo "$TEST_NAME: pass"
@@ -77,11 +76,11 @@ log_begin() {
}
log_end() {
- printf "$*\n"
+ echo "$*"
- if [[ "$*" == "Err" ]]; then
+ if [ "$*" = "Err" ]; then
fail_count=$((fail_count + 1))
- elif [[ "$*" == "skip" ]]; then
+ elif [ "$*" = "skip" ]; then
skip_count=$((skip_count + 1))
else
pass_count=$((pass_count + 1))
@@ -94,114 +93,107 @@ log_skip() {
}
for_each_cpu() {
-
- local func=$1
+ cpu_func=$1
shift 1
for cpu in $cpus; do
- INC=0
- CPU=/$cpu
- $func $cpu $@
+ INC=0
+ CPU=/$cpu
+ $cpu_func $cpu $@
done
return 0
}
for_each_governor() {
-
- local cpu=$1
- local func=$2
- local dirpath=$CPU_PATH/$cpu/cpufreq
- local governors=$(cat $dirpath/scaling_available_governors)
+ cpu=$1
+ gov_func=$2
+ cpufreq_dirpath=$CPU_PATH/$cpu/cpufreq
+ governors=$(cat $cpufreq_dirpath/scaling_available_governors)
shift 2
for governor in $governors; do
- $func $cpu $governor $@
+ $gov_func $cpu $governor $@
done
return 0
}
for_each_frequency() {
-
- local cpu=$1
- local func=$2
- local dirpath=$CPU_PATH/$cpu/cpufreq
- local frequencies=$(cat $dirpath/scaling_available_frequencies)
+ cpu=$1
+ freq_func=$2
+ cpufreq_dirpath=$CPU_PATH/$cpu/cpufreq
+ frequencies=$(cat $cpufreq_dirpath/scaling_available_frequencies)
shift 2
for frequency in $frequencies; do
- $func $cpu $frequency $@
+ $freq_func $cpu $frequency $@
done
return 0
}
set_governor() {
+ cpu=$1
+ scaling_gov_dirpath=$CPU_PATH/$cpu/cpufreq/scaling_governor
+ newgov=$2
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq/scaling_governor
- local newgov=$2
-
- echo $newgov > $dirpath
+ echo $newgov > $scaling_gov_dirpath
}
get_governor() {
+ cpu=$1
+ scaling_gov_dirpath=$CPU_PATH/$cpu/cpufreq/scaling_governor
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq/scaling_governor
-
- cat $dirpath
+ cat $scaling_gov_dirpath
}
wait_latency() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq
- local latency=
- local nrfreq=
- local sampling_rate=
- local sleep_time=
- local gov=$(cat $dirpath/scaling_governor)
+ cpu=$1
+ cpufreq_dirpath=$CPU_PATH/$cpu/cpufreq
+ scaling_gov=$(cat $cpufreq_dirpath/scaling_governor)
+ nanosleep="../utils/nanosleep"
# consider per-policy governor case
- if [ -e $CPU_PATH/$cpu/cpufreq/$gov ]; then
- sampling_rate=$(cat $CPU_PATH/$cpu/cpufreq/$gov/sampling_rate)
+ if [ -e $cpufreq_dirpath/$scaling_gov ]; then
+ sampling_rate=$(cat $cpufreq_dirpath/$scaling_gov/sampling_rate)
+ elif [ -e $CPU_PATH/cpufreq/$scaling_gov/sampling_rate ]; then
+ sampling_rate=0
else
- sampling_rate=$(cat $CPU_PATH/cpufreq/$gov/sampling_rate)
+ sampling_rate=$(cat $CPU_PATH/cpufreq/$scaling_gov/sampling_rate)
fi
+
sampling_rate=$((sampling_rate * 1000)) # unit nsec
- latency=$(cat $dirpath/cpuinfo_transition_latency)
+ latency=$(cat $cpufreq_dirpath/cpuinfo_transition_latency)
if [ $? -ne 0 ]; then
- return 1
+ return 1
fi
- nrfreq=$(cat $dirpath/scaling_available_frequencies | wc -w)
+ nrfreq=$(cat $cpufreq_dirpath/scaling_available_frequencies | wc -w)
if [ $? -ne 0 ]; then
- return 1
+ return 1
fi
nrfreq=$((nrfreq + 1))
-
sleep_time=$(($latency + $sampling_rate))
-
- ../utils/nanosleep $(($nrfreq * $sleep_time))
+ $nanosleep $(($nrfreq * $sleep_time))
}
frequnit() {
- local freq=$1
- local ghz=$(echo "scale=1;($freq / 1000000)" | bc -l)
- local mhz=$(echo "scale=1;($freq / 1000)" | bc -l)
+ freq=$1
+ ghz=$(echo "scale=1;($freq / 1000000)" | bc -l)
+ mhz=$(echo "scale=1;($freq / 1000)" | bc -l)
res=$(echo "($ghz > 1.0)" | bc -l)
if [ "$res" = "1" ]; then
- echo $ghz GHz
+ echo $ghz GHz
return 0
fi
res=$(echo "($mhz > 1.0)" | bc -l)
if [ "$res" = "1" ];then
- echo $mhz MHz
+ echo $mhz MHz
return 0
fi
@@ -209,75 +201,73 @@ frequnit() {
}
set_frequency() {
-
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq
- local newfreq=$2
- local setfreqpath=$dirpath/scaling_setspeed
+ cpu=$1
+ cpufreq_dirpath=$CPU_PATH/$cpu/cpufreq
+ newfreq=$2
+ setfreqpath=$cpufreq_dirpath/scaling_setspeed
echo $newfreq > $setfreqpath
wait_latency $cpu
}
get_frequency() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq/scaling_cur_freq
- cat $dirpath
+ cpu=$1
+ scaling_cur_freq=$CPU_PATH/$cpu/cpufreq/scaling_cur_freq
+ cat $scaling_cur_freq
}
get_max_frequency() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq/scaling_max_freq
- cat $dirpath
+ cpu=$1
+ scaling_max_freq=$CPU_PATH/$cpu/cpufreq/scaling_max_freq
+ cat $scaling_max_freq
}
get_min_frequency() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu/cpufreq/scaling_min_freq
- cat $dirpath
+ cpu=$1
+ scaling_min_freq=$CPU_PATH/$cpu/cpufreq/scaling_min_freq
+ cat $scaling_min_freq
}
set_online() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu
+ cpu=$1
+ current_cpu=$CPU_PATH/$cpu
if [ "$cpu" = "cpu0" ]; then
- return 0
+ return 0
fi
- echo 1 > $dirpath/online
+ echo 1 > $current_cpu/online
}
set_offline() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu
+ cpu=$1
+ current_cpu=$CPU_PATH/$cpu
if [ "$cpu" = "cpu0" ]; then
- return 0
+ return 0
fi
- echo 0 > $dirpath/online
+ echo 0 > $current_cpu/online
}
get_online() {
- local cpu=$1
- local dirpath=$CPU_PATH/$cpu
+ cpu=$1
+ current_cpu=$CPU_PATH/$cpu
- cat $dirpath/online
+ cat $current_cpu/online
}
check() {
-
- local descr=$1
- local func=$2
+ description=$1
+ function=$2
shift 2;
- log_begin "checking $descr"
+ log_begin "checking $description"
- $func $@
+ $function $@
if [ $? -ne 0 ]; then
- log_end "Err"
- return 1
+ log_end "Err"
+ return 1
fi
log_end "Ok"
@@ -286,108 +276,100 @@ check() {
}
check_file() {
- local file=$1
- local dir=$2
+ file=$1
+ dir=$2
check "'$file' exists in '$dir'" "test -f" $dir/$file
}
check_cpufreq_files() {
-
- local dirpath=$CPU_PATH/$1/cpufreq
+ dirpath=$CPU_PATH/$1/cpufreq
shift 1
for i in $@; do
- check_file $i $dirpath || return 1
+ check_file $i $dirpath || return 1
done
return 0
}
check_sched_mc_files() {
-
- local dirpath=$CPU_PATH
-
for i in $@; do
- check_file $i $dirpath || return 1
+ check_file $i $CPU_PATH || return 1
done
return 0
}
check_topology_files() {
-
- local dirpath=$CPU_PATH/$1/topology
+ dirpath=$CPU_PATH/$1/topology
shift 1
for i in $@; do
- check_file $i $dirpath || return 1
+ check_file $i $dirpath || return 1
done
return 0
}
check_cpuhotplug_files() {
-
- local dirpath=$CPU_PATH/$1
+ dirpath=$CPU_PATH/$1
shift 1
for i in $@; do
- if [ `echo $dirpath | grep -c "cpu0"` -eq 1 ]; then
- if [ $hotplug_allow_cpu0 -eq 0 ]; then
- continue
- fi
- fi
+ if [ `echo $dirpath | grep -c "cpu0"` -eq 1 ]; then
+ if [ $hotplug_allow_cpu0 -eq 0 ]; then
+ continue
+ fi
+ fi
- check_file $i $dirpath || return 1
+ check_file $i $dirpath || return 1
done
return 0
}
save_governors() {
-
- governors_backup=
- local index=0
+ gov_array_name="governors_backup"
+ index=0
for cpu in $cpus; do
- governors_backup[$index]=$(cat $CPU_PATH/$cpu/cpufreq/scaling_governor)
- index=$((index + 1))
+ scaling_gov=$(cat $CPU_PATH/$cpu/cpufreq/scaling_governor)
+ eval $gov_array_name$index=$scaling_gov
+ eval export $gov_array_name$index
+ index=$((index + 1))
done
}
restore_governors() {
-
- local index=0
- local oldgov=
+ index=0
for cpu in $cpus; do
- oldgov=${governors_backup[$index]}
- echo $oldgov > $CPU_PATH/$cpu/cpufreq/scaling_governor
- index=$((index + 1))
+ oldgov=$(eval echo \$$gov_array_name$index)
+ echo $oldgov > $CPU_PATH/$cpu/cpufreq/scaling_governor
+ index=$((index + 1))
done
}
save_frequencies() {
-
- frequencies_backup=
- local index=0
+ freq_array_name="frequencies_backup"
+ index=0
for cpu in $cpus; do
- frequencies_backup[$index]=$(cat
$CPU_PATH/$cpu/cpufreq/scaling_cur_freq)
- index=$((index + 1))
+ freq=$(cat $CPU_PATH/$cpu/cpufreq/scaling_cur_freq)
+ eval $freq_array_name$index=$freq
+ eval export $freq_array_name$index
+ index=$((index + 1))
done
}
restore_frequencies() {
-
- local index=0
- local oldfreq=
+ index=0
for cpu in $cpus; do
- oldfreq=${frequencies_backup[$index]}
- echo $oldfreq > $CPU_PATH/$cpu/cpufreq/scaling_setspeed
- index=$((index + 1))
+ oldfreq=$(eval echo \$$freq_array_name$index)
+ echo $oldfreq > $CPU_PATH/$cpu/cpufreq/scaling_setspeed
+ index=$((index + 1))
done
}
@@ -421,11 +403,11 @@ is_root() {
}
is_cpu0_hotplug_allowed() {
- local status=$1
+ status=$1
if [ $status -eq 1 ]; then
- return 0
+ return 0
else
- return 1
+ return 1
fi
}
diff --git a/include/suspend_functions.sh b/include/suspend_functions.sh
index 3be29f5..d5c8e2b 100644
--- a/include/suspend_functions.sh
+++ b/include/suspend_functions.sh
@@ -113,6 +113,7 @@ suspend_system ()
# Wait on the machine coming back up -- pulling the dmesg over.
echo "v---" >>"$LOGFILE"
retry=30
+
while [ "$retry" -gt 0 ]; do
let "retry=$retry-1"
@@ -131,6 +132,7 @@ suspend_system ()
fi
sleep 1
done
+
echo "^---" >>"$LOGFILE"
rm -f "$LOGFILE.dmesg"*
if [ "$retry" -eq 0 ]; then
@@ -242,6 +244,7 @@ ac_check()
ECHO "*** WARNING: AC power not in expected state" \
"($ac_becomes) after test"
fi
+
ac_is="$ac_becomes"
}
@@ -293,4 +296,3 @@ if [ "$pm_trace" -eq 1 ]; then
else
disable_trace
fi
-
diff --git a/include/thermal_functions.sh b/include/thermal_functions.sh
index bfc6620..b66aeef 100644
--- a/include/thermal_functions.sh
+++ b/include/thermal_functions.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
#
# PM-QA validation test suite for the power management on Linux
#
@@ -26,20 +26,22 @@
THERMAL_PATH="/sys/devices/virtual/thermal"
MAX_ZONE=0-12
MAX_CDEV=0-50
-ALL_ZONE=
-ALL_CDEV=
+thermal_zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
+scale_freq_array="scale_freq"
+mode_list_array="mode_list"
+thermal_gov_array="thermal_gov_backup"
check_valid_temp() {
- local file=$1
- local zone_name=$2
- local dir=$THERMAL_PATH/$2
+ file=$1
+ zone_name=$2
+ dir=$THERMAL_PATH/$2
- local temp_file=$dir/$1
- local func=cat
+ temp_file=$dir/$1
+ func=cat
shift 2;
- local temp_val=$($func $temp_file)
- local descr="'$zone_name'/'$file' ='$temp_val'"
+ temp_val=$($func $temp_file)
+ descr="'$zone_name'/'$file' ='$temp_val'"
log_begin "checking $descr"
if [ $temp_val -gt 0 ]; then
@@ -53,74 +55,72 @@ check_valid_temp() {
}
for_each_thermal_zone() {
-
- local func=$1
+ thermal_zone_func=$1
shift 1
- zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
-
- ALL_ZONE=$zone
- for zone in $zones; do
- INC=0
- $func $zone $@
+ for zone in $thermal_zones; do
+ INC=0
+ $thermal_zone_func $zone $@
done
return 0
}
get_total_trip_point_of_zone() {
-
- local zone_path=$THERMAL_PATH/$1
- local count=0
+ zone_path=$THERMAL_PATH/$1
+ count=0
shift 1
+
trips=$(ls $zone_path | grep "trip_point_['$MAX_ZONE']_temp")
for trip in $trips; do
- count=$((count + 1))
+ count=$((count + 1))
done
+
return $count
}
for_each_trip_point_of_zone() {
-
- local zone_path=$THERMAL_PATH/$1
- local count=0
- local func=$2
- local zone_name=$1
+ zone_path=$THERMAL_PATH/$1
+ count=0
+ trip_pt_func=$2
+ zone_name=$1
shift 2
+
trips=$(ls $zone_path | grep "trip_point_['$MAX_ZONE']_temp")
for trip in $trips; do
- $func $zone_name $count
- count=$((count + 1))
+ $trip_pt_func $zone_name $count
+ count=$((count + 1))
done
+
return 0
}
for_each_binding_of_zone() {
-
- local zone_path=$THERMAL_PATH/$1
- local count=0
- local func=$2
- local zone_name=$1
+ zone_path=$THERMAL_PATH/$1
+ count=0
+ binding_zone_func=$2
+ zone_name=$1
shift 2
+
trips=$(ls $zone_path | grep "cdev['$MAX_CDEV']_trip_point")
for trip in $trips; do
- $func $zone_name $count
- count=$((count + 1))
+ $binding_zone_func $zone_name $count
+ count=$((count + 1))
done
return 0
-
}
check_valid_binding() {
- local trip_point=$1
- local zone_name=$2
- local dirpath=$THERMAL_PATH/$2
- local temp_file=$2/$1
- local trip_point_val=$(cat $dirpath/$trip_point)
+ trip_point=$1
+ zone_name=$2
+ dirpath=$THERMAL_PATH/$2
+ temp_file=$2/$1
+ trip_point_val=$(cat $dirpath/$trip_point)
+
get_total_trip_point_of_zone $zone_name
- local trip_point_max=$?
- local descr="'$temp_file' valid binding"
+ trip_point_max=$?
+ descr="'$temp_file' valid binding"
shift 2
log_begin "checking $descr"
@@ -134,10 +134,10 @@ check_valid_binding() {
}
validate_trip_bindings() {
- local zone_name=$1
- local bind_no=$2
- local dirpath=$THERMAL_PATH/$1
- local trip_point=cdev$2_trip_point
+ zone_name=$1
+ bind_no=$2
+ dirpath=$THERMAL_PATH/$1
+ trip_point=cdev$2_trip_point
shift 2
check_file $trip_point $dirpath || return 1
@@ -145,11 +145,11 @@ validate_trip_bindings() {
}
validate_trip_level() {
- local zone_name=$1
- local trip_no=$2
- local dirpath=$THERMAL_PATH/$1
- local trip_temp=trip_point_$2_temp
- local trip_type=trip_point_$2_type
+ zone_name=$1
+ trip_no=$2
+ dirpath=$THERMAL_PATH/$1
+ trip_temp=trip_point_$2_temp
+ trip_type=trip_point_$2_type
shift 2
check_file $trip_temp $dirpath || return 1
@@ -158,88 +158,97 @@ validate_trip_level() {
}
for_each_cooling_device() {
-
- local func=$1
+ cooling_device_func=$1
shift 1
- devices=$(ls $THERMAL_PATH | grep "cooling_device['$MAX_CDEV']")
- if [ "$devices" == "" ]; then
- log_skip "no cooling devices"
- return 0
+ cooling_devices=$(ls $THERMAL_PATH | grep "cooling_device['$MAX_CDEV']")
+ if [ "$cooling_devices" = "" ]; then
+ log_skip "no cooling devices"
+ return 0
fi
- ALL_DEVICE=$devices
- for device in $devices; do
- INC=0
- $func $device $@
+ for device in $cooling_devices; do
+ INC=0
+ $cooling_device_func $device $@
done
return 0
}
-check_scaling_freq() {
- local before_freq_list=$1
- local after_freq_list=$2
+# double check the values of this function
+check_scaling_freq() {
+ before_freq_list=$1
+ after_freq_list=$2
shift 2
- local index=0
+ index=0
- local flag=0
+ flag=0
for cpu in $cpus; do
- if [ ${before_freq_list[$index]} -ne ${after_freq_list[$index]} ] ; then
- flag=1
- fi
+ eval export $before_freq_list$index
+ eval export $after_freq_list$index
+
+ bfreq=$(eval echo \$$before_freq_list$index)
+ afreq=$(eval echo \$$after_freq_list$index)
+
+ if [ "$bfreq" -ne "$afreq" ]; then
+ flag=1
+ fi
+
index=$((index + 1))
done
+
return $flag
}
store_scaling_maxfreq() {
- scale_freq=
- local index=0
+ index=0
for cpu in $cpus; do
- scale_freq[$index]=$(cat $CPU_PATH/$cpu/cpufreq/scaling_max_freq)
+ scaling_max_freq=$(cat $CPU_PATH/$cpu/cpufreq/scaling_max_freq)
+ eval $scaling_freq_array$index=$scaling_max_freq
+ eval export $scaling_freq_array$index
index=$((index + 1))
done
+
return 0
}
get_trip_id() {
-
- local trip_name=$1
+ trip_name=$1
shift 1
- local id1=$(echo $trip_name|cut -c12)
- local id2=$(echo $trip_name|cut -c13)
+ id1=$(echo $trip_name|cut -c12)
+ id2=$(echo $trip_name|cut -c13)
if [ $id2 != "_" ]; then
- id1=$(($id2 + 10*$id1))
+ id1=$(($id2 + 10*$id1))
fi
+
return $id1
}
disable_all_thermal_zones() {
+ index=0
- mode_list=
- local index=0
-
- local th_zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
- for zone in $th_zones; do
- mode_list[$index]=$(cat $THERMAL_PATH/$zone/mode)
+ for zone in $thermal_zones; do
+ mode=$(cat $THERMAL_PATH/$zone/mode)
+ eval $mode_list_array$index=$mode
+ eval export $mode_list_array$index
index=$((index + 1))
- echo -n "disabled" > $THERMAL_PATH/$zone/mode
+ echo -n "disabled" > $THERMAL_PATH/$zone/mode
done
+
return 0
}
enable_all_thermal_zones() {
+ index=0
- local index=0
-
- local th_zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
- for zone in $th_zones; do
- echo ${mode_list[$index]} > $THERMAL_PATH/$zone/mode
+ for zone in $thermal_zones; do
+ mode=$(eval echo \$$mode_list_array$index)
+ echo $mode > $THERMAL_PATH/$zone/mode
index=$((index + 1))
done
+
return 0
}
@@ -255,6 +264,7 @@ start_glmark2() {
if [ -x $GPU_HEAT_BIN ]; then
$GPU_HEAT_BIN &
gpu_pid=$(pidof $GPU_HEAT_BIN)
+
# Starting X application from serial console needs this
if [ -z "$gpu_pid" ]; then
cp /etc/lightdm/lightdm.conf /etc/lightdm/lightdm.conf.bk
@@ -266,6 +276,7 @@ start_glmark2() {
$GPU_HEAT_BIN &
gpu_pid=$(pidof $GPU_HEAT_BIN)
fi
+
test -z "$gpu_pid" && cpu_pid=0
echo "start gpu heat binary $gpu_pid"
else
@@ -280,33 +291,33 @@ kill_glmark2() {
fi
if [ "$gpu_pid" -ne 0 ]; then
- kill -9 $gpu_pid
+ kill -9 $gpu_pid
fi
}
set_thermal_governors() {
+ gov=$1
+ index=0
- local gov=$1
- local index=0
- thermal_governor_backup[MAX_ZONE]=
-
- local th_zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
- for zone in $th_zones; do
- thermal_governor_backup[$index]=$(cat $THERMAL_PATH/$zone/policy)
+ for zone in $thermal_zones; do
+ policy=$(cat $THERMAL_PATH/$zone/policy)
+ eval $thermal_gov_array$index=$policy
+ eval export $thermal_gov_array$index
index=$((index + 1))
echo $gov > $THERMAL_PATH/$zone/policy
done
+
return 0
}
restore_thermal_governors() {
+ index=0
- local index=0
-
- local th_zones=$(ls $THERMAL_PATH | grep "thermal_zone['$MAX_ZONE']")
- for zone in $th_zones; do
- echo ${thermal_governor_backup[$index]} > $THERMAL_PATH/$zone/policy
+ for zone in $thermal_zones; do
+ policy=$(eval echo \$$thermal_gov_array$index)
+ echo $policy > $THERMAL_PATH/$zone/policy
index=$((index + 1))
done
+
return 0
}
--
1.7.9.5
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
