Hi all, Is it a valid or supported use case to build LSK 3.14 kernel with android-toolchain? I can build a LSK 3.14 kernel with Linux toolchain gcc-linaro-arm-none-eabi-4.9-2014.09, which boots fine on my board. When I build the same kernel with android-toolchain-eabi-4.9-2014.09-x86, the kernel can be built out successfully, but it fails to boot on the board at very early stage with only uncompressing message shown up like below.
Uncompressing Linux... done, booting the kernel. And it's not a LSK 3.14 specific problem, I tried to build mainline 3.10, 3.14 and 3.18-rc4 with the android-toolchain, and they all failed to boot. I need some help to understand if it's a valid use case at all, before I try to looking into the problem. Thanks, Shawn _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
