On 27 May 2014 10:17, Denys Dmytriyenko <de...@denix.org> wrote: > Hi, > > I've been having this issue with latest binary Linaro 2014.04 toolchain from > http://releases.linaro.org/14.04/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.8-2014.04_linux.tar.xz > > It comes with own sysroot, but linker fails to locate /lib/ld-linux-armhf.so.3 > > $ make > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o nvs.o > nvs.c > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o > misc_cmds.o misc_cmds.c > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o > calibrator.o calibrator.c > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o plt.o > plt.c > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o > wl18xx_plt.o wl18xx_plt.c > arm-linux-gnueabihf-gcc -I/tmp/include/libnl3/ -DCONFIG_LIBNL32 -c -o ini.o > ini.c > arm-linux-gnueabihf-gcc -L/tmp/lib/ nvs.o misc_cmds.o calibrator.o plt.o > wl18xx_plt.o ini.o -lm -lnl-3 -lnl-genl-3 -o calibrator > /opt/linaro-2014.04/bin/../lib/gcc/arm-linux-gnueabihf/4.8.3/../../../../arm-linux-gnueabihf/bin/ld: > cannot find /lib/ld-linux-armhf.so.3 > collect2: error: ld returned 1 exit status > Makefile:26: recipe for target 'all' failed > make: *** [all] Error 1 > > And when I pass my own sysroot, it works fine. > > Is it supposed to work as a standalone toolchain with its own bundled sysroot?
It should work as a standalone toolchain. Please check do you have ld-linux-armhf.so.3 at /opt/linaro-2014.04/arm-linux-gnueabihf/libc/lib/ If ld-linux-armhf.so.3 is there, please show us more detail log by adding option "-v" in your last step. Thanks! -Zhenqiang _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
