On 11 March 2014 13:45, Tom Gall <tom.g...@linaro.org> wrote: > Anyone with a VE board ever encounter something like this? >
Sounds like a power supply problem. I'd contact supp...@arm.com for help. > > > ---------- Forwarded message ---------- > From: Bibhuti Panigrahi <bibhuti.panigr...@linaro.org> > Date: Tue, Mar 11, 2014 at 5:14 AM > Subject: Issue while booting up VE board > To: Tom Gall <tom.g...@linaro.org> > > > Hi Tom, > I am finding below issues while booting the Versatile Express board. > The board boots and u-boot prompt comes but after that it gets powered > down because of exceeding power limit (seems to be some PMIC issue). > Please find the detailed log below: > > Cmd> > ARM V2M Boot loader v1.1.2 > HBI0190 build 2199 > > ARM V2M Firmware v3.1.1 > Build Date: Aug 20 2012 > > Date: Wed 13 Sep 2006 > Time: 05:38:05 > > Cmd> > > Powering up system... > Daughterboard fitted to site 1. > > Switching on ATXPSU... > ATX3V3: ON > VIOset: 1.8V > WARNING: PSU 1V0 : 0.79V (21% error) > > ERROR: PSU 1V0 outside limit, switching off... > > > Powering down, switching on UART0 bypass. > > Powering down... > Disabling debug USB. > Switching off ATX PSU. > Board powered down, use REBOOT to restart > Cmd> > > Please let me know if you have any pointer to this. > > Regards, > Bibhuti > > > -- > Regards, > Tom > > "Where's the kaboom!? There was supposed to be an earth-shattering > kaboom!" Marvin Martian > Tech Lead, Graphics Working Group | Linaro.org │ Open source software > for ARM SoCs > w) tom.gall att linaro.org > h) tom_gall att mac.com > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev >
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
