Hi Ryan, Thanks for your reply.
RootFS getting corrupted by repeated <Ctrl+C>: Does that mean we have some known limitations / stability issues with the foundation model (or rootfs)? This was not an issue for past 6 months and has only showed up recently after I used the custom image. So far I have generally launched the the model and used the model window itself to do build etc.. I remember having issues with doing SSH to the model from the host initially when I started using it. There was no steps mentioned in the user guide and I had tried various things without success. Few things I could do with the model were: 1. wget works 2. scp from host pc into the model works. 3. pinging an ip address from inside the model doesn't work (e.g "ping google.com" fails) So, I don't know completely if and how to connect to the model via ssh so that I can avoid having to close a hung process by <Ctrl+c>. Could you please point me to some resource? Thanks, Anil On 3 February 2014 22:03, Ryan Harkin <ryan.har...@linaro.org> wrote: > On 3 February 2014 13:38, Anil Singhar <anil.sing...@linaro.org> wrote: > > Hi, > > > > I am running into problems with starting foundation model lately. > > > > 1. I had created an image using > > > > linaro-image-lamp-genericarmv8-20140127-635.rootfs.tar.gz > > > > 2. It was booting fine initially. > > > > 3. The problem started happening after I attempted to build Groff > package, > > which was not getting build and the model was getting frozen (no > response to > > Ctrl + C, etc.). However I was able to restart the model by closing it > from > > the launch window and then restarting it. > > > > Now, the model simply fails to launch successfully (hangs in the middle, > > doesn't get to the command prompt). > > I suspect you've corrupted your rootfs by killing the model > repeatedly. Have you tried starting again with a "clean" rootfs, > built with linaro-media-create? If not, you should. > > Generally, I tend to SSH into my machines to run commands, rather than > using the serial terminal. And if a command locks a session, I log in > again via SSH and kill the old one, rather than pull the plug on the > model. > > > > > > > Anyone knows whom should I report to about this? > > This is a good place to discuss it. > > > > > Thanks, > > Anil > > > > _______________________________________________ > > linaro-dev mailing list > > linaro-dev@lists.linaro.org > > http://lists.linaro.org/mailman/listinfo/linaro-dev > > >
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
