On 17 October 2013 07:49, Fathi Boudra <fathi.bou...@linaro.org> wrote: > On 17 October 2013 17:37, Arun Thomas <arun.tho...@gmail.com> wrote: >> Thanks a lot, Fathi. And thanks to Andrey who also sent a response. >> >> I was able to check out the repo and create the config. Unfortunately, the >> uImage build fails with an error about a missing LOADADDR. Which LOADADDR >> should I use for the Pandaboard? I believe LOADADDR=0x80008000 is what's >> recommended for the Beagleboard. > > see below > >> Is the KernelDeploy page still accurate? Here's the recipe outlined in the >> page: >> >> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage > > zImage instead of uImage
Last time I tried bootz with pandaboard u-boot from Linaro hwpacks, it did not understand this command so zImage did not work for it I had to pull u-boot source tree and enable bootz configs (CONFIG_CMD_BOOTZ), only after that I was able to use zImage with Pandaboard. For Pandaboard uImage personally I use LOADADDR=0x80008000 make LOADADDR=0x80008000 uImage Thanks, Victor >> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules >> make ARCH=arm INSTALL_MOD_PATH=/media/rootfs/ modules_install >> make ARCH=arm INSTALL_FW_PATH=/media/rootfs/lib/firmware/ firmware_install >> cp arch/arm/boot/uImage /media/boot/ >> update-initramfs -c -k `uname -r` >> mkimage -A arm -T ramdisk -C none -n "MY RAMDISK" -d /boot/initrd.img-`uname >> -r` /mnt/uInitrd >> >> I'll have to change the `uname -r` invocations to the appropriate kernel >> version. >> >> I'm assuming I'll also have to build the device tree blob? > > make dtbs > >> Thanks again for all your help. >> >> Best, >> Arun >> >> >> >> >> >> I built the modules, modules_install, firmware_install targets. Then, I >> call update-initramfs and mkimage to create the ramdisk? Is there a separate >> step to build the FDT blob? >> >> Thanks again for the help, Andrey. I really appreciate it. I'd be happy to >> update the KernelDeploy wiki page based on the info you've provided, so you >> don't have to keep answering questions. >> >> [1] https://wiki.linaro.org/Resources/HowTo/KernelDeploy >> >> Best, >> Arun > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
