On 7 June 2013 16:00, Viresh Kumar <viresh.ku...@linaro.org> wrote:

> you need to cc spear-de...@list.st.com list for SPEAr patches.
>
> On 7 June 2013 11:33, Manjunath Goudar <manjunath.gou...@linaro.org>
> wrote:
> > Separate the  TI OHCI SPEAr host controller driver from ohci-hcd
>
> TI ??
>


not TI it should ST in second version.

>
> > host code so that it can be built as a separate driver module.
> > This work is part of enabling multi-platform kernels on ARM.
> >
> > Signed-off-by: Manjunath Goudar <manjunath.gou...@linaro.org>
> > Cc: Viresh Kumar <viresh.li...@gmail.com>
> > Cc: Arnd Bergmann <a...@arndb.de>
> > Cc: Greg KH <g...@kroah.com>
> > Cc: Alan Stern <st...@rowland.harvard.edu>
> > Cc: linux-...@vger.kernel.org
> > ---
> >  drivers/usb/host/Kconfig      |    8 +++
> >  drivers/usb/host/Makefile     |    1 +
> >  drivers/usb/host/ohci-hcd.c   |   22 +-----
> >  drivers/usb/host/ohci-spear.c |  149
> ++++++++++++++++++-----------------------
> >  4 files changed, 75 insertions(+), 105 deletions(-)
> >
> > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> > index f42db93..c347cb3 100644
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -403,6 +403,14 @@ config USB_OHCI_HCD_OMAP1
> >         ---help---
> >           Enables support for the OHCI controller on OMAP1/2 chips.
> >
> > +config USB_OHCI_HCD_SPEAR
> > +        tristate "Support for ST SPEAr on-chip OHCI USB controller"
> > +        depends on USB_OHCI_HCD && PLAT_SPEAR
> > +        default y
> > +        ---help---
> > +          Enables support for the on-chip OHCI controller on
> > +          ST SPEAr chips.
> > +
> >  config USB_OHCI_HCD_OMAP3
> >         tristate "OHCI support for OMAP3 and later chips"
> >         depends on (ARCH_OMAP3 || ARCH_OMAP4)
> > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> > index ceb4e55..1e0d83e 100644
> > --- a/drivers/usb/host/Makefile
> > +++ b/drivers/usb/host/Makefile
> > @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)   +=
> ohci-platform.o
> >  obj-$(CONFIG_USB_OHCI_EXYNOS)  += ohci-exynos.o
> >  obj-$(CONFIG_USB_OHCI_HCD_OMAP1)       += ohci-omap.o
> >  obj-$(CONFIG_USB_OHCI_HCD_OMAP3)       += ohci-omap3.o
> > +obj-$(CONFIG_USB_OHCI_HCD_SPEAR)       += ohci-spear.o
> >
> >  obj-$(CONFIG_USB_UHCI_HCD)     += uhci-hcd.o
> >  obj-$(CONFIG_USB_FHCI_HCD)     += fhci.o
> > diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> > index 8002bbe..27f0abe 100644
> > --- a/drivers/usb/host/ohci-hcd.c
> > +++ b/drivers/usb/host/ohci-hcd.c
> > @@ -1208,11 +1208,6 @@ MODULE_LICENSE ("GPL");
> >  #define OF_PLATFORM_DRIVER     ohci_hcd_ppc_of_driver
> >  #endif
> >
> > -#ifdef CONFIG_PLAT_SPEAR
> > -#include "ohci-spear.c"
> > -#define SPEAR_PLATFORM_DRIVER  spear_ohci_hcd_driver
> > -#endif
> > -
> >  #ifdef CONFIG_PPC_PS3
> >  #include "ohci-ps3.c"
> >  #define PS3_SYSTEM_BUS_DRIVER  ps3_ohci_driver
> > @@ -1248,6 +1243,7 @@ MODULE_LICENSE ("GPL");
> >         !IS_ENABLED(CONFIG_USB_OHCI_EXYNOS) && \
> >         !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP1) && \
> >         !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP3) && \
> > +       !IS_ENABLED(CONFIG_USB_OHCI_HCD_SPEAR) && \
> >         !defined(PLATFORM_DRIVER) &&    \
> >         !defined(OF_PLATFORM_DRIVER) && \
> >         !defined(SA1111_DRIVER) &&      \
> > @@ -1258,8 +1254,7 @@ MODULE_LICENSE ("GPL");
> >         !defined(EP93XX_PLATFORM_DRIVER) && \
> >         !defined(AT91_PLATFORM_DRIVER) && \
> >         !defined(NXP_PLATFORM_DRIVER) && \
> > -       !defined(DAVINCI_PLATFORM_DRIVER) && \
> > -       !defined(SPEAR_PLATFORM_DRIVER)
> > +       !defined(DAVINCI_PLATFORM_DRIVER)
> >  #error "missing bus glue for ohci-hcd"
> >  #endif
> >
> > @@ -1349,19 +1344,9 @@ static int __init ohci_hcd_mod_init(void)
> >                 goto error_davinci;
> >  #endif
> >
> > -#ifdef SPEAR_PLATFORM_DRIVER
> > -       retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER);
> > -       if (retval < 0)
> > -               goto error_spear;
> > -#endif
> > -
> >         return retval;
> >
> >         /* Error path */
> > -#ifdef SPEAR_PLATFORM_DRIVER
> > -       platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
> > - error_spear:
> > -#endif
> >  #ifdef DAVINCI_PLATFORM_DRIVER
> >         platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
> >   error_davinci:
> > @@ -1419,9 +1404,6 @@ module_init(ohci_hcd_mod_init);
> >
> >  static void __exit ohci_hcd_mod_exit(void)
> >  {
> > -#ifdef SPEAR_PLATFORM_DRIVER
> > -       platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
> > -#endif
> >  #ifdef DAVINCI_PLATFORM_DRIVER
> >         platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
> >  #endif
> > diff --git a/drivers/usb/host/ohci-spear.c
> b/drivers/usb/host/ohci-spear.c
> > index 6a7cb14..9e79d24 100644
> > --- a/drivers/usb/host/ohci-spear.c
> > +++ b/drivers/usb/host/ohci-spear.c
> > @@ -11,94 +11,41 @@
> >  * warranty of any kind, whether express or implied.
> >  */
> >
> > -#include <linux/signal.h>
> > -#include <linux/platform_device.h>
> > +#include <linux/dma-mapping.h>
> >  #include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> >  #include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/signal.h>
> > +#include <linux/usb.h>
> > +#include <linux/usb/hcd.h>
> > +#include <linux/debugfs.h>
> > +#include <linux/errno.h>
>
> In alphabetical order please. And please which ones of these are must
> to have.
>
>
Ok sure I will arrange in Alphabetical and unnecessary include will be
removing V2 version.

> >
> > -struct spear_ohci {
> > -       struct ohci_hcd ohci;
> > -       struct clk *clk;
> > -};
> > -
> > -#define to_spear_ohci(hcd)     (struct spear_ohci *)hcd_to_ohci(hcd)
> > -
> > -static void spear_start_ohci(struct spear_ohci *ohci)
> > -{
> > -       clk_prepare_enable(ohci->clk);
> > -}
> > -
> > -static void spear_stop_ohci(struct spear_ohci *ohci)
> > -{
> > -       clk_disable_unprepare(ohci->clk);
> > -}
> > -
> > -static int ohci_spear_start(struct usb_hcd *hcd)
> > -{
> > -       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> > -       int ret;
> > -
> > -       ret = ohci_init(ohci);
> > -       if (ret < 0)
> > -               return ret;
> > -       ohci->regs = hcd->regs;
> > -
> > -       ret = ohci_run(ohci);
> > -       if (ret < 0) {
> > -               dev_err(hcd->self.controller, "can't start\n");
> > -               ohci_stop(hcd);
> > -               return ret;
> > -       }
> > -
> > -       create_debug_files(ohci);
> > -
> > -#ifdef DEBUG
> > -       ohci_dump(ohci, 1);
> > -#endif
> > -       return 0;
> > -}
> > -
> > -static const struct hc_driver ohci_spear_hc_driver = {
> > -       .description            = hcd_name,
> > -       .product_desc           = "SPEAr OHCI",
> > -       .hcd_priv_size          = sizeof(struct spear_ohci),
> > -
> > -       /* generic hardware linkage */
> > -       .irq                    = ohci_irq,
> > -       .flags                  = HCD_USB11 | HCD_MEMORY,
> > -
> > -       /* basic lifecycle operations */
> > -       .start                  = ohci_spear_start,
> > -       .stop                   = ohci_stop,
> > -       .shutdown               = ohci_shutdown,
> > -#ifdef CONFIG_PM
> > -       .bus_suspend            = ohci_bus_suspend,
> > -       .bus_resume             = ohci_bus_resume,
> > -#endif
> > -
> > -       /* managing i/o requests and associated device resources */
> > -       .urb_enqueue            = ohci_urb_enqueue,
> > -       .urb_dequeue            = ohci_urb_dequeue,
> > -       .endpoint_disable       = ohci_endpoint_disable,
> >
> > -       /* scheduling support */
> > -       .get_frame_number       = ohci_get_frame,
> > +#include "ohci.h"
> >
> > -       /* root hub support */
> > -       .hub_status_data        = ohci_hub_status_data,
> > -       .hub_control            = ohci_hub_control,
> > +#define DRIVER_DESC "OHCI SPEAr driver"
> >
> > -       .start_port_reset       = ohci_start_port_reset,
> > +static const char hcd_name[] = "SPEAr-ohci";
> > +struct spear_ohci {
> > +       struct clk *clk;
> >  };
> >
> > +#define to_spear_ohci(hcd)     (struct spear_ohci
> *)(hcd_to_ohci(hcd)->priv)
> > +
> > +static struct hc_driver __read_mostly ohci_spear_hc_driver;
> >  static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
> >
> >  static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
> >  {
> >         const struct hc_driver *driver = &ohci_spear_hc_driver;
> > +       struct ohci_hcd *ohci;
> >         struct usb_hcd *hcd = NULL;
> >         struct clk *usbh_clk;
> > -       struct spear_ohci *ohci_p;
> > +       struct spear_ohci *sohci_p;
>
> why rename this?


renaming for making similarity with ehci-spear driver.



> >         struct resource *res;
> >         int retval, irq;
> >
> > @@ -151,16 +98,24 @@ static int spear_ohci_hcd_drv_probe(struct
> platform_device *pdev)
> >                 goto err_put_hcd;
> >         }
> >
> > -       ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
> > -       ohci_p->clk = usbh_clk;
> > -       spear_start_ohci(ohci_p);
> > -       ohci_hcd_init(hcd_to_ohci(hcd));
> > +       sohci_p = to_spear_ohci(hcd);
> > +       sohci_p->clk = usbh_clk;
> > +       hcd_to_ohci(hcd)->regs = hcd->regs;
> > +
> > +       ohci_setup(hcd);
> > +       clk_prepare_enable(sohci_p->clk);
> > +
> > +       ohci = hcd_to_ohci(hcd);
> > +
> > +#ifdef DEBUG
> > +       ohci_dump(ohci, 1);
> > +#endif
> >
> >         retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
> >         if (retval == 0)
> >                 return retval;
> >
> > -       spear_stop_ohci(ohci_p);
> > +       clk_disable_unprepare(sohci_p->clk);
> >  err_put_hcd:
> >         usb_put_hcd(hcd);
> >  fail:
> > @@ -172,11 +127,11 @@ fail:
> >  static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
> >  {
> >         struct usb_hcd *hcd = platform_get_drvdata(pdev);
> > -       struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> > +       struct spear_ohci *sohci_p = to_spear_ohci(hcd);
> >
> >         usb_remove_hcd(hcd);
> > -       if (ohci_p->clk)
> > -               spear_stop_ohci(ohci_p);
> > +       if (sohci_p->clk)
> > +               clk_disable_unprepare(sohci_p->clk);
> >
> >         usb_put_hcd(hcd);
> >         return 0;
> > @@ -188,13 +143,13 @@ static int spear_ohci_hcd_drv_suspend(struct
> platform_device *dev,
> >  {
> >         struct usb_hcd *hcd = platform_get_drvdata(dev);
> >         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> > -       struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> > +       struct spear_ohci *sohci_p = to_spear_ohci(hcd);
> >
> >         if (time_before(jiffies, ohci->next_statechange))
> >                 msleep(5);
> >         ohci->next_statechange = jiffies;
> >
> > -       spear_stop_ohci(ohci_p);
> > +       clk_disable_unprepare(sohci_p->clk);
> >         return 0;
> >  }
> >
> > @@ -202,13 +157,13 @@ static int spear_ohci_hcd_drv_resume(struct
> platform_device *dev)
> >  {
> >         struct usb_hcd *hcd = platform_get_drvdata(dev);
> >         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> > -       struct spear_ohci *ohci_p = to_spear_ohci(hcd);
> > +       struct spear_ohci *sohci_p = to_spear_ohci(hcd);
> >
> >         if (time_before(jiffies, ohci->next_statechange))
> >                 msleep(5);
> >         ohci->next_statechange = jiffies;
> >
> > -       spear_start_ohci(ohci_p);
> > +        clk_prepare_enable(sohci_p->clk);
> >         ohci_resume(hcd, false);
> >         return 0;
> >  }
> > @@ -234,4 +189,28 @@ static struct platform_driver spear_ohci_hcd_driver
> = {
> >         },
> >  };
> >
> > +static const struct ohci_driver_overrides spear_overrides __initconst =
> {
> > +       .extra_priv_size = sizeof(struct spear_ohci),
> > +};
> > +static int __init ohci_spear_init(void)
> > +{
> > +       if (usb_disabled())
> > +               return -ENODEV;
> > +
> > +       pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> > +
> > +       ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
> > +       return platform_driver_register(&spear_ohci_hcd_driver);
> > +}
> > +module_init(ohci_spear_init);
> > +
> > +static void __exit ohci_spear_cleanup(void)
> > +{
> > +       platform_driver_unregister(&spear_ohci_hcd_driver);
> > +}
> > +module_exit(ohci_spear_cleanup);
> > +
> > +MODULE_DESCRIPTION(DRIVER_DESC);
> > +MODULE_AUTHOR("Deepak Sikri");
> > +MODULE_LICENSE("GPL v2");
> >  MODULE_ALIAS("platform:spear-ohci");
>
> I can't really review it functionally.
>
> @Deepak: Can you?
>

Manjunath Goudar
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to