Currently the glmark2 is used to heat GPU for thermal test, this patch
consolidates launching glmark2 from serial console. The glmark2 heater is
optional now, which means no apparent fail will be reported if there is no
glmark2 or it cannot be launched.
Signed-off-by: Hongbo Zhang <hongbo.zh...@linaro.org>
---
include/thermal_functions.sh | 31 +++++++++++++++++++++++++++++++
thermal/thermal_03.sh | 15 ++-------------
thermal/thermal_06.sh | 17 +++--------------
3 files changed, 36 insertions(+), 27 deletions(-)
diff --git a/include/thermal_functions.sh b/include/thermal_functions.sh
index f385ec1..df7adfe 100644
--- a/include/thermal_functions.sh
+++ b/include/thermal_functions.sh
@@ -238,3 +238,34 @@ enable_all_thermal_zones() {
done
return 0
}
+
+GPU_HEAT_BIN=/usr/bin/glmark2
+gpu_pid=0
+
+start_glmark2() {
+ if [ -x $GPU_HEAT_BIN ]; then
+ $GPU_HEAT_BIN &
+ gpu_pid=$(pidof $GPU_HEAT_BIN)
+ # Starting X application from serial console needs this
+ if [ -z "$gpu_pid" ]; then
+ cp /etc/lightdm/lightdm.conf /etc/lightdm/lightdm.conf.bk
+ echo "autologin-user=root" >> /etc/lightdm/lightdm.conf
+ export DISPLAY=localhost:0.0
+ restart lightdm
+ sleep 5
+ mv /etc/lightdm/lightdm.conf.bk /etc/lightdm/lightdm.conf
+ $GPU_HEAT_BIN &
+ gpu_pid=$(pidof $GPU_HEAT_BIN)
+ fi
+ test -z "$gpu_pid" && cpu_pid=0
+ echo "start gpu heat binary $gpu_pid"
+ else
+ echo "glmark2 not found." 1>&2
+ fi
+}
+
+kill_glmark2() {
+ if [ "$gpu_pid" != 0 ]; then
+ kill -9 $gpu_pid
+ fi
+}
diff --git a/thermal/thermal_03.sh b/thermal/thermal_03.sh
index 5703ad3..ff8ca33 100755
--- a/thermal/thermal_03.sh
+++ b/thermal/thermal_03.sh
@@ -29,17 +29,13 @@ source ../include/functions.sh
source ../include/thermal_functions.sh
CPU_HEAT_BIN=../utils/heat_cpu
-GPU_HEAT_BIN=/usr/bin/glmark2
cpu_pid=0
-gpu_pid=0
heater_kill() {
if [ $cpu_pid != 0 ]; then
kill -9 $cpu_pid
fi
- if [ $gpu_pid != 0 ]; then
- kill -9 $gpu_pid
- fi
+ kill_glmark2
}
check_temperature_change() {
@@ -53,14 +49,7 @@ check_temperature_change() {
test -z $cpu_pid && cpu_pid=0
check "start cpu heat binary" "test $cpu_pid -ne 0"
- if [ -x $GPU_HEAT_BIN ]; then
- $GPU_HEAT_BIN &
- gpu_pid=$(ps | grep $GPU_HEAT_BIN| awk '{print $1}')
- test -z $gpu_pid && gpu_pid=0
- check "start gpu heat binary" "test $gpu_pid -ne 0"
- else
- echo "glmark2 not found." 1>&2
- fi
+ start_glmark2
sleep 5
local final_temp=$(cat $dirpath/temp)
diff --git a/thermal/thermal_06.sh b/thermal/thermal_06.sh
index 95eda91..13f695d 100755
--- a/thermal/thermal_06.sh
+++ b/thermal/thermal_06.sh
@@ -28,19 +28,15 @@
source ../include/functions.sh
source ../include/thermal_functions.sh
-CPU_HEAT_BIN=../utils/heat_cpu
-GPU_HEAT_BIN=/usr/bin/glmark2
TEST_LOOP=100
+CPU_HEAT_BIN=../utils/heat_cpu
cpu_pid=0
-gpu_pid=0
heater_kill() {
if [ $cpu_pid != 0 ]; then
kill -9 $cpu_pid
fi
- if [ $gpu_pid != 0 ]; then
- kill -9 $gpu_pid
- fi
+ kill_glmark2
}
check_trip_point_change() {
@@ -60,14 +56,7 @@ check_trip_point_change() {
test -z $cpu_pid && cpu_pid=0
check "start cpu heat binary" "test $cpu_pid -ne 0"
- if [ -x $GPU_HEAT_BIN ]; then
- $GPU_HEAT_BIN &
- gpu_pid=$(ps | grep $GPU_HEAT_BIN| awk '{print $1}')
- test -z $gpu_pid && gpu_pid=0
- check "start gpu heat binary" "test $gpu_pid -ne 0"
- else
- echo "glmark2 not found." 1>&2
- fi
+ start_glmark2
local index=0
for trip in $(ls $dirpath | grep "trip_point_['$MAX_ZONE']_temp"); do
--
1.8.0
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
