On Mon, Dec 03, 2012 at 11:42:55PM +0530, Rajanikanth H.V wrote: > From: "Rajanikanth H.V" <rajanikanth...@stericsson.com> > > ab8500_fg driver prepares instance list of fuelgauge which is > required by btemp driver for battery identification. So make sure > that ab8500 fuelgauge list is ready before btemp driver starts. > > for '3.7-rc5': of git://git.infradead.org/battery-2.6.git > > Acked-by: Lee Jones <lee.jo...@linaro.org> > Signed-off-by: Rajanikanth H.V <rajanikanth...@stericsson.com> > ---
This one, and "1/2 v2" applied, thanks! > drivers/power/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index 696e3a9..070c73d 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o > obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o > obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o > obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o > -obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o > ab8500_btemp.o ab8500_fg.o abx500_chargalg.o > +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o > ab8500_fg.o ab8500_btemp.o abx500_chargalg.o > obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o > obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o > obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o > -- > 1.7.10.4 _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
