On Fri, 2012-11-09 at 19:29 +0800, hongbo.zhang wrote: > From: "hongbo.zhang" <hongbo.zh...@linaro.com> > > This driver is based on the thermal management framework in thermal_sys.c. A > thermal zone device is created with the trip points to which cooling devices > can be bound, the current cooling device is cpufreq, e.g. CPU frequency is > clipped down to cool the CPU, and other cooling devices can be added and bound > to the trip points dynamically. The platform specific PRCMU interrupts are > used to active thermal update when trip points are reached. > > Signed-off-by: hongbo.zhang <hongbo.zh...@linaro.com> > Reviewed-by: Viresh Kumar <viresh.ku...@linaro.org> > Reviewed-by: Francesco Lavra <francescolavra...@gmail.com>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index e1cb6bd..54c8fd0 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -31,6 +31,26 @@ config CPU_THERMAL > and not the ACPI interface. > If you want this support, you should say Y here. > > +config DB8500_THERMAL > + bool "DB8500 thermal management" why is this bool? thanks, rui _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
