Hello,
I am trying to emulate beagleboard in qemu. I am using linaro 11.08
releases of nano rootfs and hwpack (this release is dated as on 2011/08/23)
and the version of linaro-media-create I am using is 2012.06. After I run
the following command, I do get a image generated but with the following
error. Due to this error after I run the image, I cannot mount the image. I
have pasted everything from the terminal till the end after I get the
error.
*$ sudo linaro-media-create --image_file beagle_sd.img --dev beagle
--binary nano-n-tar-20110823-1.tar.gz --hwpack
hwpack_linaro-omap3_20110823-0_armel_supported.tar.gz*
*proc has been unmounted
Sleeping for 1 second(s) to wait for the partition to settle
Disk beagle_sd.img: cannot get geometry
sfdisk: ERROR: sector 0 does not have an msdos signature
beagle_sd.img: unrecognized partition table type
No partitions found
Warning: beagle_sd.img is not a block device
Disk beagle_sd.img: cannot get geometry
sfdisk: ERROR: sector 0 does not have an msdos signature
beagle_sd.img: unrecognized partition table type
No partitions found
Warning: partition 1 does not end at a cylinder boundary
BLKRRPART: Inappropriate ioctl for device
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Sleeping for 1 second(s) to wait for the partition to settle
Disk beagle_sd.img: cannot get geometry
start: (c,h,s) expected (0,1,1) found (0,1,32)
end: (c,h,s) expected (6,160,25) found (25,127,31)
start: (c,h,s) expected (6,160,27) found (26,0,1)
end: (c,h,s) expected (391,159,24) found (1023,127,32)
partition ends on cylinder 1023, beyond the end of the disk
Formating boot partition
mkfs.vfat 3.0.12 (29 Oct 2011)
Loop device does not match a floppy size, using default hd params
Formating root partition
mke2fs 1.42 (29-Nov-2011)
Filesystem label=rootfs
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
193536 inodes, 773120 blocks
38656 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=792723456
24 block groups
32768 blocks per group, 32768 fragments per group
8064 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
`/tmp/tmpKKLnZe/binary/usr/lib/u-boot/omap3_beagle/u-boot.bin' ->
`/tmp/tmpKKLnZe/boot-disc/u-boot.bin'
`/tmp/tmpKKLnZe/binary/usr/lib/x-loader/omap3530beagle/MLO' ->
`/tmp/tmpKKLnZe/boot-disc/MLO'
Image Name: Linux
Created: Fri Oct 19 17:03:27 2012
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3836224 Bytes = 3746.31 kB = 3.66 MB
Load Address: 80008000
Entry Point: 80008000
Image Name: initramfs
Created: Fri Oct 19 17:03:27 2012
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 1853452 Bytes = 1810.01 kB = 1.77 MB
Load Address: 00000000
Entry Point: 00000000
Image Name: boot script
Created: Fri Oct 19 17:03:27 2012
Image Type: ARM Linux Script (uncompressed)
Data Size: 444 Bytes = 0.43 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 436 Bytes = 0.43 kB = 0.00 MB
`/tmp/tmpKKLnZe/boot-disc/boot.scr' -> `/tmp/tmpKKLnZe/boot-disc/boot.ini'
Populating rootfs partition
Be patient, this may take a few minutes
Creating /etc/flash-kernel.conf
Updating /etc/network/interfaces
Done creating Linaro image on beagle_sd.img
pshah9@ubuntu:~/Downloads/image$ *
I know this bug has been reported and the patch has been released by
Guilherme (bug # 701678 and here is the link to the patch file
https://launchpadlibrarian.net/62892999/udisks.diff ). The
linaro-image-tools version that the patch was released was for 0.4.2 but
this error still persist in 2012.06. And, I also tried if I can apply this
patch on my linaro-media-tool version, but I keep on getting error as the
source code has changed and so patch cant be applied.
And, there was another bug reported for linaro-image-tools that occurs with
the same command. This is not a error but it is warning about /bin/df (bug
# 651918):
*$ sudo linaro-media-create --image_file beagle_sd.img --dev beagle
--binary nano-n-tar-20110823-1.tar.gz --hwpack
hwpack_linaro-omap3_20110823-0_armel_supported.tar.gz
**/bin/df: Warning: cannot read table of mounted file systems: No such file
or directory*
*
*I get this warning little bit before the above error. I couldn't find any
solution for this problem as this bug remains unassigned on
launchpad.netwebsite.
So, can you please tell me how can I download the linaro-media-tool version
that was released after 0.4.2 and contains the above patch or if possible a
new patch for 2012.06? I am writing this email directly to this list as I
am using it for my thesis and wanted to get it solved as fast as possible.
Tejas
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
