On 09/17/2012 12:38 PM, Stefano Stabellini wrote: > Add a doc to describe the Xen ARM device tree bindings > > > Changes in v5: > > - add a comment about the size of the grant table memory region; > - add a comment about the required presence of a GIC node; > - specify that the described properties are part of a top-level > "hypervisor" node; > - specify #address-cells and #size-cells for the example. > > > Changes in v4: > > - "xen,xen" should be last as it is less specific; > - update reg property using 2 address-cells and 2 size-cells. > > > Signed-off-by: Stefano Stabellini <stefano.stabell...@eu.citrix.com> > CC: devicetree-disc...@lists.ozlabs.org > CC: David Vrabel <david.vra...@citrix.com> > CC: Rob Herring <robherri...@gmail.com> > CC: Dave Martin <dave.mar...@linaro.org>
This is so minimal now and it doesn't seem to have any overlap with kvm, so: Acked-by: Rob Herring <rob.herr...@calxeda.com> > --- > Documentation/devicetree/bindings/arm/xen.txt | 25 > +++++++++++++++++++++++++ > 1 files changed, 25 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/xen.txt > > diff --git a/Documentation/devicetree/bindings/arm/xen.txt > b/Documentation/devicetree/bindings/arm/xen.txt > new file mode 100644 > index 0000000..0f7b9c2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/xen.txt > @@ -0,0 +1,25 @@ > +* Xen hypervisor device tree bindings > + > +Xen ARM virtual platforms shall have a top-level "hypervisor" node with > +the following properties: > + > +- compatible: > + compatible = "xen,xen-<version>", "xen,xen"; > + where <version> is the version of the Xen ABI of the platform. > + > +- reg: specifies the base physical address and size of a region in > + memory where the grant table should be mapped to, using an > + HYPERVISOR_memory_op hypercall. The memory region is large enough to map > + the whole grant table (it is larger or equal to gnttab_max_grant_frames()). > + > +- interrupts: the interrupt used by Xen to inject event notifications. > + A GIC node is also required. > + > + > +Example (assuming #address-cells = <2> and #size-cells = <2>): > + > +hypervisor { > + compatible = "xen,xen-4.3", "xen,xen"; > + reg = <0 0xb0000000 0 0x20000>; > + interrupts = <1 15 0xf08>; > +}; > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev