On Wed, Jun 20, 2012 at 9:15 AM, Rob Lee <rob....@linaro.org> wrote: > Hello Sascha, > > On Wed, Jun 20, 2012 at 5:30 AM, Sascha Hauer <s.ha...@pengutronix.de> wrote: >> Hi Robert, >> >> On Mon, May 21, 2012 at 05:50:23PM -0500, Robert Lee wrote: >>> Cleanup up imx5 idle code and enable imx5 low powe idle for imx53. >>> >>> Add common imx cpuidle initialization functionality and add a i.MX5 and >>> i.MX6Q >>> platform cpuidle implementation. >> >> I rebased this to 3.5-rc1 here: >> >> git.pengutronix.de/git/imx/linux-2.6.git imx/cpuidle >> >> Could you check if the result is ok with you? >> > > Certainly. I will let you know in a day or two. >
I did some basic testing and everything looks ok as far as idle and cpuidle goes. For imx51 and 53 I tested both device tree and non-device tree boot. On my imx51-babbage board, a generic imx_v6_v7_defconfig does not boot without enabling device tree and shows no output after the u-boot messages. But this also occurs on the kernel.org v3.5-rc3. Removing support for all boards except imx51-babbage makes it boot up ok. The idle changes don't seem to affect this behavior. > Rob > >> Sascha >> >> >> -- >> Pengutronix e.K. | | >> Industrial Linux Solutions | http://www.pengutronix.de/ | >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
