Daniel Lezcano wrote:
> 
> The states are now part of the cpuidle_driver structure, so we can
> declare the states in this structure directly. That saves us an extra
> variable declaration and a memcpy.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezc...@linaro.org>
> ---
>  arch/arm/mach-s3c64xx/cpuidle.c |   33 ++++++++++++++-------------------
>  1 files changed, 14 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-
> s3c64xx/cpuidle.c
> index 179460f..2750e54 100644
> --- a/arch/arm/mach-s3c64xx/cpuidle.c
> +++ b/arch/arm/mach-s3c64xx/cpuidle.c
> @@ -51,33 +51,28 @@ static int s3c64xx_enter_idle(struct cpuidle_device
> *dev,
>       return index;
>  }
> 
> -static struct cpuidle_state s3c64xx_cpuidle_set[] = {
> -     [0] = {
> -             .enter                  = s3c64xx_enter_idle,
> -             .exit_latency           = 1,
> -             .target_residency       = 1,
> -             .flags                  = CPUIDLE_FLAG_TIME_VALID,
> -             .name                   = "IDLE",
> -             .desc                   = "System active, ARM gated",
> -     },
> -};
> +static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device);
> 
>  static struct cpuidle_driver s3c64xx_cpuidle_driver = {
> -     .name           = "s3c64xx_cpuidle",
> -     .owner          = THIS_MODULE,
> -     .state_count    = ARRAY_SIZE(s3c64xx_cpuidle_set),
> -};
> -
> -static struct cpuidle_device s3c64xx_cpuidle_device = {
> -     .state_count    = ARRAY_SIZE(s3c64xx_cpuidle_set),
> +     .name   = "s3c64xx_cpuidle",
> +     .owner  = THIS_MODULE,

I'd preferred to use original 'tab'

> +     .states = {
> +             {
> +                     .enter            = s3c64xx_enter_idle,
> +                     .exit_latency     = 1,
> +                     .target_residency = 1,
> +                     .flags            = CPUIDLE_FLAG_TIME_VALID,
> +                     .name             = "IDLE",
> +                     .desc             = "System active, ARM gated",
> +             },
> +     },
> +     .state_count = 1,
>  };
> 
>  static int __init s3c64xx_init_cpuidle(void)
>  {
>       int ret;
> 
> -     memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
> -            sizeof(s3c64xx_cpuidle_set));
>       cpuidle_register_driver(&s3c64xx_cpuidle_driver);
> 
>       ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
> --
> 1.7.5.4


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to