Hi Aneesh, Adding linaro-dev in the loop as someone else could be also interested
I have reproduced my thermal error with a lava test so you can have a complete log available here: http://validation.linaro.org/lava-server/scheduler/job/18564/log_file As a summary of the problem, the panda board turns off during some sysbench tests because the SDRAM has exceeded its temperature limit Regards, Vincent On 9 May 2012 14:43, Vincent Guittot <vincent.guit...@linaro.org> wrote: > Hi Aneesh, > > Sorry for this late replay. > > I'm working with the Linaro 12.04 developer image which is quite close > to the Linaro ubuntu one but without IHM. > Te manifest gives me the following information about the kernel > linux-image-3.3.1-38-linaro-lt-omap=3.3.1-38.38~lt~ci~00000000000001+1336186099~4fa4ad78 > which should be available here > :git://git.linaro.org/landing-teams/leb/ti/kernel.git > > This issue occurs each time I run some sysbench tests on my panda > board (revA1). I run several tests which are 20 seconds long and the > issue occurs after few minutes > > I've check with my finger and the package is quite hot when the issue occurs > > Regards, > Vincent > > On 7 May 2012 19:43, Aneesh V <ane...@ti.com> wrote: >> On 05/07/2012 10:38 AM, Mike Turquette wrote: >>> >>> On Thu, May 3, 2012 at 7:47 AM, Vincent Guittot >>> <vincent.guit...@linaro.org> wrote: >>>> >>>> Hi Amit and Mike, >>>> >>>> While stressing the dual cortex-A9 of my panda board ( omap4430 ) with >>>> the latest Linaro ubuntu developer environment, I reach the following >>>> message >>>> >>>> [ 824.996978] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 837.243957] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 839.045318] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 845.168518] emif emif.1: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 901.361663] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 902.082672] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 914.329620] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 925.496124] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 930.537292] emif emif.2: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 938.823333] emif emif.1: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 947.828857] emif emif.1: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 954.312072] emif emif.1: temperature alert before registers are >>>> calculated, not de-rating timings >>>> [ 982.047271] emif emif.2: SDRAM temperature exceeds operating >>>> limit.. Needs shut down!!! >>>> [ 982.072784] Power down. >>>> >>>> It is something you have already faced ? could something miss in the >>>> kernel ? >> >> >> That should not happen normally. If all is well, it should happen only >> if the temperature alert comes during a small window at bootup. Is that >> the case with you. Which tree and branch are you using. Please send me >> the details and I will take a look. >> >> br, >> Aneesh _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
