Hi, Linas Sorry, one thing I want to make sure is that you are using the android images from https://android-build.linaro.org/?
Hi, All If you have met such problems as below, please give your suggestion. Thanks, Yongqin Liu ---------- Forwarded message ---------- From: Linas Chang <shch...@marvell.com> Date: 2 May 2012 15:46 Subject: RE: adb question To: YongQin Liu <yongqin....@linaro.org> Hi YongQin**** ** ** I test more times , I found the case since be changed**** ** ** I found device hard to get ip , so I install a dhcp server at my computer , and ethnet connect to snowboard directly**** ** ** After device boot up , through your command “netcfg eth0 dhcp” ,I still can’t obtain IP **** ** ** But I found strange thing , even console show up “dhcp time out” ,but the log for dhcp server at my computer told me , it has assign a IP to snowboard , even snowboard console show dhcp time out**** ** ** At this case , I used fixed IP that same as my computer dhcp log said for snow board , I could ping device form host , and adb look ok ,connect and push also work**** ** ** But I need to connect to my server to do further thing , so I can’t used above method to fixed adb issue ,and if I connect to server I hard to know which IP server assign to snow board**** ** ** ** ** So do you have any idea why dhcp server assign IP to snowboard , but snowboard console still told me it can’t obtain IP from DHCP server**** ** ** ** ** ** ** Linas**** ** ** *From:* YongQin Liu [mailto:yongqin....@linaro.org] *Sent:* Tuesday, April 24, 2012 11:54 AM *To:* Linas Chang *Subject:* Re: adb question**** ** ** Hi, Linas**** On 24 April 2012 11:29, Linas Chang <shch...@marvell.com> wrote:**** Thanks for your help**** **** Currently , I could do the adb shell follow your instruction**** **** But I still can’t do adb push**** Could you paste your error information?**** >From this sentence, I think we can't see why it can't do the adb push command.**** ** ** And about the question below, I am sorry I can't give you any help.**** You can wait other members for help.**** ** ** Thanks,**** Yongqin Liu **** **** And I notice there are code dump during system boot up , I don’t build the linux BSP and android , I used pre-build binary , the code dump as below**** **** Another question , I found your product spec said , snowboard need 5V power , could you let me know which amp is device needed**** **** 9.562652] ------------[ cut here ]------------**** [ 9.567291] WARNING: at /mnt/jenkins/workspace/linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release/build/kernel/kernel/softirq.c:159 local_bh_enable_ip+0xa0/0xd4()**** [ 9.583129] Modules linked in: gator(O)**** [ 9.586975] [<c001d8a0>] (unwind_backtrace+0x0/0x144) from [<c05d9e2c>] (dump_stack+0x20/0x24)**** [ 9.595611] [<c05d9e2c>] (dump_stack+0x20/0x24) from [<c003378c>] (warn_slowpath_common+0x5c/0x74)**** [ 9.604553] [<c003378c>] (warn_slowpath_common+0x5c/0x74) from [<c00337d0>] (warn_slowpath_null+0x2c/0x34)**** [ 9.614227] [<c00337d0>] (warn_slowpath_null+0x2c/0x34) from [<c003af64>] (local_bh_enable_ip+0xa0/0xd4)**** [ 9.623687] [<c003af64>] (local_bh_enable_ip+0xa0/0xd4) from [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c)**** [ 9.633270] [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244)**** [ 9.642852] [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244) from [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180)**** [ 9.653106] [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180) from [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c)**** [ 9.663452] [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c) from [<c028bd0c>] (tty_wakeup+0x60/0x6c)**** [ 9.672332] [<c028bd0c>] (tty_wakeup+0x60/0x6c) from [<c02a71a8>] (uart_write_wakeup+0x28/0x30)**** [ 9.681030] [<c02a71a8>] (uart_write_wakeup+0x28/0x30) from [<c02aa1ac>] (pl011_int+0x518/0x5b0)**** [ 9.689819] [<c02aa1ac>] (pl011_int+0x518/0x5b0) from [<c00946d4>] (handle_irq_event_percpu+0x78/0x2e0)**** [ 9.699218] [<c00946d4>] (handle_irq_event_percpu+0x78/0x2e0) from [<c0094988>] (handle_irq_event+0x4c/0x6c)**** [ 9.709045] [<c0094988>] (handle_irq_event+0x4c/0x6c) from [<c00978cc>] (handle_fasteoi_irq+0xa8/0x168)**** [ 9.718444] [<c00978cc>] (handle_fasteoi_irq+0xa8/0x168) from [<c0093e70>] (generic_handle_irq+0x3c/0x50)**** [ 9.728027] [<c0093e70>] (generic_handle_irq+0x3c/0x50) from [<c0016058>] (handle_IRQ+0x5c/0xbc)**** [ 9.736816] [<c0016058>] (handle_IRQ+0x5c/0xbc) from [<c0008544>] (gic_handle_irq+0x34/0xb8)**** [ 9.745239] [<c0008544>] (gic_handle_irq+0x34/0xb8) from [<c0014c80>] (__irq_svc+0x40/0x70)**** [ 9.753601] Exception stack(0xed1d5d68 to 0xed1d5db0)**** [ 9.758636] 5d60: c090a880 00000000 ed1d5e6c c0029324 fffffffd 00000000**** [ 9.766815] 5d80: 00000000 ed1d5e6c 00000000 00000000 00000000 ed1d5dd4 c090a880 ed1d5db0**** [ 9.774993] 5da0: c005afa4 c0029324 20000013 ffffffff**** [ 9.780059] [<c0014c80>] (__irq_svc+0x40/0x70) from [<c0029324>] (qos_delayed_cpufreq_notifier+0x0/0xb8)**** [ 9.789550] [<c0029324>] (qos_delayed_cpufreq_notifier+0x0/0xb8) from [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70)**** [ 9.800506] [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70) from [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30)**** [ 9.811187] [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30) from [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc)**** [ 9.821899] [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc) from [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150)**** [ 9.832427] [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150) from [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4)**** [ 9.842681] [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4) from [<c03d29b8>] (do_dbs_timer+0x498/0x4b0)**** [ 9.852264] [<c03d29b8>] (do_dbs_timer+0x498/0x4b0) from [<c004f170>] (process_one_work+0x138/0x4ac)**** [ 9.861389] [<c004f170>] (process_one_work+0x138/0x4ac) from [<c004f88c>] (worker_thread+0x188/0x374)**** [ 9.870605] [<c004f88c>] (worker_thread+0x188/0x374) from [<c0054b64>] (kthread+0x98/0xa4)**** [ 9.878875] [<c0054b64>] (kthread+0x98/0xa4) from [<c0016318>] (kernel_thread_exit+0x0/0x8)**** [ 9.887237] ---[ end trace c0fe18d58f2dc323 ]---**** **** **** Linas**** **** *From:* YongQin Liu [mailto:yongqin....@linaro.org] *Sent:* Monday, April 23, 2012 7:48 PM *To:* Linas Chang *Cc:* linaro-andr...@lists.linaro.org *Subject:* Re: adb question**** **** Hi, Linas**** **** Maybe you can try following commands:**** **** ---------------------------------------------------------------------------------------------- **** netcfg eth0 dhcp #get your eth network up**** ifconfig eth0 #get your board IP **** echo 0>/sys/class/android_usb/android0/enable #enable adb via IP**** setprop service.adb.tcp.port 5555 #set the adb connection port**** stop adbd # restart adbd**** start adbd**** ---------------------------------------------------------------------------------------------- **** **** If the above commands work for you, please let me know.**** I will update the wiki then.**** **** Thanks,**** Yongqin Liu**** **** On 23 April 2012 19:06, Linas Chang <shch...@marvell.com> wrote:**** Dear linaro-support team**** **** Currently , I used linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release at your snowboard**** **** I face a question , that is**** **** When I used adb , follow below command form your web-site**** **** - ADB only works over IP In the console type:**** · stop adbd**** · setprop service.adb.tcp.port 6565**** · start adbd**** · ifconfig eth0 # to get boardsIP**** **** after my host connect to device**** , I try to used adb push –s <device IP>:6565 <my txt file> /data or adb –s <device ip>:6565 shell form host**** Both fail ,and I didn’t see any error meaage , it look like hang after I type above adb command**** **** Do you have any suggestion about this**** **** Thanks for your help**** **** Linas**** **** **** **** _______________________________________________ linaro-android mailing list linaro-andr...@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android**** **** ** **
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev