(2012年03月22日 15:45), Shawn Guo wrote:
>> + };
>> +
>> + regulator-1p1@110 {
>> + compatible = "fsl,anatop-regulator";
>> + regulator-name = "vdd1p1";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-always-on;
>> + reg = <0x110>;
>> + anatop-vol-bit-shift = <8>;
>> + anatop-vol-bit-width = <5>;
>> + anatop-min-bit-val = <4>;
>> + anatop-min-voltage = <800000>;
>> + anatop-max-voltage = <1400000>;
>
> 1.375V
Hi Shawn,
Sorry, why it is not 1.4V?
LDO 1p1 should be from range 0.8V to 1.4V on section 53.3.1
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
