W dniu 09.03.2012 13:41, Zygmunt Krynicki pisze:
Hi
Today morning I've noticed that my beagle C4 is not working well.
Update: it seems that SD card is working somewhat as without it U-Boot
does not load and none of the output is there. I'll try re-flashing that
card (brand new, used _once_) and check again.
This is the output a seen on serial:
(Also here: https://pastebin.linaro.org/424/)
40W
U-Boot SPL 2011.12 (Feb 16 2012 - 21:43:13)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
mmc_send_cmd: timedout waiting for cmddis!
** Can't read from device 0 **
spl: fat register err - -1
### ERROR ### Please RESET the board ###
The SD card is connected via uSD -> SD adapter and works fine in other
boards. I've tried re-attaching everything a dozen times.
Thanks
ZK
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
--
Zygmunt Krynicki
Linaro Validation Team
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
