On 02/17/2012 01:26 AM, Sudhangathan B S wrote:
I'm using Gumstix Overo-Fire.
I need to replicate my systems to deploy and test my setup. Right now I
have one uSD memory card which is working fine, but when I copy the
whole card using either the `tar cvpf` or dd commands, the image doesn't
work on any other memory card. Below is the console message when it
hangs. I have tried many memory cards.
Looks like Linaro images store the memory card ID and search for them
during the boot time, which will obviously fail on a different card.
Is there any way I can make my Linaro Image memory card independent....
so that my replication becomes easy..??
You could do something similar to the process we use to make pre-built
images. For example, your linaro-media-create line currently is probably
like:
linaro-media-create --dev overo --mmc /dev/sdb .......
You can change this to something like:
linaro-media-create --dev overo --image_file file.img --image_size 3G
This will create file.img which you could then "dd" to your SD cards.
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
