[PATCH 3/3] smsc95xx: use usleep_range(), get rid out of jiffies

[Dmitry Antipov]

Use usleep_range() with return value to implement time-bounded
wait-for hardware loop where delay is applicable; use ktime
instead of jiffies for a busy-wait loop.

Signed-off-by: Dmitry Antipov <dmitry.anti...@linaro.org>
---
 drivers/net/usb/smsc95xx.c |   52 ++++++++++++++++++++-----------------------
 1 files changed, 24 insertions(+), 28 deletions(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index d45520e..7264090 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -114,19 +114,18 @@ static int smsc95xx_write_reg(struct usbnet *dev, u32 
index, u32 data)
        return ret;
 }
 
-/* Loop until the read is completed with timeout
- * called with phy_mutex held */
+/* Busy-wait loop until the read is completed, but
+   no longer than 10ms. Called with phy_mutex held. */
 static int smsc95xx_phy_wait_not_busy(struct usbnet *dev)
 {
-       unsigned long start_time = jiffies;
+       ktime_t start = ktime_get();
        u32 val;
 
-       do {
+       while (ktime_us_delta(ktime_get(), start) < 10000) {
                smsc95xx_read_reg(dev, MII_ADDR, &val);
                if (!(val & MII_BUSY_))
                        return 0;
-       } while (!time_after(jiffies, start_time + HZ));
-
+       }
        return -EIO;
 }
 
@@ -195,15 +194,15 @@ static void smsc95xx_mdio_write(struct net_device 
*netdev, int phy_id, int idx,
 
 static int smsc95xx_wait_eeprom(struct usbnet *dev)
 {
-       unsigned long start_time = jiffies;
+       unsigned long timeout = 0;
        u32 val;
 
        do {
                smsc95xx_read_reg(dev, E2P_CMD, &val);
                if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
                        break;
-               udelay(40);
-       } while (!time_after(jiffies, start_time + HZ));
+               timeout += usleep_range(40, 50);
+       } while (timeout < USEC_PER_MSEC * 10);
 
        if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
                netdev_warn(dev->net, "EEPROM read operation timeout\n");
@@ -215,17 +214,15 @@ static int smsc95xx_wait_eeprom(struct usbnet *dev)
 
 static int smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
 {
-       unsigned long start_time = jiffies;
+       unsigned long timeout = 0;
        u32 val;
 
        do {
                smsc95xx_read_reg(dev, E2P_CMD, &val);
-
                if (!(val & E2P_CMD_BUSY_))
                        return 0;
-
-               udelay(40);
-       } while (!time_after(jiffies, start_time + HZ));
+               timeout += usleep_range(40, 50);
+       } while (timeout < USEC_PER_MSEC * 10);
 
        netdev_warn(dev->net, "EEPROM is busy\n");
        return -EIO;
@@ -674,7 +671,8 @@ static void smsc95xx_start_rx_path(struct usbnet *dev)
 
 static int smsc95xx_phy_initialize(struct usbnet *dev)
 {
-       int bmcr, timeout = 0;
+       int bmcr;
+       unsigned long timeout = 0;
 
        /* Initialize MII structure */
        dev->mii.dev = dev->net;
@@ -688,12 +686,11 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
        smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
 
        do {
-               msleep(10);
+               timeout += usleep_range(10000, 15000);
                bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
-               timeout++;
-       } while ((bmcr & BMCR_RESET) && (timeout < 100));
+       } while ((bmcr & BMCR_RESET) && (timeout < USEC_PER_SEC));
 
-       if (timeout >= 100) {
+       if (timeout >= USEC_PER_SEC) {
                netdev_warn(dev->net, "timeout on PHY Reset");
                return -EIO;
        }
@@ -717,7 +714,8 @@ static int smsc95xx_reset(struct usbnet *dev)
 {
        struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
        u32 read_buf, write_buf, burst_cap;
-       int ret = 0, timeout;
+       unsigned long timeout;
+       int ret = 0;
 
        netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
 
@@ -736,11 +734,10 @@ static int smsc95xx_reset(struct usbnet *dev)
                        netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", 
ret);
                        return ret;
                }
-               msleep(10);
-               timeout++;
-       } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+               timeout += usleep_range(10000, 15000);
+       } while ((read_buf & HW_CFG_LRST_) && (timeout < USEC_PER_SEC));
 
-       if (timeout >= 100) {
+       if (timeout >= USEC_PER_SEC) {
                netdev_warn(dev->net, "timeout waiting for completion of Lite 
Reset\n");
                return ret;
        }
@@ -759,11 +756,10 @@ static int smsc95xx_reset(struct usbnet *dev)
                        netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", 
ret);
                        return ret;
                }
-               msleep(10);
-               timeout++;
-       } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
+               timeout += usleep_range(10000, 15000);
+       } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < USEC_PER_SEC));
 
-       if (timeout >= 100) {
+       if (timeout >= USEC_PER_SEC) {
                netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
                return ret;
        }
-- 
1.7.7.5


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev