On Sun, Dec 18, 2011 at 10:05 PM, Andy Green <andy.gr...@linaro.org> wrote: > On 12/19/2011 12:17 AM, Somebody in the thread at some point said: >> >> Hi Ricardo, >> >> With working HDMI output on the original panda board, and Wei's new >> release of patches to alsa-lib and pulseaudio, I've updated both >> alsa-lib and pulseaudio for 11.12 in ppa:linaro-maintainers/overlay. >> Sound on the panda over HDMI from my testing works out of the box. >> It's not perfect but it works. I will repeat this same test with my >> imx53 shortly. >> >> >> For all on the dev list, be aware that audio is in a state of flux and >> while we'd like to avoid defects they are likely. The Multimedia WG is >> putting substantial effort into having a "just works" level of quality >> for supported boards. >> >> A very bit thank you is in order for Wei Feng for his hard work on >> 11.12! Good job! One small sound for an ARM board, but a big noise for >> Linaro when we can say, "It just works."
That's cool, still want to test the support, but nice to know that it's working at Panda. > That is indeed good news, thanks a lot guys. > > About Panda UCM, last week I noticed though that there is different wiring > on input side between 4430 Panda (line in goes to analogue headset mic > inputs on twl6040) and 4460 Panda (line in goes to FM analogue inputs). So > this week I plan to make changes to the onboard audio driver to change its > alsa card name based on what board it's on, with a view to elaborating out > the UCM directories so the recording case is handled correctly depending on > the board. > > At the moment, the two recording cases in UCM for Panda anyway are broken so > hopefully there'll be fixes for that too. Do you have any idea when you'll be pushing the new patches? Thanks, -- Ricardo Salveti de Araujo _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
