* Cousson, Benoit <b-cous...@ti.com> [111215 01:34]: > Hi Tony, > > On 12/15/2011 7:52 AM, Rajendra Nayak wrote: > >On Thursday 15 December 2011 12:55 AM, Tony Lindgren wrote: > >>* Rajendra Nayak<rna...@ti.com> [111214 03:24]: > >>>Pass minimal data needed for console boot, from dt, for > >>>OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the > >>>static initialization from generic board file. > >>> > >>>Acked-by: Rob Herring<rob.herr...@calxeda.com> > >>>Signed-off-by: Rajendra Nayak<rna...@ti.com> > >> > >>This we can't merge because this breaks serial console for > >>omap2 because you're not adding the omap2 specific dtsi > >>entries for omap2.. > > > >But we never had omap2 working with DT, because we never added > >a .dtsi file for omap2 or a .dts file for any omap2 board variants. > > > >Until now the DT support on OMAP has been limited to OMAP3 and OMAP4 > >with boards limited to omap3beagle/omap4Panda and omap4sdp. > > > >So when we do add base support for omap2, we could update those > >with the serial entries. > > I'm quite confused as well... Have you tried the current 3.2 kernel > on an OMAP2 board? > > So far I've been taking care of keeping the OMAP2 support into the > board-generic.c file, but I've never added any omap2.dtsi or > omap2-board.dts file to support it.
Yeah adding it is trivial, so let's just add it :) How about we just add the following patch before the last patch in this series? I don't have iva there as that's different between 2420 and 2430. But omap2.dtsi can be included later on into omap2420.dtsi and omap2430.dtsi. Regards, Tony From: Tony Lindgren <t...@atomide.com> Date: Thu, 15 Dec 2011 12:48:43 -0800 Subject: [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430 Signed-off-by: Tony Lindgren <t...@atomide.com> --- /dev/null +++ b/arch/arm/boot/dts/omap2.dtsi @@ -0,0 +1,67 @@ +/* + * Device Tree Source for OMAP2 SoC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + cpus { + cpu@0 { + compatible = "arm,arm1136jf-s"; + }; + }; + + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap2-mpu"; + ti,hwmods = "mpu"; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@1 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@0x4806a000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@0x4806c000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@0x4806e000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + }; +}; _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
