On 13 December 2011 10:50, Dave Pigott <dave.pig...@linaro.org> wrote:
> Hi all,
>
> Sorry for the wide distribution, but I've got a rather curious problem.
>
> I'm trying to get a Snowball V11 PDK working in the validation lab, and the
> only way to get it to boot on power-on is to power it over USB and control
> the power through a USB power adaptor. While this works admirably, the
> problem is that when I try to soft-reboot I get the usual:
>
> Broadcast message from root@master
> (/dev/ttyAMA2) at 15:48 ...
>
> The system is going down for reboot NOW!
>  * Asking all remaining processes to terminate...                        [
> OK ]
>  * All processes ended within 1 seconds....                              [
> OK ]
>  * Deconfiguring network interfaces...                                   [
> OK ]
>  * Deactivating swap...                                                  [
> OK ]
> umount: /run/lock: not mounted
>  * Will now restart
> [ 1279.346801] Restarting system.
>
>
> and then nothing. It just hangs and never comes back until I power cycle it.

Looks like this bug:
https://bugs.launchpad.net/linaro-landing-team-ste/+bug/872833

anmar

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to