The framebuffer driver needs the clock named 'lcd' as its bus
clock but the equivalent clock on Exynos4 is named as 'fimd'.
Hence, create a clkdev lookup entry with the name 'lcd' that
references the 'fimd' clock.
Signed-off-by: Tushar Behera <tushar.beh...@linaro.org>
---
arch/arm/mach-exynos/clock.c | 14 +++++++++-----
1 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5d8d483..607ec28 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -489,11 +489,6 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
@@ -782,6 +777,13 @@ static struct clk clk_pdma1 = {
.ctrlbit = (1 << 1),
};
+static struct clk clk_fimd0 = {
+ .name = "fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
@@ -1294,6 +1296,7 @@ static struct clksrc_clk *sysclks[] = {
static struct clk *clk_cdev[] = {
&clk_pdma0,
&clk_pdma1,
+ &clk_fimd0,
};
static struct clksrc_clk *clksrc_cdev[] = {
@@ -1318,6 +1321,7 @@ static struct clk_lookup exynos4_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+ CLKDEV_INIT("exynos4-fb.0", "lcd", &clk_fimd0),
};
static int xtal_rate;
--
1.7.4.1
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
