On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely <grant.lik...@secretlab.ca> wrote: > On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >> The patch 'arm/dt: Add dtb make rule' adds support to >> create a .dtb file. But this is never removed afterwards. >> Remove the generated .dtb file if 'distclean' is called. >> >> Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com> >> CC: Rob Herring <rob.herr...@calxeda.com> >> CC: Shawn Guo <shawn....@freescale.com> >> CC: Jason Liu <jason....@linaro.org> >> CC: Grant Likely <grant.lik...@secretlab.ca> > > Acked-by: Grant Likely <grant.lik...@secretlab.ca>
... although why are only the .dtb files needed in the clean list? How are the other built files cleaned? 'make clean' does remove the other images, but I don't know what the mechanism is. g. > >> --- >> arch/arm/boot/Makefile | 2 ++ >> 1 files changed, 2 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index 1cd9b0a..08f0d35 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >> >> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >> >> +clean-files := *.dtb >> + >> quiet_cmd_uimage = UIMAGE $@ >> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >> -C none -a $(LOADADDR) -e $(STARTADDR) \ >> -- >> 1.7.0.4 >> > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
