This patch adds support for thermal sensor driver. It supports 3 trigger
level. The first 2 level are warn and monitor temperature level. The
third critical trigger level resets the system. The threshold
change information is sent to the thermal interface layer.

Signed-off-by: SangWook Ju <sw...@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.kach...@linaro.org>
---
 arch/arm/mach-exynos4/include/mach/exynos4-tmu.h   |   75 ++++
 drivers/staging/Kconfig                            |    2 +
 drivers/staging/Makefile                           |    1 +
 drivers/staging/thermal_exynos4/sensor/Kconfig     |   14 +
 drivers/staging/thermal_exynos4/sensor/Makefile    |    4 +
 .../thermal_exynos4/sensor/exynos4210_tmu.c        |  465 ++++++++++++++++++++
 6 files changed, 561 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-exynos4/include/mach/exynos4-tmu.h
 create mode 100644 drivers/staging/thermal_exynos4/sensor/Kconfig
 create mode 100644 drivers/staging/thermal_exynos4/sensor/Makefile
 create mode 100644 drivers/staging/thermal_exynos4/sensor/exynos4210_tmu.c

diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-tmu.h 
b/arch/arm/mach-exynos4/include/mach/exynos4-tmu.h
new file mode 100644
index 0000000..dc7bf37
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-tmu.h
@@ -0,0 +1,75 @@
+/**
+ * exynos4-tmu.h - definitions of exynos4 specific thermal interface
+ *
+ *   Copyright (C) 2011 Samsung Electronics Co. ltd.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _EXYNOS4_TMU_H
+#define _EXYNOS4_TMU_H
+
+/**
+ * tmu_data - tmu driver private structure
+ * @t1: colling stop temperature.
+ * @dc_temp: Temperature base.
+ * @init_threshold: Initial threshold temperature.
+ * @mode: Compensation mode.
+ * @comp_threshold: compensated threshold temperature.
+ *
+ */
+struct tmu_data {
+       char    te1;
+       char    te2;
+       unsigned int    init_threshold;
+       int             mode;
+       int             cooling;
+       unsigned int    comp_threshold;
+       int             tmu_flag;
+};
+
+/**
+ * tmu_platform_device - tmu platform specific structure
+ * @id: Device id.
+ * @tmu_base: Memory register base.
+ * @dev: TMU device.
+ * @data: TMU driver private data structure.
+ *
+ */
+struct tmu_platform_device {
+       int                     id;
+       struct platform_device *pdev;
+       void __iomem            *tmu_base;
+       struct device           *dev;
+       struct tmu_data         data;
+       struct thermal_dev      *therm_fw;
+};
+
+#ifdef CONFIG_PM
+struct exynos4_tmu_register {
+       unsigned int regval_thresh_temp;
+       unsigned int regval_trig_lev0;
+       unsigned int regval_trig_lev1;
+       unsigned int regval_trig_lev2;
+       unsigned int regval_trig_lev3;
+       unsigned int regval_tmu_con0;
+       unsigned int regval_int_en;
+};
+#endif
+
+extern void exynos4_tmu_set_platdata(struct tmu_data *pd);
+extern struct tmu_platform_device *exynos4_tmu_get_platdata(void);
+extern int exynos4_tmu_get_irqno(int num);
+#endif /* _EXYNOS4_TMU_H */
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 2582e18..4376fed 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -148,4 +148,6 @@ source "drivers/staging/mei/Kconfig"
 
 source "drivers/staging/nvec/Kconfig"
 
+source "drivers/staging/thermal_exynos4/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 50d112f..24a2943 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -65,3 +65,4 @@ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)  += ste_rmi4/
 obj-$(CONFIG_DRM_PSB)          += gma500/
 obj-$(CONFIG_INTEL_MEI)                += mei/
 obj-$(CONFIG_MFD_NVEC)         += nvec/
+obj-$(CONFIG_SAMSUNG_THERMAL_INTERFACE) += thermal_exynos4/
diff --git a/drivers/staging/thermal_exynos4/sensor/Kconfig 
b/drivers/staging/thermal_exynos4/sensor/Kconfig
new file mode 100644
index 0000000..dcdd04b
--- /dev/null
+++ b/drivers/staging/thermal_exynos4/sensor/Kconfig
@@ -0,0 +1,14 @@
+#
+# Thermal Temp sensor configuration
+#
+
+config SENSORS_EXYNOS4_TMU
+       tristate "Samsung thermal sensor for exynos platform"
+       depends on ARCH_EXYNOS4
+       default n
+       help
+         Say Y here if you want to enable thermal sensor for samsung
+         exynos platform.
+
+         This driver can also be built as a module.  If so, the module
+         will be called exynos4210-tmu.
diff --git a/drivers/staging/thermal_exynos4/sensor/Makefile 
b/drivers/staging/thermal_exynos4/sensor/Makefile
new file mode 100644
index 0000000..4cdb818
--- /dev/null
+++ b/drivers/staging/thermal_exynos4/sensor/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for sensor chip drivers.
+#
+obj-$(CONFIG_SENSORS_EXYNOS4_TMU)+= exynos4210_tmu.o
diff --git a/drivers/staging/thermal_exynos4/sensor/exynos4210_tmu.c 
b/drivers/staging/thermal_exynos4/sensor/exynos4210_tmu.c
new file mode 100644
index 0000000..b125379
--- /dev/null
+++ b/drivers/staging/thermal_exynos4/sensor/exynos4210_tmu.c
@@ -0,0 +1,465 @@
+/**
+ * exynos4210_tmu.c - exynos4 thermal sensor driver
+ *
+ * Copyright (C) 2011 Samsung Electronics Co. ltd.
+ *    Author: SangWook Ju <sw...@samsung.com>
+ *    Author: Amit Daniel Kachhap <amit.kach...@linaro.org>
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <mach/regs-tmu.h>
+#include <mach/exynos4-tmu.h>
+#include <mach/thermal_interface.h>
+
+#define INIT_THRESHOLD 80
+/*Monitor temp = INIT_THRESHOLD + TRIGGER_LEV0 = 85*/
+#define        TRIGGER_LEV0 5
+/*Warning temp = INIT_THRESHOLD + TRIGGER_LEV1 = 100*/
+#define        TRIGGER_LEV1 20
+/*Panic temp = INIT_THRESHOLD + TRIGGER_LEV2 = 110*/
+#define        TRIGGER_LEV2 30
+#define        TRIGGER_LEV3 0xFF
+
+#define EFUSE_MIN_VALUE 60
+#define EFUSE_AVG_VALUE 80
+#define EFUSE_MAX_VALUE 100
+
+#define VREF_SLOPE             0x07000F02
+#define TMU_EN                 0x1
+#define TMU_DC_VALUE           25
+
+enum tmu_status_t {
+       TMU_STATUS_NORMAL = 0,
+       TMU_STATUS_MONITOR,
+       TMU_STATUS_WARNING,
+       TMU_STATUS_PANIC,
+};
+
+static struct resource *exynos4_tmu_mem;
+static struct workqueue_struct  *tmu_wq;
+static struct delayed_work tmu_work;
+
+#ifdef CONFIG_PM
+static struct exynos4_tmu_register tmu_register_save;
+#endif
+
+static int irq_tmu = NO_IRQ;
+static struct tmu_platform_device *tmu_dev_t;
+
+/**
+ * exynos4_tmu_readb - read a byte value from the given register.
+ * @tmu_dev: The tmu device structure.
+ * @reg: Register.
+ *
+ * Read a byte value from the given register.
+ */
+static unsigned int exynos4_tmu_readb(struct tmu_platform_device *tmu_dev,
+                                               unsigned int reg)
+{
+       return __raw_readb(tmu_dev->tmu_base + reg);
+}
+
+/**
+ * exynos4_tmu_writeb - write a byte value to the given register.
+ * @tmu_dev: The tmu device structure.
+ * @reg: Register.
+ * @val: Value to write.
+ *
+ * write a byte value to the given register.
+ */
+static void exynos4_tmu_writeb(struct tmu_platform_device *tmu_dev,
+                                       unsigned int reg, unsigned int val)
+{
+       __raw_writeb(val, tmu_dev->tmu_base + reg);
+}
+
+/**
+ * exynos4_tmu_readl - Read a long value from the given register.
+ * @tmu_dev: The tmu device structure.
+ * @reg: Register.
+ *
+ * Read a long value from the given register.
+ */
+static unsigned int exynos4_tmu_readl(struct tmu_platform_device *tmu_dev,
+                                               unsigned int reg)
+{
+       return __raw_readl(tmu_dev->tmu_base + reg);
+}
+
+/**
+ * exynos4_tmu_writel - write a long value to the given register.
+ * @tmu_dev: The tmu device structure.
+ * @reg: Register.
+ * @val: Value to write.
+ *
+ * write a long value to the given register.
+ */
+static void exynos4_tmu_writel(struct tmu_platform_device *tmu_dev,
+                                       unsigned int reg, unsigned int val)
+{
+       __raw_writel(val, tmu_dev->tmu_base + reg);
+}
+
+
+static int exynos4_tmu_current_temp(struct tmu_platform_device *tmu_dev)
+{
+       int temp;
+       temp = exynos4_tmu_readl(tmu_dev, CURRENT_TEMP)
+                       - tmu_dev->data.te1 + TMU_DC_VALUE;
+       return temp;
+}
+
+/**
+ * tmu_monitor - Timer handler for monitoring interrupt.
+ * @work: temp work.
+ *
+ * Timer handler for monitor/warning/panic interrupts.
+*/
+
+static void tmu_monitor(struct work_struct *work)
+{
+       exynos4_report_trigger();
+       enable_irq(irq_tmu);
+}
+
+int exynos4_tmu_read_temp(int *temp)
+{
+       *temp = 0;
+       if (tmu_dev_t)
+               *temp = exynos4_tmu_readl(tmu_dev_t, CURRENT_TEMP)
+                       - tmu_dev_t->data.te1 + TMU_DC_VALUE;
+       if (*temp > 0)
+               return 0;
+       else
+               return -EINVAL;
+}
+
+/*
+ * exynos4_tmu_initialize - Initializes the TMU driver.
+ * @pdev: The platform device structure.
+ *
+ * Initialises the different registers of the temperature sensor.
+ */
+static int exynos4_tmu_initialize(struct platform_device *pdev)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+       unsigned int en;
+       unsigned int te_temp;
+       unsigned int t_new;
+
+       en = (exynos4_tmu_readb(tmu_dev, TMU_STATUS) & 0x1);
+       if (!en) {
+               dev_err(&pdev->dev, "failed to start tmu drvier\n");
+               return -ENOENT;
+       }
+
+       /* Temperature compensation */
+       te_temp = exynos4_tmu_readl(tmu_dev, TRIMINFO);
+       tmu_dev->data.te1 = te_temp  & TRIM_TEMP_MASK;
+       tmu_dev->data.te2 = ((te_temp >> 8) & TRIM_TEMP_MASK);
+
+       if ((EFUSE_MIN_VALUE > tmu_dev->data.te1) ||
+                       (tmu_dev->data.te1 > EFUSE_MAX_VALUE) ||
+                       (tmu_dev->data.te2 != 0))
+               tmu_dev->data.te1 = EFUSE_AVG_VALUE;
+
+       t_new =  INIT_THRESHOLD + tmu_dev->data.te1 - TMU_DC_VALUE;
+
+       exynos4_tmu_writel(tmu_dev, THRESHOLD_TEMP, t_new);
+
+       /* Need to initialize regsiter setting after getting parameter info */
+       /* [28:23] vref [11:8] slope - Tunning parameter */
+       exynos4_tmu_writel(tmu_dev, TMU_CON0, VREF_SLOPE);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV0, TRIGGER_LEV0);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV1, TRIGGER_LEV1);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV2, TRIGGER_LEV2);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV3, TRIGGER_LEV3);
+       pr_info("TMU is initialized !!\n");
+       pr_info("Threshold temp: %dc Monitor temp: %dc\n",
+                       INIT_THRESHOLD,
+                       INIT_THRESHOLD + exynos4_tmu_readb(tmu_dev, TRG_LEV0));
+       pr_info("Warning temp: %dc Panic temp: %dc\n",
+                       INIT_THRESHOLD + exynos4_tmu_readb(tmu_dev, TRG_LEV1),
+                       INIT_THRESHOLD + exynos4_tmu_readb(tmu_dev, TRG_LEV2));
+       pr_info("Cooling temp: %dc\n",
+                       tmu_dev->data.cooling);
+}
+
+/**
+ * exynos4_tmu_start - Triggers the TMU driver.
+ * @pdev: The platform device structure.
+ *
+ * Triggers the temperature sensor.
+ */
+static void exynos4_tmu_start(struct platform_device *pdev)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+       unsigned int con, cur_temp;
+       exynos4_tmu_writel(tmu_dev, INTCLEAR,
+                       INTCLEAR0|INTCLEAR1|INTCLEAR2|INTCLEAR3);
+
+       /* TMU core enable */
+       con = exynos4_tmu_readl(tmu_dev, TMU_CON0);
+       con |= TMU_EN;
+       exynos4_tmu_writel(tmu_dev, TMU_CON0, con);
+
+       /*LEV0 LEV1 LEV2 interrupt enable */
+       exynos4_tmu_writel(tmu_dev, INTEN, (INTEN0|INTEN1|INTEN2));
+       usleep_range(200, 1000);
+       cur_temp = exynos4_tmu_current_temp(tmu_dev);
+       pr_info("Current Temperature : %dc\n\n", cur_temp);
+}
+/**
+ * exynos4_tmu_irq - IRQ handler for tmu interrupt.
+ * @irq: IRQ line.
+ * @id:        void data pointer for the tmu device.
+ *
+ * IRQ handler for  interrupt.
+*/
+static irqreturn_t exynos4_tmu_irq(int irq, void *id)
+{
+       struct tmu_platform_device *tmu_dev = (struct tmu_platform_device *)id;
+       unsigned int status;
+
+       disable_irq_nosync(irq);
+
+       status = __raw_readl(tmu_dev->tmu_base + INTSTAT);
+
+       if (status & INTSTAT0) {
+               pr_info("Monitor interrupt occured!!!!\n");
+               __raw_writel(INTCLEAR0, tmu_dev->tmu_base + INTCLEAR);
+               tmu_dev->data.tmu_flag = TMU_STATUS_MONITOR;
+               queue_delayed_work_on(0, tmu_wq, &tmu_work,
+                                                usecs_to_jiffies(10 * 1000));
+       } else if (status & INTSTAT1) {
+               pr_info("Warning interrupt occured!!!!\n");
+               __raw_writel(INTCLEAR1, tmu_dev->tmu_base + INTCLEAR);
+               tmu_dev->data.tmu_flag = TMU_STATUS_WARNING;
+               queue_delayed_work_on(0, tmu_wq, &tmu_work,
+                                                usecs_to_jiffies(10 * 1000));
+       } else if (status & INTSTAT2) {
+               pr_info("Panic interrupt occured!!!!\n");
+               __raw_writel(INTCLEAR2, tmu_dev->tmu_base + INTCLEAR);
+               tmu_dev->data.tmu_flag = TMU_STATUS_PANIC;
+               queue_delayed_work_on(0, tmu_wq, &tmu_work,
+                                                usecs_to_jiffies(10 * 1000));
+       } else {
+               pr_err("%s: TMU interrupt error\n", __func__);
+               return -ENODEV;
+       }
+
+       return IRQ_HANDLED;
+}
+
+/**
+ * exynos4_tmu_probe - device probe entry.
+ * @pdev: The device being probed.
+ */
+static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+       struct resource *res;
+       int ret;
+
+       pr_debug("%s: probe=%p\n", __func__, pdev);
+       irq_tmu = platform_get_irq(pdev, 0);
+       if (irq_tmu < 0) {
+               dev_err(&pdev->dev, "no irq for thermal monitor\n");
+               return -ENOENT;
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (res == NULL) {
+               dev_err(&pdev->dev, "failed to get memory region resource\n");
+               return -ENOENT;
+       }
+
+       exynos4_tmu_mem = request_mem_region(res->start,
+                                       res->end-res->start+1,
+                                       pdev->name);
+       if (exynos4_tmu_mem == NULL) {
+               dev_err(&pdev->dev, "failed to reserve memory region\n");
+               ret = -ENOENT;
+               goto err_nores;
+       }
+
+       tmu_dev->tmu_base = ioremap(res->start, (res->end - res->start) + 1);
+       if (tmu_dev->tmu_base == NULL) {
+               dev_err(&pdev->dev, "failed ioremap()\n");
+               ret = -EINVAL;
+               goto err_nomap;
+       }
+       tmu_dev->pdev = pdev;
+       tmu_dev->dev = &pdev->dev;
+
+       ret = request_irq(irq_tmu, exynos4_tmu_irq,
+                       IRQF_DISABLED,  "exynos4-tmu ", tmu_dev);
+       if (ret) {
+               dev_err(&pdev->dev, "IRQ%d error %d\n", irq_tmu, ret);
+               goto err_irq;
+       }
+
+       tmu_dev_t = tmu_dev;
+
+       exynos4_tmu_initialize(pdev);
+       if (ret)
+               goto err_nores;
+
+       exynos4_tmu_start(pdev);
+
+       exynos4_read_sensor = exynos4_tmu_read_temp;
+
+       return 0;
+err_irq:
+       iounmap(tmu_dev->tmu_base);
+err_nomap:
+       release_resource(exynos4_tmu_mem);
+err_nores:
+       return ret;
+}
+
+/**
+ * exynos4_tmu_remove - device remove entry.
+ * @pdev: The device being removed.
+ */
+static int __devinit exynos4_tmu_remove(struct platform_device *pdev)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+       free_irq(irq_tmu, tmu_dev);
+       iounmap(tmu_dev->tmu_base);
+       release_resource(exynos4_tmu_mem);
+       return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * exynos4_tmu_suspend - device suspend function.
+ * @pdev: The device being suspended.
+ * @state: suspend event message.
+ */
+static int exynos4_tmu_suspend(struct platform_device *pdev, pm_message_t 
state)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+
+       tmu_register_save.regval_thresh_temp =
+                       exynos4_tmu_readb(tmu_dev, THRESHOLD_TEMP);
+       tmu_register_save.regval_trig_lev0 =
+                       exynos4_tmu_readb(tmu_dev, TRG_LEV0);
+       tmu_register_save.regval_trig_lev1 =
+                       exynos4_tmu_readb(tmu_dev, TRG_LEV1);
+       tmu_register_save.regval_trig_lev2 =
+                       exynos4_tmu_readb(tmu_dev, TRG_LEV2);
+       tmu_register_save.regval_trig_lev3 =
+                       exynos4_tmu_readb(tmu_dev, TRG_LEV3);
+       tmu_register_save.regval_tmu_con0 =
+                       exynos4_tmu_readl(tmu_dev, TMU_CON0);
+       tmu_register_save.regval_int_en =
+                       exynos4_tmu_readl(tmu_dev, INTEN);
+       return 0;
+}
+
+/**
+ * exynos4_tmu_resume - device resume function.
+ * @pdev: The device being suspended.
+ */
+static int exynos4_tmu_resume(struct platform_device *pdev)
+{
+       struct tmu_platform_device *tmu_dev = platform_get_drvdata(pdev);
+
+       exynos4_tmu_writeb(tmu_dev, THRESHOLD_TEMP,
+                               tmu_register_save.regval_thresh_temp);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV0,
+                               tmu_register_save.regval_trig_lev0);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV1,
+                               tmu_register_save.regval_trig_lev1);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV2,
+                               tmu_register_save.regval_trig_lev2);
+       exynos4_tmu_writeb(tmu_dev, TRG_LEV3,
+                               tmu_register_save.regval_trig_lev3);
+       exynos4_tmu_writeb(tmu_dev, TMU_CON0,
+                               tmu_register_save.regval_tmu_con0);
+       exynos4_tmu_writel(tmu_dev, INTEN,
+                               tmu_register_save.regval_int_en);
+       exynos4_tmu_writel(tmu_dev, INTCLEAR,
+                               INTCLEAR0|INTCLEAR1|INTCLEAR2|INTCLEAR3);
+       return 0;
+}
+
+#else
+#define exynos4_tmu_suspend    NULL
+#define exynos4_tmu_resume     NULL
+#endif
+
+static struct platform_driver exynos4_tmu_driver = {
+       .probe          = exynos4_tmu_probe,
+       .remove         = exynos4_tmu_remove,
+       .suspend        = exynos4_tmu_suspend,
+       .resume         = exynos4_tmu_resume,
+       .driver         = {
+                       .name   = "exynos4-tmu",
+                       .owner  = THIS_MODULE,
+                       },
+};
+
+static int __init exynos4_tmu_driver_init(void)
+{
+       int ret = 0;
+       pr_info("EXYNOS4 TMU driver is loaded.\n");
+       tmu_wq = create_workqueue("tmu");
+       if (!tmu_wq) {
+               pr_err(" creation of tmu failed\n");
+               ret = -EFAULT;
+               goto out;
+       }
+       INIT_DELAYED_WORK_DEFERRABLE(&tmu_work, tmu_monitor);
+       ret = platform_driver_register(&exynos4_tmu_driver);
+       if (ret) {
+               pr_err("registeration of tmu_driver failed\n");
+               destroy_workqueue(tmu_wq);
+               goto out;
+       }
+out:
+       return ret;
+}
+
+static void __exit exynos4_tmu_driver_exit(void)
+{
+       destroy_workqueue(tmu_wq);
+       platform_driver_unregister(&exynos4_tmu_driver);
+}
+
+module_init(exynos4_tmu_driver_init);
+module_exit(exynos4_tmu_driver_exit);
+
+MODULE_AUTHOR("Samsung Electronics");
+MODULE_DESCRIPTION("EXYNOS4 temperature sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos4-tmu");
-- 
1.7.1


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to