Hi Kukjin,

On Wednesday 31 August 2011 06:23 AM, Kukjin Kim wrote:
Tushar Behera wrote:
-----Original Message-----
From: Tushar Behera [mailto:tushar.beh...@linaro.org]
Sent: Friday, August 26, 2011 6:39 PM
To: linux-samsung-...@vger.kernel.org
Cc: linaro-dev@lists.linaro.org; kgene....@samsung.com; patc...@linaro.org
Subject: [PATCH 2/3] ARM: EXYNOS4: Add support for secondary MMC port on
ORIGEN

Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support
for secondary MMC port is extended by registering sdhci instance 0.

Since sdhci instance 2 can contain a bootable media, sdhci instance 0
is registered after instance 2.

Would be helpful if above comments could be included in codes :)

Signed-off-by: Tushar Behera<tushar.beh...@linaro.org>
---
  arch/arm/mach-exynos4/Kconfig       |    1 +
  arch/arm/mach-exynos4/mach-origen.c |    7 +++++++
  2 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index e6925de..4c14d5e 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -229,6 +229,7 @@ config MACH_ORIGEN
        select CPU_EXYNOS4210
        select S3C_DEV_RTC
        select S3C_DEV_WDT
+       select S3C_DEV_HSMMC
        select S3C_DEV_HSMMC2
        select EXYNOS4_SETUP_SDHCI
        help
diff --git a/arch/arm/mach-exynos4/mach-origen.c
b/arch/arm/mach-exynos4/mach-
origen.c
index e280270..ae18812 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -72,6 +72,11 @@ static struct s3c2410_uartcfg origen_uartcfgs[]
__initdata = {
        },
  };

+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+       .cd_type                = S3C_SDHCI_CD_INTERNAL,
+       .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
  static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
        .cd_type                = S3C_SDHCI_CD_INTERNAL,
        .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
@@ -79,6 +84,7 @@ static struct s3c_sdhci_platdata origen_hsmmc2_pdata
__initdata = {

  static struct platform_device *origen_devices[] __initdata = {
        &s3c_device_hsmmc2,
+       &s3c_device_hsmmc0,
        &s3c_device_rtc,
        &s3c_device_wdt,
  };
@@ -93,6 +99,7 @@ static void __init origen_map_io(void)
  static void __init origen_machine_init(void)
  {
        s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+       s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
        platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
  }

--
1.7.4.1

OK, will apply.
If you don't mind, I will add comments the reason of the ordering when I
apply this.

Thanks. That would be great.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim<kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.



--
Tushar Behera

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to