On Wed, 22 Jun 2011 00:16:27 -0300, Ricardo Salveti <ricardo.salv...@linaro.org> wrote: > The unhandled fault shouldn't be related with the usb errors. From my > experience with Beagle xM the USB port will trigger the reset once the > disk is consuming more power than beagle can provide. As I know this > is probably a powered USB disk, it'd be good to check the same > hardware on another beagle to see if we're able to reproduce the > problem, as in the end it could be just a normal hardware failure.
I believe we have seen this on more than one of our builders (they have identical setups as far as I know). I think it has been confined mainly to one or two builders as they are the most frequently used. Would you still recommend a particular test here? > > I've heard a rumour that the problems are related to the USB subsytem > > and the USB hard disks, but nothing more concrete than that. They are > > running beagleXMs for what it is worth. > > Do you know why we're using beagle xM and not panda for the builders? Pandas weren't readily available when we set this up. > It'd also be good to have the correct board revision ID to know if the > xM is a prototype or a final release (A, A2, B or even C now). I'll ask. Thanks, James _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
