On Tue, 2011-06-21 at 07:29 -0600, John Rigby wrote:
> On Tue, Jun 21, 2011 at 7:25 AM, Andy Doan <andy.d...@linaro.org> wrote:
> > On 06/21/2011 04:53 AM, Dave Martin wrote:
> >> On Tue, Jun 21, 2011 at 12:52:12PM +0530, Amit Mahajan wrote:
> >>> > On Tue, 2011-06-21 at 12:14 +0530, Avik Sil wrote:
> >>>> > > On Tuesday 21 June 2011 12:06 PM, Amit Mahajan wrote:
> >>>>> > > > Hi,
> >>>>> > > >
> >>>>> > > > I have booted panda board using 11.05 natty release of ubuntu. It 
> >>>>> > > > worked
> >>>>> > > > great.
> >>>>> > > >
> >>>>> > > > Now, I am trying to compile the kernel myself. I am using the 
> >>>>> > > > sources
> >>>>> > > > from tarball provided on 11.05 release page as well as from 
> >>>>> > > > linaro git
> >>>>> > > > 2.6.38 tree.
> >>>>> > > >
> >>>>> > > >
> >>>>> > > > I have extracted the .config from running ubuntu(of 11.05 LEB) 
> >>>>> > > > and using
> >>>>> > > > it to compile my own kernels. Then I am just replacing the uImage 
> >>>>> > > > on
> >>>>> > > > sdcard(generated using 11.05 LEB) by my compiled kernel.
> >>>>> > > >
> >>>>> > > > Boot process goes fine till the init process but then it fails to 
> >>>>> > > > bring
> >>>>> > > > on the graphics and goes to console mode.
> >>>>> > > >
> >>>>> > > > Any help on this?
> >>>> > >
> >>>> > > You may want to install modules on the SD card too:
> >>>> > >
> >>>> > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
> >>>> > > INSTALL_MOD_PATH=/media/rootfs modules_install
> >>> >
> >>> > I am getting these errors while building the modules. I have linaro
> >>> > gcc-4.5.1. Is it related to older gcc?
> >>> >
> >>> >
> >>> >   AS      arch/arm/boot/compressed/lib1funcs.o
> >>> >   LD      arch/arm/boot/compressed/vmlinux
> >>> >   OBJCOPY arch/arm/boot/zImage
> >>> >   Kernel: arch/arm/boot/zImage is ready
> >>> > ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8974.ko]
> >>> > undefined!
> >>> > ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8940.ko]
> >>> > undefined!
> >>> > ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8510.ko]
> >>> > undefined!
> >>> > WARNING: modpost: Found 2 section mismatch(es).
> >>> > To see full details build your kernel with:
> >>> > 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> >>> > make[1]: *** [__modpost] Error 1
> >>> > make: *** [modules] Error 2
> >> John, do you know why the packaged kernel builds don't get these errors?
> >
> > I think this only happens when cross-compiling
> >
> 
> I don't see this when cross compiling the packaged kernel.  Perhaps my
> toolchain is an older rev?
> 

I confirm to get it with both gcc-4.5.1 and 4.5.2 from linaro toolchian
ppa's with both the kernel tarball from 11.05 release page as well as
from 2.6.38 kernel git with commit till linaro-11.05 tag.



-- 

Thanks
Amit Mahajan


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to