Due to the issue reported with ESDHC_CD_CONTROLLER mode as below,
GPIO mode becomes the best choice for card detection before the
issue gets addressed.

http://article.gmane.org/gmane.linux.ports.arm.kernel/120790

Signed-off-by: Shawn Guo <shawn....@linaro.org>
---
Actually the issue has been fixed with the v3 of the patch set as
below, but it's still the safest to use gpio mode for card detection
to let the monthly release go independently, since the fixing has
not got enough feedback yet.

http://thread.gmane.org/gmane.linux.ports.arm.kernel/121081

 arch/arm/mach-mx5/board-mx51_babbage.c |   14 +++++++++-----
 1 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c 
b/arch/arm/mach-mx5/board-mx51_babbage.c
index 6e6de47..ad693ec 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -41,6 +41,8 @@
 #define BABBAGE_POWER_KEY      IMX_GPIO_NR(2, 21)
 #define BABBAGE_ECSPI1_CS0     IMX_GPIO_NR(4, 24)
 #define BABBAGE_ECSPI1_CS1     IMX_GPIO_NR(4, 25)
+#define BABBAGE_SD1_CD         IMX_GPIO_NR(1, 0)
+#define BABBAGE_SD1_WP         IMX_GPIO_NR(1, 1)
 #define BABBAGE_SD2_CD         IMX_GPIO_NR(1, 6)
 #define BABBAGE_SD2_WP         IMX_GPIO_NR(1, 5)
 
@@ -141,9 +143,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
        MX51_PAD_SD1_DATA1__SD1_DATA1,
        MX51_PAD_SD1_DATA2__SD1_DATA2,
        MX51_PAD_SD1_DATA3__SD1_DATA3,
-       /* CD/WP from controller */
-       MX51_PAD_GPIO1_0__SD1_CD,
-       MX51_PAD_GPIO1_1__SD1_WP,
+       /* CD/WP gpio */
+       MX51_PAD_GPIO1_0__GPIO1_0,
+       MX51_PAD_GPIO1_1__GPIO1_1,
 
        /* SD 2 */
        MX51_PAD_SD2_CMD__SD2_CMD,
@@ -340,8 +342,10 @@ static const struct spi_imx_master mx51_babbage_spi_pdata 
__initconst = {
 };
 
 static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
-       .cd_type = ESDHC_CD_CONTROLLER,
-       .wp_type = ESDHC_WP_CONTROLLER,
+       .cd_gpio = BABBAGE_SD1_CD,
+       .wp_gpio = BABBAGE_SD1_WP,
+       .cd_type = ESDHC_CD_GPIO,
+       .wp_type = ESDHC_WP_GPIO,
 };
 
 static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
-- 
1.7.4.1


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to