On Tue, May 24, 2011 at 10:03 PM, Christian Robottom Reis
<k...@linaro.org> wrote:
> On Mon, May 23, 2011 at 09:51:04AM -0600, John Rigby wrote:
>> I have only seen this with the wireless problem already noted.  Can
>> you see if blacklisting the wireless driver fixes the problem?
>
> Hmmm. What wireless problem?
>
>> echo blacklist wl12xx_sdio > /etc/modeprobe.d/blacklist-wireless.conf
>> reboot
>
> The IGEPv2 doesn't use wl12xx; it uses the libertas (it's got a Marvell
> 88w8686 onboard).
>
> Just to be clear, wifi works fine on this device, out of the box.
>
> Isn't there a way to trigger a backtrace or dump of the hung kworker task?
>
> PS: I just boot-tested the latest 1003 kernel and it's working fine; in
> fact, I now get a flashing green light when the box is on, whereas
> before I used to get a dead led. The U-Boot issues I pointed out earlier
> are still there, though.

It seems that this issue was fixed with 1003 as soon as we disabled
cpu_freq for both Omap 3 and Omap 4. Didn't confirm, but that would be
the main change regarding Omap 3.

For Omap 4 the wlan driver was also causing similar issues.

Cheers,
-- 
Ricardo Salveti de Araujo

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to