This is the same problem that marcin and I have seen. See https://bugs.launchpad.net/ubuntu/+source/linux-linaro-omap/+bug/785739 the desktop starts fine for Marcin but I have seen it not start the desktop at all sometimes, it is erratic.
If I remove /lib/modules/2.6.38-1003-linaro-omap/kernel/drivers/net/wireless/wl12* everything else works. On Sat, May 21, 2011 at 2:07 PM, Jaswinder Singh <jaswinder.si...@linaro.org> wrote: > On 19 May 2011 00:01, John Rigby <john.ri...@linaro.org> wrote: >> Thanks to the heroic efforts of rsalveti the packaged >> linux-linaro-omap kernel now greatly improved omap4 display >> functionality. There is a .deb in the linaro-maintainers kernel ppa. >> If you have a panda board and have time to try it out your feedback >> would be much appreciated: >> >> https://launchpad.net/~linaro-maintainers/+archive/kernel/+files/linux-image-2.6.38-1003-linaro-omap_2.6.38-1003.4~ppa2_armel.deb >> > > Seems I am overlooking something, when others have reported success. > > I am facing problems using it. To be sure I also checked with today's > snapshots > linaro-n-ubuntu-desktop-tar-20110521-0.tar.gz + > hwpack_linaro-panda_20110521-0_armel_supported.tar.gz > > Installed 1003 release with > > a) root@linaro:~# dpkg -i > linux-image-2.6.38-1003-linaro-omap_2.6.38-1003.4~ppa2_armel.deb > b) Created uImage and uInitrd in boot partition using mkimage > > I could see Unity frozen over DVI port, though with resolution finer > than before. > Nothing when booted HDMI connected. > Mine is 1920x1080 ASUS laptop. > > FWIW, Ubuntu-11.04 natty armel release works fine at 1080. > > Thanks, > -Jassi > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
