Zach,

I would sign up for your session but I am flying out Thursday to make a 
customer meeting Friday.

I am not real familiar with the Panda or Beagle boards, and have never used 
one. I took a look at the Panda board schematics and it's using the standard 
14-pin JTAG connector, so all the standard CCS debug capabilities should be 
supported. 

I believe the Beagle board also uses the standard 14-pin JTAG connector. 

Here are a couple of links for debugging with the Beagle board:

http://processors.wiki.ti.com/index.php/Debugging_Beagle_with_an_XDS100
http://processors.wiki.ti.com/index.php/Debug_Access_Port_%28DAP%29

CCS will be supported on Linux. I have sent a request into our CCS Team to 
confirm the state of Linux support.

Regards,
Doug

-----Original Message-----
From: Zach Pfeffer [mailto:zach.pfef...@linaro.org] 
Sent: Wednesday, May 04, 2011 1:11 PM
To: Loïc Minier
Cc: Deao, Douglas; linaro-dev@lists.linaro.org
Subject: Re: STM at UDS-Budapest

Would you guys mind signing up for:

https://blueprints.launchpad.net/linaro-android/+spec/linaro-android-o-jtag

I think this topic would fit in well with that. Would you also mind
sending some info about JTAG support for Panada and Beagle and when
and if CCS will be supported on Linux?

-Zach

On 3 May 2011 06:37, Loïc Minier <loic.min...@linaro.org> wrote:
>        Hi
>
>  The attachment which was too big for the mailing-list is at:
>  http://people.linaro.org/~lool/STMLinuxDriverWhitePaper_Rev0%202S.pdf
>
>   Cheers
> --
> Loïc Minier
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to