On Sat, Apr 23, 2011 at 10:30:04PM -0600, Stephen Warren wrote:
> The following workflow:
>
> make dtbs
> make dtbuImage # See my earlier patch which adds this based on
> Jeremy Kerr's patch to add a dtbImage target.
>
> ... seems to require the *.dts file to be in arch/arm/boot/dts. I'm not
> sure if any other devicetree testing flows will be negatively affected by
> this change.
>
> Signed-off-by: Stephen Warren <swar...@nvidia.com>
Hmmm, I seem to have broken stuff. No time to sort it out now though.
Oh well. I'll try it again (hopefully) tomorrow.
g.
> ---
> arch/arm/boot/dts/tegra-harmony.dts | 110 +++++++++++++++++++++++++++++++-
> arch/arm/mach-tegra/board-harmony.dts | 113
> ---------------------------------
> 2 files changed, 108 insertions(+), 115 deletions(-)
> delete mode 100644 arch/arm/mach-tegra/board-harmony.dts
>
> diff --git a/arch/arm/boot/dts/tegra-harmony.dts
> b/arch/arm/boot/dts/tegra-harmony.dts
> index 81032e7..82fa0c2 100644
> --- a/arch/arm/boot/dts/tegra-harmony.dts
> +++ b/arch/arm/boot/dts/tegra-harmony.dts
> @@ -1,7 +1,113 @@
> +
> /dts-v1/;
> -/include/ "skeleton.dtsi"
>
> / {
> - model = "NVIDIA Tegra2 Harmony evaluation board";
> + model = "nVidia Harmony";
> compatible = "nvidia,harmony", "nvidia,tegra250";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&intc>;
> +
> + chosen {
> + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8
> root=/dev/mmcblk0p2 rw rootdelay=2";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = < 0x00000000 0x1C000000
> + 0x20000000 0x20000000 >;
> + };
> +
> + amba {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + intc: intc {
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + gpio: gpio@6000d000 {
> + compatible = "nvidia,tegra250-gpio";
> + reg = < 0x6000d000 0x1000 >;
> + interrupts = < 64 65 66 67 87 119 121 >;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + serial@70006000 {
> + compatible = "nvidia,tegra250-uart";
> + reg = <0x70006000 0x40>;
> + reg-shift = <2>;
> + interrupts = < 68 >;
> + status = "disabled";
> + };
> +
> + serial@70006040 {
> + compatible = "nvidia,tegra250-uart";
> + reg = <0x70006040 0x40>;
> + reg-shift = <2>;
> + interrupts = < 69 >;
> + status = "disabled";
> + };
> +
> + serial@70006200 {
> + compatible = "nvidia,tegra250-uart";
> + reg = <0x70006200 0x100>;
> + reg-shift = <2>;
> + interrupts = < 78 >;
> + status = "disabled";
> + };
> +
> + serial@70006300 {
> + compatible = "nvidia,tegra250-uart";
> + reg = <0x70006300 0x100>;
> + reg-shift = <2>;
> + interrupts = < 122 >;
> +
> + clock-frequency = < 216000000 >;
> + };
> +
> + serial@70006400 {
> + compatible = "nvidia,tegra250-uart";
> + reg = <0x70006400 0x100>;
> + reg-shift = <2>;
> + interrupts = < 123 >;
> + status = "disabled";
> + };
> +
> + sdhci@c8000000 {
> + compatible = "nvidia,tegra250-sdhci";
> + reg = <0xc8000000 0x200>;
> + interrupts = < 46 >;
> + status = "disabled";
> + };
> +
> + sdhci@c8000200 {
> + compatible = "nvidia,tegra250-sdhci";
> + reg = <0xc8000200 0x200>;
> + interrupts = < 47 >;
> + gpios = <&gpio 69 0>, /* cd, gpio PI5 */
> + <&gpio 57 0>, /* wp, gpio PH1 */
> + <&gpio 155 0>; /* power, gpio PT3 */
> + };
> +
> + sdhci@c8000400 {
> + compatible = "nvidia,tegra250-sdhci";
> + reg = <0xc8000400 0x200>;
> + interrupts = < 51 >;
> + status = "disabled";
> + };
> +
> + sdhci@c8000600 {
> + compatible = "nvidia,tegra250-sdhci";
> + reg = <0xc8000600 0x200>;
> + interrupts = < 63 >;
> + gpios = <&gpio 58 0>, /* cd, gpio PH2 */
> + <&gpio 59 0>, /* wp, gpio PH3 */
> + <&gpio 70 0>; /* power, gpio PI6 */
> + };
> };
> diff --git a/arch/arm/mach-tegra/board-harmony.dts
> b/arch/arm/mach-tegra/board-harmony.dts
> deleted file mode 100644
> index 82fa0c2..0000000
> --- a/arch/arm/mach-tegra/board-harmony.dts
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -
> -/dts-v1/;
> -
> -/ {
> - model = "nVidia Harmony";
> - compatible = "nvidia,harmony", "nvidia,tegra250";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&intc>;
> -
> - chosen {
> - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8
> root=/dev/mmcblk0p2 rw rootdelay=2";
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = < 0x00000000 0x1C000000
> - 0x20000000 0x20000000 >;
> - };
> -
> - amba {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - intc: intc {
> - interrupt-controller;
> - #interrupt-cells = <1>;
> - };
> - };
> -
> - gpio: gpio@6000d000 {
> - compatible = "nvidia,tegra250-gpio";
> - reg = < 0x6000d000 0x1000 >;
> - interrupts = < 64 65 66 67 87 119 121 >;
> - #gpio-cells = <2>;
> - gpio-controller;
> - };
> -
> - serial@70006000 {
> - compatible = "nvidia,tegra250-uart";
> - reg = <0x70006000 0x40>;
> - reg-shift = <2>;
> - interrupts = < 68 >;
> - status = "disabled";
> - };
> -
> - serial@70006040 {
> - compatible = "nvidia,tegra250-uart";
> - reg = <0x70006040 0x40>;
> - reg-shift = <2>;
> - interrupts = < 69 >;
> - status = "disabled";
> - };
> -
> - serial@70006200 {
> - compatible = "nvidia,tegra250-uart";
> - reg = <0x70006200 0x100>;
> - reg-shift = <2>;
> - interrupts = < 78 >;
> - status = "disabled";
> - };
> -
> - serial@70006300 {
> - compatible = "nvidia,tegra250-uart";
> - reg = <0x70006300 0x100>;
> - reg-shift = <2>;
> - interrupts = < 122 >;
> -
> - clock-frequency = < 216000000 >;
> - };
> -
> - serial@70006400 {
> - compatible = "nvidia,tegra250-uart";
> - reg = <0x70006400 0x100>;
> - reg-shift = <2>;
> - interrupts = < 123 >;
> - status = "disabled";
> - };
> -
> - sdhci@c8000000 {
> - compatible = "nvidia,tegra250-sdhci";
> - reg = <0xc8000000 0x200>;
> - interrupts = < 46 >;
> - status = "disabled";
> - };
> -
> - sdhci@c8000200 {
> - compatible = "nvidia,tegra250-sdhci";
> - reg = <0xc8000200 0x200>;
> - interrupts = < 47 >;
> - gpios = <&gpio 69 0>, /* cd, gpio PI5 */
> - <&gpio 57 0>, /* wp, gpio PH1 */
> - <&gpio 155 0>; /* power, gpio PT3 */
> - };
> -
> - sdhci@c8000400 {
> - compatible = "nvidia,tegra250-sdhci";
> - reg = <0xc8000400 0x200>;
> - interrupts = < 51 >;
> - status = "disabled";
> - };
> -
> - sdhci@c8000600 {
> - compatible = "nvidia,tegra250-sdhci";
> - reg = <0xc8000600 0x200>;
> - interrupts = < 63 >;
> - gpios = <&gpio 58 0>, /* cd, gpio PH2 */
> - <&gpio 59 0>, /* wp, gpio PH3 */
> - <&gpio 70 0>; /* power, gpio PI6 */
> - };
> -};
> --
> 1.7.1
>
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
