I'm trying to get this data from the Smarttop to show the SPDIF device but I get the same "No PulseAudio daemon running, or not running as session daemon." as Shawn.. under exactly the same operating system as Jason..
Is there a special place I need to be running this, in a certain shell? All I can figure is some environment variable is being stripped when I enter a shell.. Pulseaudio is definitely running.. (outputting over HDMI via a Yamaha 5.1 receiver, the boot sound is loud, and pulse is handling audio mixing..) Jason, what was the trick? :D -- Matt Sealey <m...@genesi-usa.com> Product Development Analyst, Genesi USA, Inc. On Sat, Apr 2, 2011 at 4:31 AM, Jason Hui <jason....@linaro.org> wrote: > Hi, Kurt, > > On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor <kurt.tay...@linaro.org> wrote: >> Hi everyone, >> >> I am trying to assemble a reference for the sound device specifics for all >> the platforms. The catch is that I don't have all the dev platforms >> available to me. >> >> Here is where you can help! I have Panda and Beagle C4. I need everything >> else. If you have access to other platform(s), please do the following and >> email the output to me. >> >> With a Linaro image or Ubuntu image (an image with with pulseaudio >> installed), run the following: "pacmd list-sinks" and email it to me. You >> will get an output that resembles this: >> > > Here is what I get: > > jason@jason-laptop:~$ dmesg | grep Machine > [ 0.000000] Machine: Genesi Efika MX (Smartbook) > > jason@jason-laptop:~$ cat /etc/issue > Ubuntu 10.10 \n \l > > jason@jason-laptop:~$ pacmd list-sinks > Welcome to PulseAudio! Use "help" for usage information. >>>> 1 sink(s) available. > * index: 0 > name: <alsa_output.platform-soc-audio.2.analog-stereo> > driver: <module-alsa-card.c> > flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY > state: SUSPENDED > suspend cause: IDLE > priority: 9009 > volume: 0: 82% 1: 82% > 0: -5.17 dB 1: -5.17 dB > balance 0.00 > base volume: 100% > 0.00 dB > volume steps: 65537 > muted: no > current latency: 0.00 ms > max request: 0 KiB > max rewind: 0 KiB > monitor source: 0 > sample spec: s16le 2ch 44100Hz > channel map: front-left,front-right > Stereo > used by: 0 > linked by: 0 > configured latency: 0.00 ms; range is 0.50 .. 139.32 ms > card: 0 <alsa_card.platform-soc-audio.2> > module: 4 > properties: > alsa.resolution_bits = "16" > device.api = "alsa" > device.class = "sound" > alsa.class = "generic" > alsa.subclass = "generic-mix" > alsa.name = "" > alsa.id = "SGTL5000 SGTL5000-0" > alsa.subdevice = "0" > alsa.subdevice_name = "subdevice #0" > alsa.device = "0" > alsa.card = "0" > alsa.card_name = "imx-3stack" > alsa.long_card_name = "imx-3stack (SGTL5000)" > device.bus_path = "platform-soc-audio.2" > sysfs.path = "/devices/platform/soc-audio.2/sound/card0" > device.string = "hw:0" > device.buffering.buffer_size = "24576" > device.buffering.fragment_size = "6144" > device.access_mode = "mmap+timer" > device.profile.name = "analog-stereo" > device.profile.description = "Analog Stereo" > device.description = "imx-3stack Analog Stereo" > module-udev-detect.discovered = "1" > device.icon_name = "audio-card" > ports: > analog-output: Analog Output (priority 9900) > analog-output-headphones: Analog Headphones (priority 9000) > active port: <analog-output> > >> >> Thanks in advance! >> >> Kurt Taylor (irc krtaylor) >> >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev >> >> > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
