On Thu, Mar 10, 2011 at 12:59:45PM +0800, Jason Liu wrote: > Signed-off-by: Jason Liu <jason....@linaro.org> > Signed-off-by: Jason Liu <r64...@freescale.com> > --- > drivers/net/fec.c | 13 +++++++++++++ > 1 files changed, 13 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/fec.c b/drivers/net/fec.c > index 02cdd71..fcb9768 100644 > --- a/drivers/net/fec.c > +++ b/drivers/net/fec.c > @@ -45,6 +45,9 @@ > #include <linux/phy.h> > #include <linux/fec.h> > > +#include <linux/of.h> > +#include <linux/of_address.h> > +
Should be mixed in with the rest of the linux/*.h includes (don't put a blank line between them. > #include <asm/cacheflush.h> > > #ifndef CONFIG_ARM > @@ -1523,6 +1526,13 @@ static const struct dev_pm_ops fec_pm_ops = { > }; > #endif > > +#ifdef CONFIG_OF > +static struct of_device_id fec_matches[] = { > + { .compatible = "fsl,imx-fec" }, Must have documentation for this binding in Documentation/devicetree/bindings before I can pick this up. Same goes for the uart driver patch. Also, I recommend being more specific on the compatible property. fsl,imx51-fec would be better. Newer parts can claim compatibility with this one if you're concerned about supporting multiple parts. ie. for imx 53, this would be appropriate: compatible = "fsl,imx53-fec", "fsl,imx51-fec"; > + {}, > +}; > +#endif > + > static struct platform_driver fec_driver = { > .driver = { > .name = DRIVER_NAME, > @@ -1530,6 +1540,9 @@ static struct platform_driver fec_driver = { > #ifdef CONFIG_PM > .pm = &fec_pm_ops, > #endif > +#ifdef CONFIG_OF > + .of_match_table = fec_matches, > +#endif > }, > .id_table = fec_devtype, > .probe = fec_probe, > -- > 1.7.1 > > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev