On Mon, Feb 28, 2011 at 1:00 PM, Jeremy Chang <jeremy.ch...@linaro.org> wrote:
> <inline...>
> On Sat, Feb 19, 2011 at 3:53 AM, Alexander Sack <a...@linaro.org> wrote:
>> On Fri, Feb 18, 2011 at 5:15 PM, Jim Huang <js...@0xlab.org> wrote:
>>> 2011/2/19 Alexander Sack <a...@linaro.org>:
>>>> On Fri, Feb 18, 2011 at 4:42 PM, Jim Huang <js...@0xlab.org> wrote:
>>> [...]
>>>>> To be precise, this patch works with Beagleboard-xM only.
>>>>> Beagleboard xM has one Ethernet port connected over USB, and the
>>>>> driver model makes it usable
>>>>> as a normal network device on device node, usb0. (Ethernet support for 
>>>>> USB )
>>>>>
>>>>> That is the reason why "usb0" is here.
>>>>
>>>> is this fatal for beagle C4? maybe we can make this gracefully fail
>>>> and if you plug in a USBNET device it starts working?
>>>
>>> hi Alexander,
>>>
>>> For Beagleboard C4, file  init.omap3.sh _could_ be the same once you
>>> already set up USB
>>> networking in host side.  However, it is hard to assume every desktop
>>> host provides DHCP
>>> server.
>>>
>>> Instead, people might expect to configure usbnet IP address manually.
>>> I think there is no
>>> technical problem of Jeremy's patch, and I just care about the usability.
>>
>> I think I used the wrong wording. What I really meant was whether
>>
>>  a) this patch causes problems on boot if there is no network device
>> attached to beagleboard
>    If no such network device, it will have "No such device" ioctl
> fail that should not cause problem on boot.
>
>>  b) would it start working if I plug in a USB LAN adapter to my beagleboard 
>> ;).
>    No. This is assuming that before booting the device the ethernet
> cable is plugged in and the interface is usb0. assuming usb0 is
> already there during the booting. or this still needs to be triggered
> somehow later when plugging the cable or LAN adapter after the
> booting.

Is there something like a network management service/framework in
android that could be improved to also consider LAN to achieve
always-online? I assume it currently reacts on wifi or 3g signal
becoming available/going away.

-- 

 - Alexander

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to