The uart ports are used as console and due to console_init, the uart ports
are initialized prior to the uart driver's probe function is called.
During this intialization stage, the driver obtains the default port
register values from the platform data.
This patch adds support for obtaining the default port register values
from the device tree. The default values should be specified in the
'chosen' node of the device tree.
Signed-off-by: Thomas Abraham <thomas.abra...@linaro.org>
---
drivers/tty/serial/samsung.c | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2335eda..66fece9 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -43,6 +43,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/of.h>
#include <asm/irq.h>
@@ -1384,11 +1385,24 @@ static int s3c24xx_serial_init_ports(struct
s3c24xx_uart_info **info)
struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
struct platform_device **platdev_ptr;
int i;
+ unsigned int *condefs , len;
+ struct s3c2410_uartcfg *cfg;
dbg("s3c24xx_serial_init_ports: initialising ports...\n");
platdev_ptr = s3c24xx_uart_devs;
+ condefs = (u32 *)of_get_property(of_chosen, "console-defaults", &len);
+ if (condefs && (len / sizeof(unsigned int)) == 3) {
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) {
+ cfg = s3c24xx_dev_to_cfg(&(*platdev_ptr)->dev);
+ cfg->ucon = be32_to_cpu(condefs[0]);
+ cfg->ulcon = be32_to_cpu(condefs[1]);
+ cfg->ufcon = be32_to_cpu(condefs[2]);
+ platdev_ptr++;
+ }
+ }
+ platdev_ptr = s3c24xx_uart_devs;
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++)
{
s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
}
--
1.6.6.rc2
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
