On Mon, Jan 31, 2011 at 11:57 AM, Avik Sil <avik....@linaro.org> wrote:
> Hi,
>
> I tried booting linux-linaro-2.6.37 kernel on my beagle board C4. I executed
> following:
>
> 1. Installed linaro on a 4 GB SD card using linaro-image-tools 0.4.1 with
> hwpack daily snapshot hwpack_linaro-omap3_20110125-0_armel_supported.tar.gz
> and linaro-natty-headless-tar-20101202-1.tar.gz. It was booting properly on
> my BB.
>
> 2. Cloned linux-linaro-2.6.37. Changed to source directory
>
> 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig

this one feels odd as beagle is omap3

>
> 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig (enabled
> EARLY_PRINTK)
>
> 5. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage
>
> 6. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules
>
> 7. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install
> INSTALL_MOD_PATH=/media/rootfs
>
> 8. cp arch/arm/boot/uImage /media/boot; sync
>
> Everything went on smoothly. Then I put the SD card on BB and powered it on.
> I got a kernel panic: http://paste.ubuntu.com/560562
>
> Please help me figuring out the problem. Is it because I didn't create
> uInitrd? If so, then how to create it for ARM?
>

yes, you also need to update uInitrd if you use the "default" linaro
boot cmdline.

short intro is:
12:22 < asac> aviksil: cp /usr/bin/qem-arm-static /mnt/rootfs/usr/bin/
12:22 < asac> aviksil: sudo chroot /mnt/rootfs
12:22 < asac> update-initramfs -kYOUR_KVERSION -c


-- 

 - Alexander

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to