I can't get my beagle xM to boot recent dailies at all. I used this command line:
sudo ./linaro-media-create --dev beagle --rootfs ext3 --mmc /dev/sdb \ --binary /home/mwh/Downloads/linaro-natty-headless-tar-20101214-0.tar.gz \ --hwpack /home/mwh/Downloads/hwpack_linaro-omap3_20101215-0_armel_supported.tar.gz \ --hwpack-force-yes (although I've tried a few others over the past few days) The serial console output gets this far: 4686489 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3704884 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 4686425 Bytes = 4.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK and then just hangs. A card I burnt a few months ago still boots fine. I'm starting to suspect my 'scratch' microSD card has given up the ghost, but I thought I'd ask here before I run out and buy another one. Cheers, mwh PS: can you buy non-crappy microSD cards in multi-packs anywhere? _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
