On Tue, 2010-12-07 at 17:53 +0530, Praveen Arkeri wrote: > Hi Guilherme, > > With headless build image I am still getting same errors as before with > missing u-boot.bin. > Detailed command log is here-->http://pastebin.com/ygRQRGe2
I don't see anything suspicious there, and I was able to create an image using the alip tarball. However, I'm using the latest linaro-media-create from lp:linaro-image-tools. Can you give that a try? https://wiki.linaro.org/Releases/MilestoneBuilds has the instructions > > -Praveen > > -----Original Message----- > From: Guilherme Salgado [mailto:salg...@canonical.com] > Sent: Tuesday, December 07, 2010 5:42 PM > To: Praveen Arkeri > Cc: linaro-dev@lists.linaro.org > Subject: Re: Linaro-Alpha-1:Unable to Create Boot Images > > Hi Praveen, > > On Tue, 2010-12-07 at 17:18 +0530, Praveen Arkeri wrote: > > Hi, > > I am trying to create boot images for vexpress platform following > > instructions mentioned here > > https://wiki.linaro.org/Releases/MilestoneBuilds. > > > > > > > > Daily Build & HwPack Images used: > > > > · > > http://releases.linaro.org/platform/linaro-n/headless/alpha-1/linaro-natty-headless-tar-20101202-1.tar.gz > > > > · > > http://releases.linaro.org/platform/linaro-n/hwpacks/alpha-1/vexpress/20101201/1/images/hwpack/hwpack_linaro-vexpress_20101201-1_armel_supported.tar.gz > > > > I was able to successfully create an image (although I can't boot it as > I don't have a vexpress board) using the two files above. > > > > > > > I am getting errors while installing images on SD card when I tried > > following command: > > > > > > > > sudo linaro-media-create --rootfs ext3 --mmc /dev/sdb --dev vexpress > > --binary linaro-natty-alip-tar-20101202-1.tar.gz --hwpack > > hwpack_linaro-vexpress_20101201-1_armel_supported.tar.gz > > Oh, here you're using the alip tarball instead of the headless one that > you listed above. I'm downloading it now and will try to create an > image using the same command as you did. > > > > > tar: binary/usr/lib/u-boot/ca9x4_ct_vxp/u-boot.bin: Not found in > > archive > > > > tar: Exiting with failure status due to previous errors > > > > Is there any chance there were other errors higher up? It'd be nice if > you could pastebin them. > > > I am not sure whether I am using right build images, can anyone point > > me to the working build images for vexpress platform. > > The tarballs you used should've worked, I think. > > -- Guilherme Salgado <https://launchpad.net/~salgado>
signature.asc
Description: This is a digitally signed message part
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
