Hello, Here are the minutes from today's LandingTeam meeting:
https://wiki.linaro.org/LandingTeams/Meetings/2010-10-06 --Matt === Attendees === * Torez Smith * Matt Waddel * Scott Bambrough * Loïc Minier * Anmar Oueja === Agenda === * Action items from last meeting. * Achievements / progress reports * OMAP3 * Versatile Express * deploy options for vexpress * New Business === Action Items === * Matt and Scott to discuss state of Vexpress MMC and then discuss issues with ARM * Loic to send a request for linaro-media-create rewrite to the infrastructure team. * Torez, IGEP display fix needs to be tested on a beagle-board (make sure there are no regression failures) * Torez to test powervr fixes on IGEP and Beagle - if they work they can be added to the hardware packs * Matt to contact ARM about ARM boot monitor deploy questions === Action Items from Previous Meeting === * Torez * Bad LCD on IGEPv2 - Patch posted - will investigate and try soon lp: 607250 * Tested patches - they fix the problem - waiting for patches to work through system * Matt * try to install busybox file system and see if that helps get to shell prompt faster * This filesystem doesn't actually exist yet, but initramfs is probably enough for this test * However a busybox only rootfs could be used as a test image during initial board bring-up * Check with Steve Langasek to see if this is on the radar. The headless is < 100M * Specs for flash support maybe in the next cycle * Try to point to /bin/sh instead of init * didn't help * Try install root FS onto USB stack instead of mmc. See if any of those help with speed of boot. * This helps === Minutes === * Vexpress - * bug LP: 632798 - MMC slowness bug * Try loading a file from the ARM boot monitor to see how long it takes to load from MMC versus flash * Add feature of linaro-media-create to deploy to USB for vexpress * Proposed that linaro-media-create be re-written in the infrastructure team * USB creator may be used as a deploy mechanism * Loic to send a request for this work to be done * OMAP3 * IGEP display fix needs to be tested on the beagle-board to make sure it doesn't break * Hardware pack installation for omap3 tested and works - needs lucid (not karmic) * IGEP wifi setup will be better once the display patch is installed * no other action required - no other instructions will be included * STX drivers * Torez worked with Nicolas Deshcne to get access to the binary drivers and kernel modules * Ricardo Salveti did some of this work for OMAP3 * Test on IGEP and Beagle - if they work they can be added to the hardware packs * Start keeping record of Vexpress issues in a wiki _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
